Microstructure and mechanical properties of cold spray additive manufactured and post heat treated high-entropy alloys with mixed CoCrFeNi and Ti powders
Source abstract
Abstract
Solid-state cold spray additive manufacturing has the potential to fabricate high-strength bulk high-entropy alloys (HEAs). Through systematic experiments, this study examined the microstructure and mechanical properties of cold spray fabricated bulk HEAs with mixed CoCrFeNi and Ti powders and explored the effects of Ti content in 4 and 7 at% and post-heat treatment at 800 °C/6 h and 1000 °C/6 h. It is found that the bulk HEAs are highly densified and remain nearly defect-free after the post-heat treatment. The addition of Ti serves as an mixing powder effect to further densify the alloys. Moreover, the addition of Ti and post-heat treatment promote the formation of fine precipitates, including Fe2Ti, Co2Ti, CrFe, CoTi2, and Ni3Ti, which contributes to the strengthening of the alloys. Furthermore, post-heat treatment improves the cohesion of the alloys and yields fine and relatively uniform grains by stimulating static recovery and recrystallization. These synergistic effects improve the hardness, elastic modulus, strength, and ductility properties. The average hardness and elastic modulus of the bulk alloys are as high as 377.6 HV and 94.8 GPa, respectively; the best ultimate tensile strength and elongation to failure are 626.7 MPa and 22.1 %, respectively. Synchrotron X-ray diffraction validates the complex precipitates formed and confirms that there is no phase change during tension. The study offers insights into the microstructure and mechanical properties of cold spray additive manufactured HEAs and the effects of mixed powders and post-heat treatment on tuning microstructure and properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
3. Recent progress in high-entropy alloys10.3166/acsm.31.633-648 ↗
4. Ultrahigh-strength and ductile CoCrFeNi-based high-entropy alloys manufactured by laser powder bed fusion with multiple strengthening mechanisms10.1016/j.jmrt.2023.06.110 ↗
5. Twenty years of the CoCrFeNiMn high-entropy alloy: achieving exceptional mechanical properties through microstructure engineering10.1016/j.jmrt.2023.01.181 ↗
6. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
7. Extraordinary creep resistance in a non-equiatomic high-entropy alloy from the optimum solid-solution strengthening and stress-assisted precipitation process10.1016/j.actamat.2022.118600 ↗
8. Stress-controlled fatigue of HfNbTaTiZr high-entropy alloy and associated deformation and fracture mechanisms10.1016/j.jmst.2021.10.026 ↗
9. Microstructural evolution and mechanical properties of non-Cantor AlCuSiZnFe lightweight high entropy alloy processed by advanced powder metallurgy10.1016/j.msea.2020.140066 ↗
10. Lightweight AlCuFeMnMgTi high entropy alloy with high strength-to-density ratio processed by powder metallurgy10.1007/s12540-020-00823-5 ↗
11. Effect of additive elements (x= Cr, Mn, Zn, Sn) on the phase evolution and thermodynamic complexity of AlCuSiFe-x high entropy alloys fabricated via powder metallurgy10.1007/s12540-021-01125-0 ↗
12. High-entropy alloys: emerging materials for advanced functional applications10.1039/D0TA09601F ↗
13. High-entropy alloys for advanced nuclear applications10.3390/e23010098 ↗
14. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
15. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
16. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
17. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
18. Oxidative and abrasive wear of multiphase AlSi0. 75TiMnFeCux (X= 0, 0.25, 0.5) high entropy alloy under non-lubricating reciprocating motion10.1080/00325899.2023.2239615 ↗
19. Deformation induced FCC lamellae and their interaction in commercial pure Ti10.1016/j.scriptamat.2018.11.037 ↗
20. Deformational behavior of face-centered cubic (FCC) phase in high-pure titanium
21. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
22. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
23. Phase separation and mechanical behavior of AlCoCrFeNi-X (X= Cu, Mn, Ti) high entropy alloys processed via powder metallurgy10.1016/j.intermet.2021.107369 ↗
24. Microstructures and mechanical properties of multiprincipal component CoCrFeNiTix alloys10.1016/j.msea.2012.06.075 ↗
25. Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations10.1016/j.intermet.2021.107444 ↗
26. Effects of titanium addition on the microstructure and mechanical properties of quaternary CoCrFeNi high entropy alloy10.1016/j.msea.2022.143971 ↗
27. Effects of fabrication techniques on the mechanical properties of high entropy alloys: a review
28. Additive manufacturing of metallic glasses and high-entropy alloys: significance, unsettled issues, and future directions10.1016/j.jmst.2022.09.006 ↗
29. Simultaneously optimizing the strength and ductility of high-entropy alloys by magnetic field-assisted additive manufacturing10.1016/j.jallcom.2023.169688 ↗
30. Ductile and high strength Cu fabricated by solid-state cold spray additive manufacturing10.1016/j.jmst.2022.07.003 ↗
