journal article·2024-11Open access

Electroplasticity constitutive modeling of aluminum alloys based on dislocation density evolution

Yanli Song, Long Chen, Chuanchuan Hao, Lin Hua, Hainan Xu, Jue Lu, Zhongmei Wang, Jianguo Lin, Yanxiong Liu, Lechun Xie

Abstract

Electrical current can effectively improve the plasticity of metallic materials. The tensile deformation behavior of Al alloys under the pulsed electrical current assisted quasi-static unidirectional tension (EAT) has been investigated. Materials under the EAT exhibits periodic electro-softening and strain-hardening behaviors, i.e., a ratchet shape mechanical response. However, establishing a constitutive model to accurately predict the ratchet shape mechanical behavior, especially during the EAT interval, and accurately predicting the strain-hardening behavior of materials are critical issues that need to be solved urgently. In this study, based on the Taylor polycrystalline model, thermal activation theory and dislocation density evolution theory, a two-parameter dislocation density electroplasticity constitutive model with forward and reverse dislocation density evolution was developed to describe the periodic coupling effect of the electro-thermal-mechanical fields during EAT. The tensile deformation behaviors of AA 6061-T6 and AA 7075-T6 under the effect of a pulsed electrical current were quantitatively predicted using the proposed constitutive model. The results show that the correlation coefficient between the predicted and experimental results of the constitutive model can reach 0.84–0.99, implying that the proposed constitutive model can accurately predict the complex electroplasticity behavior of Al alloys during EAT.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Thermal deformation behavior and processing maps of 7075 aluminum alloy sheet based on isothermal uniaxial tensile tests10.1016/j.jallcom.2018.07.173 ↗
2. Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: experiments and modeling10.1016/j.ijplas.2020.102679 ↗
3. Mechanical properties, springback, and formability of W-temper and peak aged 7075 aluminum alloy sheets: experiments and modeling10.1016/j.ijmecsci.2019.105344 ↗
4. Constitutive modelling and its application to stress-relaxation age forming of AA6082 with elastic and plastic loadings10.1016/j.jmatprotec.2021.117168 ↗
5. Formability of AA 2219-O sheet under quasi-static, electromagnetic dynamic, and mechanical dynamic tensile loadings10.1016/j.jmst.2020.07.023 ↗
6. A review of electromagnetic processing of materials (EPM): heating, sintering, joining and forming10.1016/j.jmst.2020.06.049 ↗
7. Deformation behavior and formability of solid solution state Al–Li alloy in electromagnetic forming10.1016/j.msea.2022.143858 ↗
8. Harnessing dislocation motion using an electric field10.1038/s41563-023-01572-7 ↗
9. An electric-pulse-assisted stamping process towards springback suppression and precision fabrication of micro channels10.1016/j.ijmecsci.2022.107081 ↗
10. Microstructure evolution and mechanical properties of Ti46. 5Al2Cr1. 8Nb-(W, B) alloys fabricated by spark plasma sintering and pulse current assisted isothermal forging10.1016/j.msea.2019.01.062 ↗
11. Achieving outstanding combination of strength and ductility of the Al-Mg-Li alloy by cold rolling combined with electropulsing assisted treatment10.1016/j.matdes.2019.108279 ↗
12. The effect of additional plastification of irradiated metal with current pickup10.1007/BF01522457 ↗
13. Electroplasticity drawing of stainless steels
14. Application of high‐density current in plastic working of metals10.1002/pssa.2210520109 ↗
15. Overview no. 49: on the mechanisms for the electroplastic effect in metals10.1016/0001-6160(86)90001-5 ↗
16. Manufacturing aspects relating to the effects of direct current on the tensile properties of metals10.1115/1.2712470 ↗
17. Metallic forging using electrical flow as an alternative to warm/hot working10.1115/1.2386164 ↗
18. Enhanced formability of 5754 aluminum sheet metal using electric pulsing
19. Formability of Al 5xxx sheet metals using pulsed current for various heat treatments10.1115/1.4002185 ↗
20. Dislocation reconfiguration during creep deformation of an Al-Cu-Li alloy via electropulsing10.1016/j.jmst.2022.05.008 ↗
21. Constitutive analysis of electrically-assisted tensile deformation of CP-Ti based on non-uniform thermal expansion, plastic softening and dynamic strain aging10.1016/j.ijplas.2017.02.012 ↗
22. Modified Johnson-Cook model incorporated with electroplasticity for uniaxial tension under a pulsed electric current. Metal10.1007/s12540-017-7297-1 ↗
23. Elucidating the origin of electroplasticity in metallic materials10.4028/b-L4ep0O ↗
24. Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy10.1016/j.corsci.2020.109219 ↗
25. Ultrafast regulation of nano-scale matrix defects using electrical property discrepancies to delay material embrittlement10.1016/j.jmst.2021.11.070 ↗
