journal article·2023-11Open access

Sustainable recycling of aerospace-grade ultra-clean 7050 aluminum alloy melts through argon refining without secondary aluminum dross generation

Sen Du, Shengen Zhang, Jianwen Wang, Zhengfeng Lv, Zhiyuan Xu, Chen Liu, Jun Liu, Bo Liu

Abstract

The refining of aluminum scraps commonly employs nitrogen-fluxes to eliminate impurities. However, the aluminum nitride (AlN)generated by the reaction between nitrogen and the aluminum melt, along with residual fluxes, contribute to low cleanliness of the recycled aluminum melt and pose difficulties for the disposal of secondary aluminum dross (SAD) . Our innovative research has resulted in the recycling of aerospace-grade clean aluminum alloy melts. The results indicate that the argon bubble floating process adsorbs inclusions and hydrogen, achieving an aerospace-grade ultra-clean melt. The solid-liquid interface between the tube wall and the melt provides a diffusion channel for hydrogen atoms, and the bubbles rising up along the wall lead to a higher hydrogen content in the melt. The argon refining dross is primarily composed of Al and Al2O3, which can be recycled as a raw material for aluminum electrolysis. Argon refining can decrease the hydrogen content and the number of inclusions with particle size ≥40μm in the recycled aluminum melt to the level of aerospace aluminum alloy melt. Nonetheless, the particle size ≥20μm remains 1.5-2.5 times that of primary aluminum.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bauxite Residue and Utilization · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Improving aluminum recycling: a survey of sorting and impurity removal technologies10.1016/j.resconrec.2011.10.010 ↗
2. Aluminium use in passenger cars poses systemic challenges for recycling and GHG emissions10.1016/j.resconrec.2022.106827 ↗
3. Reck · Challenges Metal Recycl · 2012 · 337 · 690
4. Strategies for improving the sustainability of structural metals10.1038/s41586-019-1702-5 ↗
5. Environmental consequences of recycling aluminum old scrap in a global market, Resources10.1016/j.resconrec.2014.05.002 ↗
6. Schlesinger · 2007
7. A solid-state electrolysis process for upcycling aluminium scrap10.1038/s41586-022-04748-4 ↗
8. Optimization of toxic dye removal from contaminated water using chitosan-grafted novel nanocomposite adsorbent10.1016/j.molliq.2023.122763 ↗
9. Improving toxic dye removal and remediation using novel nanocomposite fibrous adsorbent10.1016/j.colsurfa.2023.131859 ↗
10. Chitosan-coated cotton fiber composite for efficient toxic dye encapsulation from aqueous media10.1016/j.apsusc.2023.157008 ↗
11. Green and robust adsorption and recovery of Europium(III) with a mechanism using hybrid donor conjugate materials10.1016/j.seppur.2023.124088 ↗
12. Facial conjugate adsorbent for sustainable Pb(II) ion monitoring and removal from contaminated water10.1016/j.colsurfa.2023.131794 ↗
13. Assessing of lead(III) capturing from contaminated wastewater using ligand doped conjugate adsorbent10.1016/j.cej.2015.12.078 ↗
14. Cleaning the arsenic(V) contaminated water for safe-guarding the public health using novel composite material10.1016/j.compositesb.2019.05.078 ↗
15. A facile composite material for enhanced cadmium(II) ion capturing from wastewater10.1016/j.jece.2019.103378 ↗
16. Fine-tuning mesoporous adsorbent for simultaneous ultra-trace palladium(II) detection, separation and recovery10.1016/j.jiec.2014.03.013 ↗
17. Optimization of an innovative composited material for effective monitoring and removal of cobalt(II) from wastewater10.1016/j.molliq.2019.112035 ↗
18. Naked-eye lead(II) capturing from contaminated water using innovative large-pore facial composite materials10.1016/j.microc.2019.104585 ↗
19. The heavy lanthanide of Thulium(III) separation and recovery using specific ligand-based facial composite adsorbent10.1016/j.colsurfa.2023.131415 ↗
20. Improving copper(II) ion detection and adsorption from wastewater by the ligand-functionalized composite adsorbent10.1016/j.molstruc.2023.135259 ↗
21. Assessing sustainable Lutetium(III) ions adsorption and recovery using novel composite hybrid nanomaterials10.1016/j.molstruc.2022.134795 ↗
22. Ligand based sustainable composite material for sensitive nickel(II) capturing in aqueous media10.1016/j.jece.2019.103591 ↗
23. Sustainable ligand-modified based composite material for the selective and effective cadmium(II) capturing from wastewater10.1016/j.molliq.2022.121125 ↗
