Simultaneous refinement of α-Al and modification of Si in Al–Si alloy achieved via the addition of Y and Zr
Source abstract
Abstract
Due to the Si/Zr-poisoning effect, conventional refiners often yield unsatisfactory results in refining α-Al grains for Al–Si alloys. In this work, the refinement of α-Al grains and the modification of eutectic Si are simultaneously achieved through the combined addition of Y and Zr to A356 alloy. The results indicate that the individual addition of Zr aids in refinement due to the formation of heterogeneous nuclei Al3Zr, while Y alone can refine α-Al grains and modify eutectic Si to a certain extent. When Y and Zr are added together, not only is the size of α-Al grains further refined to 22.1 μm, but the morphology of eutectic Si is also completely transformed into a fibrous structure. The interaction between Zr and Y decreases their solubility in the matrix, enhances heterogeneous nucleation, and induces the formation of a Al8FeMg3Si6YxZry phase enriched at grain boundaries, suppressing the growth of eutectic Si flakes. Compared to the use of Al–Ti–B refiners and Sr modifiers, the alloy with 0.25Zr and 0.3Y additions exhibits more significant grain refinement and Si modification. Furthermore, it facilitates the precipitation of fine Al3(Y, Zr) particles during the T6 heat treatment process, resulting in an optimal ultimate tensile strength (UST) of 289 MPa and an elongation of 9.75%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Deformation behavior of an A356 alloy containing small sub-grains with wide low-angle boundary10.1016/j.jallcom.2022.164550 ↗
2. Additive manufacturing of nano-oxide decorated AlSi10Mg composites: a comparative study on Gd2O3 and Er2O3 additions
3. Micro-mechanism of simultaneous improvement of strength and ductility of squeeze-cast Al–Cu alloy
4. A study on the interaction between a Sr modifier and an Al-5Ti-1B grain refiner in an Al-7Si-0.35Mg casting alloy10.1016/j.jallcom.2022.168598 ↗
5. Effects of Sr, Ce and P on the microstructure and mechanical properties of rapidly solidified Al7Si alloys10.1016/j.matchar.2018.04.018 ↗
6. In situ alloying of AlSi10Mg-5 wt% Ni through laser powder bed fusion and subsequent heat treatment
7. Insights into the dual effects of Ti on the grain refinement and mechanical properties of hypoeutectic Al–Si alloys10.1016/j.jmst.2023.12.014 ↗
8. The poisoning effect of Sc or Zr in grain refinement of Al-Si-Mg alloy with Al-Ti-B10.1016/j.matlet.2021.130428 ↗
9. Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system10.1016/j.actamat.2020.01.039 ↗
10. Understanding grain refining and anti Si-poisoning effect in Al-10Si/Al-5Nb-B system10.1016/j.jmst.2020.04.075 ↗
11. Understanding the poisoning mechanisms of Si and Zr atoms on L12 Al3Ti (111) surface: a first-principles investigation10.1016/j.vacuum.2023.111891 ↗
12. A study on the interaction between a Sr modifier and an Al-5Ti-1B grain refiner in an Al-7Si-0.35Mg casting alloy10.1016/j.jallcom.2022.168598 ↗
13. Optimizing strength and ductility of Al–7Si–0.4 Mg foundry alloy: role of Cu and Sc addition10.1016/j.jallcom.2019.151944 ↗
14. The synergic effects of Sc and Zr on the microstructure and mechanical properties of Al–Si–Mg alloy10.1016/j.matdes.2015.09.045 ↗
15. Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al-Si cast alloy10.1016/j.msea.2017.03.097 ↗
16. The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al-Si alloy under conditions of different cooling rates10.1016/j.jallcom.2019.07.107 ↗
17. The effects of Y on primary a-Al and precipitation of hypoeutectic Al-Si alloy10.1016/j.matlet.2020.127795 ↗
18. Microstructural evolution and mechanical property of Al-Zr and Al-Zr-Y alloys10.1016/j.msea.2014.08.017 ↗
19. Precipitation hardening of cast Zr-containing A356 aluminium alloy10.1016/j.matdes.2010.08.006 ↗
20. The structural stability, mechanical properties and stacking fault energy of Al3Zr precipitates in Al-Cu-Zr alloys: HRTEM observations and first-principles calculations10.1016/j.jallcom.2016.04.178 ↗
21. 3D imaging and quantification of porosity and intermetallic particles in strontium modified Al-Si alloys10.1016/j.jallcom.2017.08.146 ↗
22. Influences of Fe, Mn and Y additions on microstructure and mechanical properties of hypoeutectic Al–7%Si alloy10.1016/j.intermet.2020.106768 ↗
23. Modification of eutectic Si in hypoeutectic Al-Si alloy with novel Al-3Ti-4.35La master alloy10.1016/j.jallcom.2022.167350 ↗
24. Structure-mechanical property relationships of in-situ A356/Al3Zr composites10.1016/j.msea.2023.144673 ↗
25. Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al-Si cast alloy10.1016/j.msea.2017.03.097 ↗
26. Effect of trace La addition on the microstructures and mechanical properties of A356 (Al–7Si–0.35Mg) aluminum alloys10.1016/j.jallcom.2009.07.183 ↗
27. Er addition to Al-Si-Mg-based casting alloy: effects on microstructure, room and high temperature mechanical properties10.1016/j.jallcom.2017.03.076 ↗
28. Preparation of a novel Al–3B–5Sr master alloy and its modification and refinement performance on A356 alloy10.1016/j.jallcom.2014.06.205 ↗
29. Effects of Sr on the microstructure and mechanical properties of in situ TiB2 reinforced A356 composite10.1016/j.matdes.2014.07.040 ↗