26. Defect reconfiguration in a Ti–Al alloy via electroplasticity10.1038/s41563-020-00817-z ↗
27. Novel strategy of electroshock treatment for improving mechanical performances of Al–Zn–Mg–Cu alloy by edge dislocation increment10.1016/j.msea.2022.143805 ↗
28. Effects of strain rate, temperature and interstitial content on the electroplastic effect in titanium10.1016/0036-9748(79)90072-3 ↗
29. Effects of electric current pulses on mechanical properties and microstructures of as-quenched medium carbon steel10.1016/j.msea.2016.03.031 ↗
30. Suppression of serrated flow in medium Mn steel under pulsed electric current10.1016/j.msea.2022.143271 ↗
31. In situ transmission electron microscopy investigation of electroplasticity in single crystal nickel10.1016/j.actamat.2021.117461 ↗
32. Theoretical basis for electro-and magnetoplasticity10.1016/S0921-5093(00)00782-6 ↗
33. Microstructure dependent electroplastic effect in AA 6063 alloy and its nanocomposites10.1016/j.jmrt.2021.03.112 ↗
34. Revealing the pulse-induced electroplasticity by decoupling electron wind force10.1038/s41467-022-34333-2 ↗
35. Prediction of the shear strength of aluminum with θ phase inclusions based on precipitate statistics, dislocation and molecular dynamics10.1016/j.ijplas.2020.102672 ↗
36. Multiscale modelling of precipitation hardening in Al–Cu alloys: dislocation dynamics simulations and experimental validation10.1016/j.actamat.2020.02.019 ↗
37. The mechanical behavior of 5052-H32 aluminum alloys under a pulsed electric current10.1016/j.ijplas.2014.02.002 ↗
38. Modeling of thermal and mechanical behavior of a magnesium alloy AZ31 during electrically-assisted micro-tension10.1016/j.ijplas.2016.07.008 ↗
39. Electric current–assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension10.1016/j.ijplas.2016.09.010 ↗
40. Multiscale modeling of coupling mechanisms in electrically assisted deformation of ultrathin sheets: an example on a nickel-based superalloy10.1016/j.ijmachtools.2021.103689 ↗
41. Pulsed current assisted forming of ultrathin superalloy sheet: experimentation and modelling10.1016/j.msea.2019.138412 ↗
42. Electro-thermal-mechanical coupled crystal plasticity modeling of Ni-based superalloy during electrically assisted deformation10.1016/j.ijplas.2022.103397 ↗
43. Work-hardening model for polycrystalline metals under strain reversal at large strains10.1016/j.actamat.2007.01.003 ↗
44. Electroplastic behaviour in an aluminium alloy and dislocation density based modelling10.1016/j.matdes.2017.03.072 ↗
45. Dislocation density based modelling of electrically assisted deformation process by finite element approach10.1016/j.ijmecsci.2022.107433 ↗
46. Fatigue life improvement of TC11 titanium alloy by novel electroshock treatment10.1016/j.matdes.2022.110902 ↗
47. Mechanical properties improvement of pre-deformed Al–Zn–Mg–Cu alloys by electroshocking treatment based on the non-equilibrium scattering of electron-dislocation10.1016/j.jallcom.2020.157987 ↗
48. Crystal plasticity modeling of electropulsing induced plasticity in metals
49. The effect of electric current on dislocation activity in pure aluminum: a 3D discrete dislocation dynamics study10.1016/j.ijplas.2023.103826 ↗
50. State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions10.1016/j.ijplas.2018.01.001 ↗
51. An energy based modeling for the acoustic softening effect on the Hall-Petch behavior of pure titanium in ultrasonic vibration assisted micro-tension10.1016/j.ijplas.2020.102879 ↗
52. Analytic model of dislocation density evolution in fcc polycrystals accounting for dislocation generation, storage, and dynamic recovery mechanisms10.1016/j.ijplas.2021.103178 ↗
53. Plastic strain in metals
54. Effect of cold work and non-isothermal annealing on the recrystallization behavior and texture evolution of a precipitation-hardenable aluminum alloy10.1016/j.scriptamat.2010.08.014 ↗
55. Plastic deformation mechanism of pure copper at low homologous temperatures10.1016/j.msea.2005.01.052 ↗
56. Kocks · 1987 · 1
57. Acoustic softening and residual hardening in aluminum: modeling and experiments10.1016/j.ijplas.2012.06.003 ↗
58. Krausz · 1996
59. Dislocation-density-related constitutive modeling10.1016/B978-012425970-6/50003-5 ↗
60. Dislocation structure evolution under electroplastic effect10.1016/j.msea.2019.138026 ↗
61. Dislocation density based modelling of electrically assisted deformation process by finite element approach10.1016/j.ijmecsci.2022.107433 ↗
62. Influence of grain size and grain boundaries on the thermal and mechanical behavior of 70/30 brass under electrically-assisted deformation10.1016/j.msea.2013.02.066 ↗
63. Electroplasticity in metals and ceramics10.1016/S0921-5093(00)00786-3 ↗
64. Electric current-induced annealing during uniaxial tension of aluminum alloy10.1016/j.scriptamat.2013.11.019 ↗
65. Achieving strength-ductility synergy in metallic glasses via electric current-enhanced structural fluctuations
66. Electroplastic deformation of metals10.1007/BF01523224 ↗
67. Frost · 1982
68. Fran · 1998