24. Making sustainable aluminum by recycling scrap: the science of “dirty” alloys10.1016/j.pmatsci.2022.100947 ↗
25. Sustainable aluminium recycling of end-of-life products: a joining techniques perspective10.1016/j.jclepro.2017.12.235 ↗
26. Determination of fluoride component in the multifunctional refining flux used for recycling aluminum scrap10.1016/j.jmrt.2020.01.082 ↗
27. Forecasting global aluminium flows to demonstrate the need for improved sorting and recycling methods10.1016/j.wasman.2021.11.019 ↗
28. Mapping the global flow of aluminum: from liquid aluminum to end-use goods10.1021/es304256s ↗
29. A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross10.1016/j.jclepro.2018.01.079 ↗
30. An environmental-friendly method for recovery of aluminum droplets from aluminum dross: mechanical activation and super-gravity separation10.1016/j.psep.2023.05.045 ↗
31. Investigations on the hydrolysis behavior of AlN in the leaching process of secondary aluminum dross10.1016/j.hydromet.2018.10.015 ↗
32. Removal of nitrides and fluorides from secondary aluminum dross by catalytic hydrolysis and its mechanism
33. Life cycle environmental and economic assessment of alumina recovery from secondary aluminum dross in China10.1016/j.jclepro.2020.123291 ↗
34. Identification of recycling pathways for secondary aluminum dross with integrated hybrid life cycle assessment, Resources10.1016/j.resconrec.2023.106987 ↗
35. A new approach to recover the valuable elements in black aluminum dross10.1016/j.resconrec.2021.105768 ↗
36. Wrought and cast aluminum flows in China in the context of electric vehicle diffusion and automotive lightweighting, Resources10.1016/j.resconrec.2023.106877 ↗
37. Sustainability assessment of dismantling strategies for end-of-life aircraft recycling10.1016/j.resconrec.2015.08.005 ↗
38. Evaluation of recycling efforts of aircraft companies in Wichita10.1016/j.resconrec.2013.08.002 ↗
39. Recycling of aluminum – effect of fluoride additions on the salt viscosity and on the alumina dissolution10.1016/S1471-5317(01)00013-X ↗
40. Recycling of aluminium scrap for secondary Al-Si alloys10.1177/0734242X10381413 ↗
41. Effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings10.1016/S0924-0136(01)01229-8 ↗
42. Hydrogen trapping and embrittlement in high-strength Al alloys10.1038/s41586-021-04343-z ↗
43. Suppressed hydrogen embrittlement of high-strength Al alloys by Mn-rich intermetallic compound particles10.1016/j.actamat.2022.118110 ↗
44. Hydrogen - dislocation interactions in a low-copper 7xxx aluminium alloy: about the analysis of interrupted stress corrosion cracking tests10.1016/j.msea.2020.139654 ↗
45. The effect of solution aggressiveness on corrosion-induced mechanical properties degradation of aeronautical aluminum alloy 219810.1016/j.prostr.2022.12.215 ↗
46. The influence of oxide inclusions on the fluidity of Al–7wt.%Si alloy10.1016/j.msea.2005.08.175 ↗
47. 4 - hydrogen diffusion and trapping in metals
48. Dynamical quantum filtering in hydrogen–surface reactions10.1016/S0039-6028(98)00757-2 ↗
49. H2 dissociative adsorption on Mg, Ti, Ni, Pd and La Surfaces10.1016/j.susc.2004.06.003 ↗
50. Adsorption of a water molecule on the surface of neutral and charged titanium clusters: Tin-H2O, Tin+1-H2O, Tin-1-H2O, n ≤ 910.1016/j.molliq.2022.120953 ↗
51. Kasai · 2020
52. Effect of different valence metals doping on methane activation over La2O3(001) surface10.1016/S1872-5813(23)60343-3 ↗
53. Purification of aluminum melt in crucibles by bubble flotation10.1016/j.promfg.2019.12.071 ↗
54. Two-phase flow simulation for distinguishing deformable particles with a LiMCA system10.1016/j.apm.2020.06.015 ↗
55. Evaluation of methods for metal cleanliness assessment in die casting10.1016/j.jmatprotec.2007.03.013 ↗
56. Microstructure evolution and properties of 7075 aluminum alloy recycled from scrap aircraft aluminum alloys10.1016/j.jmrt.2022.05.011 ↗
57. Microstructure evolution of recycled 7075 aluminum alloy and its mechanical and corrosion properties10.1016/j.jallcom.2021.160407 ↗
58. Microstructure and mechanical properties of novel Al–Cu–Mg–Zn lightweight entropy alloys for elevated-temperature applications10.1016/j.matchar.2023.112927 ↗
59. Wettability of AlSi7Mg alloy on alumina, spinel, mullite and rutile and its influence on the aluminum melt filtration efficiency10.1016/j.matdes.2018.04.026 ↗