Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method
Source abstract
Abstract
Investigating the surface morphology and microstructure of laser powder bed fusion (L-PBF) in solidification and optimizing process parameters is crucial for improving the accuracy and performance of cladding parts of GH3536 superalloy. In this study, a computational model incorporating Computational Fluid Dynamics (CFD) and Discrete Element Method (DEM) was utilized to simulate the mesoscale evolution of the molten pool in L-PBF for GH3536 superalloy. Furthermore, the growth of columnar dendrites along the fusion boundary under transient conditions was simulated utilizing a quantitative phase-field model. The impact of scanning speed and laser power on temperature distribution, molten pool size, surface morphology of cladding layer, and columnar dendrite spacing during solidification of single-track L-PBF were examined. The findings suggest that the molten pool undergoes a fast process characterized by significant temperature gradients. Increasing the laser power or reducing the scanning speed results in higher maximum molten pool temperature, as well as increased molten pool depth and width. Overlarge or undersized scanning speed and laser power can result in poor surface quality of the cladding layer. When the laser power was 120 W and the scan speed was 0.4 m/s, the cladding layer exhibited improved surface morphology, with finer columnar dendrites observed at the molten pool's base. This study delved into understanding the evolution characteristics of the molten pool and the growth process of columnar dendrites at the molten pool's base, providing valuable insights for determining appropriate experimental process parameters for L-PBF of GH3536 superalloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Effects of annealing on microstructures and properties of cold-rolled GH3536 sheet10.1016/j.matchar.2021.111409 ↗
2. Nano-twin-induced exceptionally superior cryogenic mechanical properties of a Ni-based GH3536 (Hastelloy X) superalloy
3. Machine learning algorithms for defect detection in metal laser-based additive manufacturing: a review10.1016/j.jmapro.2021.12.061 ↗
4. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
5. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
6. Microstructure and corrosion properties of Al2CrFeCoxCuNiTi high entropy alloys prepared by additive manufacturing10.1016/j.jallcom.2021.161422 ↗
7. On the existence of orthorhombic martensite in a near-α titanium base alloy used for additive manufacturing
8. Rapid solidification of non-stoichiometric intermetallic compounds: modeling and experimental verification10.1016/j.actamat.2018.01.040 ↗
9. Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing10.1016/j.actamat.2022.118248 ↗
10. Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: modeling and applications10.1016/j.actamat.2018.08.008 ↗
11. Modeling and numerical studies of selective laser melting: multiphase flow, solidification and heat transfer10.1016/j.matdes.2020.109115 ↗
12. An overview of additive manufacturing technologies-A review to technical synthesis in numerical study of selective laser melting10.3390/ma13173895 ↗
13. Selective laser melting under variable ambient pressure: a mesoscopic model and transport phenomena10.1016/j.eng.2021.07.003 ↗
14. Numerical simulation and solidification characteristics for laser cladding of Inconel 71810.1016/j.optlastec.2021.107843 ↗
15. Multiphase mesoscopic simulation of multiple and functionally gradient materials laser powder bed fusion additive manufacturing processes
16. Understanding and design of metallic alloys guided by phase-field simulations10.1038/s41524-023-01038-z ↗
17. Development of phase-field modeling in materials science in China: a review10.1007/s40195-023-01593-w ↗
18. Coalescence of Al0.3CoCrFeNi polycrystalline high-entropy alloy in hot-pressed sintering: a molecular dynamics and phase-field study10.1038/s41524-023-01139-9 ↗
19. Co-precipitated Ni/Mn shell coated nano Cu-rich core structure: a phase-field study10.1016/j.jmrt.2022.09.032 ↗
20. Stability of phase boundary between L12-Ni3Al phases: a phase field study10.1016/j.intermet.2022.107528 ↗
21. From classical thermodynamics to phase-field method10.1016/j.pmatsci.2021.100868 ↗
22. Phase-field crystal simulation of evolution of liquid pools in grain boundary pre-melting regions10.1016/S1003-6326(21)65570-X ↗
23. Phase-field simulation of nano-α′ precipitates under irradiation and dislocations10.1016/j.jmrt.2022.11.165 ↗
24. Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys10.1016/j.actamat.2011.12.009 ↗
25. On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys10.1088/1361-651X/aa7369 ↗
26. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming10.1016/j.jallcom.2018.07.087 ↗
27. Multi-physics modeling and Gaussian process regression analysis of cladding track geometry for direct energy deposition10.1016/j.optlaseng.2019.105950 ↗
28. Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature10.1016/j.matdes.2021.110355 ↗
29. Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation10.1016/j.jmatprotec.2017.11.032 ↗
30. Volume of fluid (VOF) method for the dynamics of free boundaries10.1016/0021-9991(81)90145-5 ↗
31. Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion
32. Numerical analysis of powder bed generation and single track forming for selective laser melting of SS316L stainless steel10.1016/j.jmapro.2020.09.002 ↗
33. Fluid and particle dynamics in laser powder bed fusion10.1016/j.actamat.2017.09.051 ↗
34. Numerical simulation on melt pool and solidification in the direct energy deposition process of GH3536 powder superalloy10.1016/j.jmrt.2023.08.252 ↗
35. Microstructure and mechanical properties of crack-free ni-based gh3536 superalloy fabricated by laser solid forming10.1016/j.jallcom.2022.165950 ↗
36. Simulation of dendrite growth in the laser welding pool of aluminum alloy 2024 under transient conditions10.1016/j.jmatprotec.2017.03.005 ↗
37. Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process10.1016/j.jmst.2018.12.009 ↗
38. Thermal and solute diffusion in α-Mg dendrite growth of Mg-5wt.%Zn alloy: a phase-field study10.1016/j.jmrt.2023.05.024 ↗
39. Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: a phase field study10.1016/j.matdes.2022.110555 ↗
40. Dislocation motion in plastic deformation of nano polycrystalline metal materials: a phase field crystal method study10.1007/s42114-022-00522-2 ↗
41. Multiscale modeling of solidification:. Phase-field methods to adaptive mesh refinement10.1142/S0217979205032917 ↗
42. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
43. Macro-micro modeling and simulation on columnar grains growth in the laser welding pool of aluminum alloy10.1016/j.ijheatmasstransfer.2018.03.037 ↗
44. Research on the evolution mechanism of solidified structure during laser cladding IN718 alloy10.1016/j.applthermaleng.2022.118925 ↗
45. Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting10.1016/j.proeng.2011.11.130 ↗
46. Examination of molten pool with Marangoni flow and evaporation effect by simulation and experiment in selective laser melting10.1016/j.icheatmasstransfer.2021.105325 ↗
47. Numerical modelling of keyhole formation in selective laser melting of Ti6Al4V10.1016/j.jmapro.2021.01.005 ↗
48. On the influence of laser defocusing in Selective Laser Melting of 316L
49. Three-dimensional grain growth during multi-layer printing of a nickel-based alloy Inconel 718
50. Development mechanism and solidification morphology of molten pool generated by laser cladding10.1016/j.ijthermalsci.2020.106579 ↗
51. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
52. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition10.1126/sciadv.abf3039 ↗
53. Dual influences of deformation-induced W precipitates on dynamic recrystallization and fracture mechanism of the hot-extruded Mg-Y-Zn alloys: an experimental and phase field study10.1016/j.ijplas.2023.103772 ↗
54. Cooperative effect of strength and ductility processed by thermomechanical treatment for Cu-Al-Ni alloy10.1016/j.msea.2022.143485 ↗