Study of the effects of laser power and scanning speed on the microstructural morphologies and physical properties of L-PBF produced Ni52.39Ti47.61
Source abstract
Abstract
This study examined the effect of variations in the laser power and scan speed for 52.39 at.%Ni-47.61 at.%Ti samples produced via laser powder bed fusion (L-PBF). The laser power was varied between 150W and 180 W, the scanning speeds were varied between 500 mm/s and 1000 mm/s, and other process parameters were kept constant. The resulting microstructures and physical properties of the produced samples were evaluated. In particular, the phase type and phase transformation characteristics, composition, Vickers microhardness, and microstructural were examined. It was observed that variation in the mean microhardness and relative density were not significant at a constant scan speed of 1000 mm/s, regardless of the laser power value. Samples processed at a laser power of 180W (with all other parameters kept constant) exhibited a bimodal micro- and nano structures. It was found that the samples with bimodal microstructure had a higher lattice strain, extent of B2 phase, and higher phase transformation temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Zhang X · 2022
2. Assessing the biocompatibility of NiTi shape memory alloys used for medical applications10.1007/s00216-004-2888-3 ↗
3. Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition of element Ag10.1016/j.actbio.2011.02.010 ↗
4. Behaviour of human endothelial cells on surface modified NiTi alloy10.1016/j.biomaterials.2005.01.067 ↗
5. Biocompatibility and mechanical stability of Nitinol as biomaterial for intra-articular prosthetic devices10.1016/j.mtla.2019.100567 ↗
6. Selective laser melting of NiTi stents with open-cell and variable diameter10.1088/1361-665X/ac1908 ↗
7. Surface conditions of nitinol wires, tubing, and as‐cast alloys. The effect of chemical etching, aging in boiling water, and heat treatment10.1002/jbm.b.10001 ↗
8. Fabrication of NiTi through additive manufacturing: a review10.1016/j.pmatsci.2016.08.001 ↗
9. A short review on the microstructure, transformation behavior and functional properties of NiTi shape memory alloys fabricated by selective laser melting10.3390/ma11091683 ↗
10. The influence of heat treatment on the thermomechanical response of Ni-rich NiTi alloys manufactured by selective laser melting10.1016/j.jallcom.2016.03.161 ↗
11. Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel10.1016/j.msea.2019.03.129 ↗
12. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel
13. Advances in selective laser melting of nitinol shape memory alloy Part Production10.3390/ma12050809 ↗
14. Correlating microstructure and superelasticity of directed energy deposition additive manufactured Ni-rich NiTi alloys10.1016/j.jallcom.2017.12.270 ↗
15. The metallurgy of Nitinol as it pertains to medical devices10.1016/B978-0-12-812456-7.00025-1 ↗
16. Some aspects of the properties of NiTi shape memory alloy10.1016/S0925-8388(96)02572-8 ↗
17. Elahinia · 2016
18. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
19. Walker · An Investigation of Effective Process Parameters on Phase Transformation Temperature of Nitinol Manufactured By Work Piece Quality and Inhibit the Precise Machining · 2014 · 1–5
20. Materials Science & Engineering A Phase transformation characteristics and mechanical characterization of nitinol synthesized by laser direct deposition10.1016/j.msea.2012.09.031 ↗
21. Intermetallics Effects of printing volumetric energy densities and post-processing treatments on the microstructural properties
22. On the transformation behavior of NiTi shape-memory alloy produced by SLM10.1007/s40830-016-0083-y ↗
23. Selective laser melting produced layer structured NiTi shape memory alloys with high damping properties and Elinvar effect10.1016/j.scriptamat.2017.11.047 ↗
24. Stress effects on nitinol phase transformations
25. Stress-induced martensitic phase transformation in thin sheets of
26. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
27. A pragmatic model for selective laser melting with evaporation10.1016/j.actamat.2009.08.027 ↗
28. Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel10.1016/j.optlastec.2012.07.002 ↗
29. Characteristics of mechanical properties and microstructure for 316L austenitic stainless steel10.1016/S1006-706X(11)60117-9 ↗
30. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2010.02.019 ↗
31. On the effect of alloy composition on martensite start temperatures and latent heats in Ni–Ti-based shape memory alloys10.1016/j.actamat.2015.02.029 ↗
32. Leaf-like dislocation substructures and the decrease of martensitic start temperatures: a new explanation for functional fatigue during thermally induced martensitic transformations in coarse-grained Ni-rich Ti–Ni shape memory alloys10.1016/j.actamat.2011.12.014 ↗
33. On the multiplication of dislocations during martensitic transformations in NiTi shape memory alloys10.1016/j.actamat.2009.11.028 ↗
34. Influence of carbon on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2006.10.006 ↗
35. Whang SH. [No Title n.d].
36. A review study on thermal stability of powder-based additively manufactured alloys10.1016/j.jallcom.2023.171384 ↗
37. Weaver JS. NIST advanced manufacturing series 100-44 understanding anisotropic tensile properties of laser powder bed fusion additive metals : a detailed review of select examples NIST advanced manufacturing series 100-44 understanding anisotropic tensile properties n.d.