31. Solid-state additive manufacturing and repairing by cold spraying: a review10.1016/j.jmst.2017.09.015 ↗
32. Tuning the microstructure and mechanical properties of cold sprayed equiatomic CoCrFeMnNi high-entropy alloy coating layer10.1007/s12540-020-00886-4 ↗
33. Mechanical and microstructural properties of a CoCrFe0.75NiMo0.3Nb0.125 high-entropy alloy additively manufactured via cold-spray10.1016/j.jallcom.2021.162309 ↗
34. Cold spray additive manufacturing of CoCrFeNiMn high-entropy alloy: process development, microstructure, and mechanical properties10.1007/s11666-022-01374-4 ↗
35. A new approach to prepare fully dense Cu with high conductivities and anti-corrosion performance by cold spray10.1016/j.jallcom.2017.11.053 ↗
36. Understanding the cold spray deposition characteristics of mixed metal powders10.1557/adv.2019.418 ↗
37. Heat treatment of gas-atomized powders for cold spray deposition10.1007/s11661-017-4428-8 ↗
38. Deposition of fully dense Al-based coatings via in-situ micro-forging assisted cold spray for excellent corrosion protection of AZ31B magnesium alloy10.1016/j.jallcom.2019.07.279 ↗
39. The laser-assisted cold spray process and deposit characterisation10.1016/j.surfcoat.2009.02.135 ↗
40. Post-process treatments on supersonic cold sprayed coatings: a review10.3390/coatings10020123 ↗
41. Effect of laser remelting on microstructure and immersion corrosion of cold–sprayed aluminum coating on S355 structural steel10.1016/j.optlastec.2018.04.026 ↗
42. Using friction stir processing to augment corrosion resistance of cold sprayed AA2024/Al2O3 composite coatings10.1016/j.jallcom.2018.09.386 ↗
43. Thermo-mechanical post-treatment: a strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites10.1016/j.matdes.2018.06.062 ↗
44. Influence of hot isostatic pressing on structure and properties of titanium cold-spray deposits10.1007/s00170-018-03233-5 ↗
45. Effects of powder characteristics and mixing powders on cold sprayability and corrosion properties of tantalum coatings10.1016/j.surfcoat.2021.127763 ↗
46. Understanding particle-particle interactions from deposition efficiencies in cold spray of mixed Fe/316L powders with different particle size combinations10.1007/s11666-019-00976-9 ↗
47. Solid-state cold spraying of FeCoCrNiMn high-entropy alloy: an insight into microstructure evolution and oxidation behavior at 700-900 °C10.1016/j.jmst.2020.06.041 ↗
48. Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray10.1016/j.corsci.2018.04.018 ↗
49. Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying10.1016/j.matdes.2015.07.015 ↗
50. Al matrix composites fabricated by solid-state cold spray deposition: a critical review10.1016/j.jmst.2021.01.026 ↗
51. The effects of heat treatment on the mechanical properties of cold-sprayed coatings10.1016/j.surfcoat.2014.11.017 ↗
52. Optimization of cold spray additive manufactured AA2024/Al2O3 metal matrix composite with heat treatment10.1016/j.jmst.2021.07.036 ↗
53. Nanocrystalline equiatomic CoCrFeNi alloy thin films: are they single phase fcc?10.1016/j.surfcoat.2021.126945 ↗
54. Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties10.1007/s10853-020-05509-2 ↗
55. Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys10.1016/j.actamat.2018.09.040 ↗
56. The nucleation and growth of η phase in nickel-based superalloy during long-term thermal exposure10.1016/j.actamat.2019.12.038 ↗
57. Tuning the microstructure and mechanical properties of cold sprayed equiatomic CoCrFeMnNi high-entropy alloy coating layer10.1007/s12540-020-00886-4 ↗
58. Multi-scale elastic behavior of cold sprayed refractory metal from splat to bulk deposit by integrated experimental and modeling approach10.1016/j.msea.2022.143751 ↗
59. Temperature-dependent elastic modulus model for metallic bulk materials10.1016/j.mechmat.2019.103194 ↗
60. Microstructural and bulk properties evolution of cold-sprayed copper coatings after low temperature annealing10.1016/j.mtla.2019.100356 ↗
61. In situ SEM-EBSD analysis of plastic deformation mechanisms in neutron-irradiated austenitic steel10.1016/j.jnucmat.2019.01.034 ↗
62. Production of CoCrFeNi(Al/Ti) high-entropy alloys by mechanical alloying: optimization of milling time and comparison of corrosion susceptibilities
63. Microstructure and properties of CoCrFeNiTi high-entropy alloy coating fabricated by laser cladding10.1007/s11665-020-05204-y ↗
64. Fabrication of ODS austenitic steels and CoCrFeNi high-entropy alloys by spark plasma sintering for nuclear energy applications10.1007/s11837-019-03531-7 ↗
65. Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2018.02.251 ↗
66. Achieving superior tensile strength of CoCrFeNiTi0.3 high-entropy alloy via in-situ laser powder bed fusion of CoCrFeNi and Ti10.1016/j.msea.2023.145649 ↗
67. Effect of Ti on characterization and properties of CoCrFeNiTix high entropy alloy prepared via electro-deoxidization of the metal oxides and vacuum hot pressing sintering process10.3390/ma16041547 ↗
68. Prediction of strength and ductility in partially recrystallized CoCrFeNiTi0.2 high-entropy alloy10.3390/e21040389 ↗