journal article·2023-11Open access

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

Nengru Tao, Genyu Chen, Song Cai, Wenjun Fang, Zhengming Xiao

Abstract

Conventional mechanical drilling of thick carbon fiber reinforced plastic (CFRP) composite laminates is prone to machining-induced defects such as burrs, delamination, and severe tool wear. However, pulsed laser drilling as an improved strategy results in hole taper and the formation of a heat-affected zone (HAZ). Herein, a new laser-mechanical composite drilling process is proposed, which combines the advantages of pulsed laser drilling for avoiding tool wear and twist drilling for achieving high dimensional accuracy, significantly improving the drilling quality of thick CFRP laminates. The evolution mechanism of the hole taper and HAZ with processing conditions in pulsed laser drilling is investigated. Furthermore, a theoretical model is established to reveal the material removal mechanism during the reaming process. The thrust force variation, drilling quality and tool wear are analyzed and verified by comparative experiments. The results show that due to the shielding effect from the surface materials, the maximum hole taper and HAZ at the hole exit reach up to 37.5° and 650 μm, respectively, which can be removed effectively by subsequent reaming operations. Due to its small amount of material removal, the peak thrust force and the average thrust force in laser-mechanical drilling are only 53.8% and 37.6% of the critical thrust force of delamination, respectively, which can effectively inhibit delamination. Compared with direct twist drilling, the average wear of the main cutting edge in laser-mechanical drilling is decreased by 60.87%, which greatly reduces the size of the delamination by 55%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Laser Material Processing Techniques · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Laser beam machining of carbon fiber reinforced composites: a review10.1007/s00170-018-2978-6 ↗
2. Electric discharge drilling of micro holes in CFRP laminates10.1016/j.jmatprotec.2018.04.031 ↗
3. Open hole fatigue testing of laser machined MD-CFRP10.1016/j.compositesa.2018.05.005 ↗
4. Effects of drilling strategies for CFRP/Ti stacks on static mechanical property and fatigue behavior of open-hole CFRP laminates10.1016/j.jmapro.2021.01.036 ↗
5. Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks10.1007/s00170-016-8528-1 ↗
6. A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP)10.1016/j.compstruct.2016.08.004 ↗
7. Thrust force and delamination of core-saw drill during drilling of carbon fiber reinforced plastics (CFRP)10.1007/s00170-007-0963-6 ↗
8. Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill10.1016/j.compscitech.2009.01.025 ↗
9. Novel drill structure for damage reduction in drilling CFRP composites10.1016/j.ijmachtools.2016.08.006 ↗
10. Analytical force model for orthogonal machining of unidirectional carbon fibre reinforced polymers (CFRP) as a function of the fibre orientation10.1016/j.jmatprotec.2018.08.001 ↗
11. An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures10.1016/j.jmrt.2022.12.054 ↗
12. High performance drilling of T800 CFRP composites by combining ultrasonic vibration and optimized drill structure10.1016/j.ultras.2023.107097 ↗
13. Mechanical drilling force model for longitudinal ultrasonic vibration-assisted drilling of unidirectional CFRP10.1016/j.jmatprotec.2023.118091 ↗
14. A review on CFRP drilling: fundamental mechanisms, damage issues, and approaches toward high-quality drilling10.1016/j.jmrt.2023.05.023 ↗
15. Pulsed Nd:YAG laser beam drilling: a review10.1016/j.optlastec.2017.09.054 ↗
16. Thermal damage of CFRP laminate in fiber laser cutting process and its impact on the mechanical behavior and strain distribution10.1016/j.acme.2019.08.005 ↗
17. Analysis of process-induced damage in remote laser cut carbon fibre reinforced polymers10.1016/j.jmatprotec.2021.117162 ↗
18. Heat conduction analysis of laser CFRP processing with IR and UV laser light10.1016/j.compositesa.2015.12.009 ↗
19. UV laser high-quality drilling of CFRP laminate with a new interlaced scanning mode10.1016/j.compstruct.2021.114258 ↗
20. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites10.1007/s00339-016-9607-8 ↗
21. Dual-beam laser drilling process for thick carbon fiber reinforced plastic composites laminates10.1016/j.jmatprotec.2020.116590 ↗
22. Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates10.1007/s00170-017-0023-9 ↗
23. Poprawe · 2021 · 61
24. Laser cutting of carbon fibre reinforced plastics of high thickness10.1016/j.matdes.2015.12.056 ↗
25. Effects of tangential supersonic airflow on the laser ablation of laminated CFRP10.1016/j.jmrt.2021.07.101 ↗
26. Modeling and simulation on long pulse laser drilling processing10.1016/j.ijheatmasstransfer.2014.02.037 ↗
27. Finite element modeling of the laser cutting process10.1016/0045-7949(93)90104-L ↗
28. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
29. Heat affected zone extension in pulsed Nd:YAG laser cutting of CFRP10.1016/j.compositesb.2017.12.028 ↗
30. Numerical simulation of laser machining of carbon fibre reinforced composites10.1243/09544054JEM1662 ↗
31. Understanding the bowl-bottom effect in ultra-short pulsed laser drilling of CFRP laminate
32. Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: a review10.1016/j.compositesa.2019.105552 ↗
33. Drilling study on CFRP/Al stack with different CFRP thickness using chip-breaking step drill bit10.1016/j.jmapro.2023.01.050 ↗
34. A new method to reduce delaminations during drilling of FRP laminates by feed rate control10.1016/j.compstruct.2017.12.005 ↗
35. Drilled hole damage of small diameter drilling in printed wiring board10.1016/S0924-0136(01)00874-3 ↗
36. Drilling of composite structures10.1016/S0263-8223(01)00040-X ↗
37. Delamination during drilling in composite laminates
38. Chisel edge and pilot hole effects in drilling composite laminates10.1115/1.1448317 ↗
39. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates10.1016/S0890-6955(96)00095-8 ↗
40. Drilling of fiber reinforced plastics: a review10.1016/j.jmatprotec.2006.11.146 ↗
41. Drilling machinability evaluation on new developed high-strength T800S/250F CFRP laminates10.1007/s12541-013-0252-2 ↗
42. Drilling in carbon/epoxy composites: experimental investigations and finite element implementation10.1016/j.compositesa.2012.11.020 ↗
43. Analytical force model for drilling out unidirectional carbon fibre reinforced polymers (CFRP)
44. Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material10.1007/s00170-015-7284-y ↗
45. Novel chip-breaking structure of step drill for drilling damage reduction on CFRP/Al stack
46. Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites10.1016/j.wear.2015.05.009 ↗