38. Yu · 2022 · 844
39. Li · Acta Materialia Microstructural Origin of The Anisotropic Flow Stress of Laser Powder B E D Fuse D AlSi10Mg · 2021 · 220
40. Kunz · Materials Science & Engineering A Microstructure Analysis of Novel Lpbf-Processed Duplex Stainless Steels Correlated to Their Mechanical and Corrosion Properties · 2021 · 801
41. Micro selective laser melting of NiTi shape memory alloy : defects , microstructures and thermal/mechanical properties10.1016/j.optlastec.2020.106374 ↗
42. Nigito · Microstructure of Niti Superelastic Alloy Manufactured by Selective Laser Melting · 2022 · 324 · 7
43. Multi-scale shape memory e ff ect recovery in NiTi alloys additive manufactured by selective laser melting and laser directed energy deposition10.1016/j.jmatprotec.2017.06.027 ↗
44. Bi-Directional scan pattern effects on residual stresses and distortion in as-built nitinol parts: a trend analysis simulation study10.1007/s40192-023-00292-9 ↗
45. 2017
46. 2017
47. 2017
48. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting10.1007/s11665-014-1226-y ↗
49. Resultant physical properties of as-built nitinol processed at specific volumetric energy densities and correlation with in-situ melt pool temperatures10.1016/j.jmrt.2022.10.073 ↗
50. Residual stress via the contour method in compact tension specimens produced via selective laser melting10.1016/j.scriptamat.2014.05.016 ↗
51. Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum10.1016/j.actamat.2013.04.036 ↗
52. Heat treatment for metal additive manufacturing10.1016/j.pmatsci.2022.101051 ↗
53. On the capability of grain refinement during selective laser melting of AlSi10Mg alloy10.1016/j.jmrt.2023.05.122 ↗
54. A review: melt pool analysis for selective laser melting with continuous wave and pulse width modulated lasers10.5757/ASCT.2018.27.6.113 ↗
55. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment
56. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
57. Characterization of mechanical and microstructural properties of constrained groove pressed nitinol shape memory alloy for biomedical applications10.1016/j.msec.2019.04.070 ↗
58. Microstructure and phase transformation of nickel-titanium shape memory alloy fabricated by directed energy deposition with in-situ heat treatment10.1016/j.jallcom.2021.162896 ↗
59. Kruth · 2016
60. Balling processes during selective laser treatment of powders10.1108/13552540410526953 ↗
61. Residual stresses in selective laser sintering and selective laser melting10.1108/13552540610707013 ↗
62. Powder bed fusion processes: an overview
63. Particle scale modelling of porosity formation during selective laser melting process using a coupled DEM - CFD approach10.1088/1757-899X/529/1/012001 ↗
64. Effect of laser scanning speed on the microstructure, phase transformation and mechanical property of NiTi alloys fabricated by LPBF10.1016/j.matdes.2022.110460 ↗
65. Grain structure engineering of NiTi shape memory alloys by intensive plastic deformation10.1021/acsami.2c05939 ↗
66. The role of bimodal grain size distribution in nanocrystalline shape memory alloys10.1088/1361-665X/aada30 ↗
67. Laser beam powder bed fusion of nitinol shape memory alloy (SMA)10.1016/j.jmrt.2021.07.126 ↗
68. The melting behavior of organic materials confined in porous solids10.1063/1.459240 ↗
69. A comparative study of inconel 718 formed by high deposition rate laser metal deposition with GA powder and PREP powder10.1016/j.matdes.2016.06.037 ↗
70. Kou · 2002
71. Microstructure of selective laser melted nickel-titanium10.1016/j.matchar.2014.05.017 ↗
72. The Lifshitz--Slyozov equation with encounters10.1142/S0218202501001070 ↗
73. Subsurface cooling rates and microstructural response during laser based metal additive manufacturing10.1038/s41598-020-58598-z ↗
74. Huo · 2010
75. Microstructural control of additively manufactured metallic materials10.1146/annurev-matsci-070115-031816 ↗
76. Solidification microstructure ‐ processing maps : solidification microstructure- processing maps
77. Crystallography open Database (COD)
78. Gražulis · 2023
79. X-ray Determination of compressive residual stresses in spring steel generated by high-speed water quenching10.3390/ma12071154 ↗
80. Review on volumetric energy density: influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion
81. Lattice strain and defects analysis in nanostructured semiconductor materials and devices by high-resolution X-ray diffraction: theoretical and practical aspects
82. X-ray analysis of ZnO nanoparticles by Williamson–Hall and size–strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
83. Correlation between the minimum grain size obtainable by ball milling and lattice strain10.1016/j.msea.2019.02.049 ↗
84. Evolution of thermal and mechanical properties of Nitinol wire as a function of ageing treatment conditions10.1016/j.jallcom.2019.153024 ↗
85. The influence of the R-phase on the superelastic behavior of NiTi10.1007/s40830-015-0013-4 ↗
86. An investigation of the synthesis of Ti-50 At. pct Ni alloys through combustion synthesis and conventional powder sintering10.1007/s11661-006-0242-4 ↗
87. Heat treatment of Ni-Ti alloy for improvement of shape memory effect10.1080/10426919708935124 ↗
88. Tips and tricks for characterizing shape memory alloy wire: Part 1-differential scanning calorimetry and basic phenomena10.1111/j.1747-1567.2008.00410.x ↗
89. In situ synthesis and characterization of shape memory alloy nitinol by laser direct deposition10.1007/s11661-011-0890-x ↗