A novel design of mono and bi-cells based hybrid auxetic structures and assessment of their compressive properties
Source abstract
Abstract
Auxetic structures have evolved beyond conventional cellular structures by offering unique attributes, including lightweight design, auxeticity, and exceptional mechanical properties. These structures have attracted significant attention in the modern era, prompting the exploration of innovative structural designs and the hybridization of existing unit cells. These efforts involve designing modified and hybridized auxetic unit cells to achieve superior mechanical performance and auxetic characteristics. The Fused Deposition Modeling (FDM) fabricated auxetic structures are inherently anisotropic. To accurately model their mechanical behavior and reliably assess their performance through numerical modeling, anisotropy must be considered. This study addresses the design and development of various novel, modified, and hybridized auxetic structures, examining their mechanical behaviors through numerical and experimental methods. The necessary material constants are determined for numerical modeling following standard printing and testing practices. The analysis reveals that the novel structures exhibit excellent auxetic and mechanical properties. The anisotropic material model results are highly correlated with the experimental results, demonstrating high accuracy ranging between 0.3 % and 4.2 %. In contrast, the isotropic model deviates significantly from the experimental findings. This study has advanced the field significantly, resulting in observed improvements in mechanical properties ranging from 200 % to 800 %, but it has also established a procedural guideline for precise numerical modeling of auxetic structures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Auxetic materials: the positive side of being negative10.1049/esej:20000402 ↗
2. Review of mechanics and applications of auxetic structures10.1155/2014/753496 ↗
3. The strain dependent indentation resilience of auxetic microporous polyethylene10.1023/A:1004830103411 ↗
4. Fracture toughness of re-entrant foam materials with a negative Poisson's ratio: experiment and analysis10.1007/BF00036481 ↗
5. 7 - auxetic composites in aerospace engineering
6. Design of energy-dissipating structure with functionally graded auxetic cellular material10.1080/13588265.2017.1328764 ↗
7. Auxetic materials for sports applications10.1016/j.proeng.2014.06.079 ↗
8. Organ printing: computer-aided jet-based 3D tissue engineering10.1016/S0167-7799(03)00033-7 ↗
9. Foam structures with a negative Poisson's ratio10.1126/science.235.4792.1038 ↗
10. Mechanical responses of 3D cross-chiral auxetic materials under uniaxial compression10.1016/j.matdes.2019.108226 ↗
11. Auxetic behaviour from rotating rigid units10.1002/pssb.200460376 ↗
12. Three-dimensional metamaterials with a negative Poisson's ratio and a non-positive coefficient of thermal expansion10.1016/j.ijmecsci.2017.10.042 ↗
13. Transition of deformation modes from bending to auxetic compression in origami-based metamaterials for head protection from impact10.1038/s41598-023-39200-8 ↗
14. Kirigami auxetic structure for high efficiency power harvesting in self-powered and wireless structural health monitoring systems10.1088/1361-665X/abcaaf ↗
15. Impact resistance of uniform and functionally graded auxetic double arrowhead honeycombs10.1016/j.ijimpeng.2015.04.005 ↗
16. Energy absorption of bio-inspired multi-cell CFRP and aluminum square tubes10.1016/j.compositesb.2017.03.034 ↗
17. Crashworthiness of novel concentric auxetic reentrant honeycomb with negative Poisson's ratio biologically inspired by coconut palm10.1016/j.tws.2020.106911 ↗
18. Crashworthiness analysis and bionic design of multi-cell tubes under axial and oblique impact loads10.1016/j.tws.2019.106333 ↗
19. Dynamic crushing behaviors and enhanced energy absorption of bio-inspired hierarchical honeycombs with different topologies10.1016/j.dt.2021.11.013 ↗
20. A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo10.1016/j.tws.2015.12.023 ↗
21. Systematic design of 3D auxetic lattice materials with programmable Poisson's ratio for finite strains10.1016/j.jmps.2018.01.013 ↗
22. Designing hierarchical metamaterials by topology analysis with tailored Poisson's ratio and Young's modulus10.1016/j.compstruct.2019.01.076 ↗
23. Evolutionary topology optimization for mechanical metamaterials with auxetic property10.1016/j.ijmecsci.2020.105638 ↗
24. Three-dimensional topology optimization of auxetic metamaterial using isogeometric analysis and model order reduction10.1016/j.cma.2020.113306 ↗
25. Mechanical properties and energy absorption capability of AuxHex structure under in-plane compression: theoretical and experimental studies10.1016/j.ijmecsci.2019.05.044 ↗
26. A novel re-entrant auxetic honeycomb with enhanced in-plane impact resistance10.1016/j.compstruct.2018.10.024 ↗
27. Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement10.1016/j.matdes.2016.12.067 ↗
28. In-plane mechanical properties of a novel hybrid auxetic structure10.1088/1361-665X/ac68b5 ↗
29. Quasi-static crushing behavior of novel re-entrant circular auxetic honeycombs10.1016/j.compositesb.2020.108117 ↗
30. Study on mechanical properties of a hierarchical octet-truss structure10.1016/j.compstruct.2020.112640 ↗
31. Novel hybrid 3D-printed auxetic vascular stent based on re-entrant and meta-trichiral unit cells: finite element simulation with experimental verifications
32. Compression and shear behaviour of graded chiral auxetic structures10.1016/j.mechmat.2020.103524 ↗
33. Cook · 2007
34. Performance of 3D printed topologically optimized novel auxetic structures under compressive loading: experimental and FE analyses10.1016/j.jmrt.2021.07.149 ↗
35. In-plane energy absorption characteristics and mechanical properties of 3D printed novel hybrid cellular structures10.1016/j.jmrt.2022.08.064 ↗
36. Baker · 2017
37. A new method for assessing anisotropy in fused deposition modeled parts using computed tomography data10.1007/s00170-019-04081-7 ↗
38. Mechanical characterization of 3D-printed polymers
39. Isotropic and anisotropic elasticity and yielding of 3D printed material10.1016/j.compositesb.2016.06.009 ↗
40. Mechanical properties of re-entrant anti-chiral auxetic metamaterial under the in-plane compression10.1016/j.tws.2022.110465 ↗
41. Mechanics of auxetic materials
42. Gibson · 2010
43. Dependency of densification properties on cell topology of metal foams10.1016/S1359-6462(02)00593-6 ↗
44. Microstructural aspects and modeling of failure in naturally occurring porous composites10.1016/S0167-6636(02)00268-5 ↗
45. Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties10.1016/j.matdes.2018.01.034 ↗
46. Compressive mechanical properties of ex-situ auxetic composite-filled tubes10.1016/j.jmrt.2021.07.061 ↗