Investigation of process parameter influence on the mechanical properties of FDM-printed PEEK-carbon fiber composites using RSM and Taguchi methods
Source abstract
Abstract
The mechanical performance of FDM-printed high-performance polymers like carbon fibre-reinforced PEEK remains sensitive to process parameters, limiting their reliability in structural applications. The present study addresses this challenge by investigating the influence of printing speed, layer thickness, and infill density on tensile, flexural, and compressive strengths . Using Response Surface Methodology (RSM) and Taguchi analysis, predictive models were developed and statistically validated through ANOVA. The models were highly reliable, with R 2 values above 0.94 across all strength modes. Print speed and infill density had the greatest impact on tensile, flexural and compression strength, while layer thickness also played a significant role. Lower printing speeds and higher infill densities resulted in strength materials with better interlayer adhesion and fewer internal defects. The models can improve the mechanical performance of FDM printed parts by optimising process parameters across multiple objectives. This research has significant implications for aerospace, biomedical, and structural applications that require reliable and strong components.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments10.3390/polym12071529 ↗
2. Optimisation of strength properties of FDM printed parts—a critical review10.3390/polym13101587 ↗
3. Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials10.1016/j.ijfatigue.2020.106007 ↗
4. Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing10.1016/j.compositesb.2020.108175 ↗
5. Exploring the dynamic mechanical properties of fused filament fabrication printed polyetheretherketone with various infill patterns
6. Experimental investigations for optimizing the extrusion parameters on FDM PLA printed parts10.1007/s11665-018-3784-x ↗
7. Parametric optimization of FDM using the ANN-based whale optimization algorithm
8. Optimization of FDM printing parameters for square lattice structures: improving mechanical characteristics10.1016/j.matpr.2024.04.033 ↗
9. Mechanical investigation and optimization of parameter selection for Nylon material processed by FDM
10. Investigating the influence of strain rate on tensile, flexural, and ILSS of fused deposition modeling printed PLA polymer
11. Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation10.1108/RPJ-07-2021-0166 ↗
12. Mathematical modeling and FDM process parameters optimization using response surface methodology based on Q-optimal design10.1016/j.apm.2016.06.055 ↗
13. Exploring the synergistic influence of FDM parameters and strain rate on tensile strength and failure mechanism of FDM printed PLA10.1007/s40964-024-00782-y ↗
14. What controls layer thickness effects on the mechanical properties of additive manufactured polymers10.1016/j.surfcoat.2023.130131 ↗
15. Fused deposition modelling (fdm) process parameter prediction and optimization using group method for data handling (gmdh) and differential evolution (de)10.1007/s00170-014-5835-2 ↗
16. Mechanical property of FDM printed ABS: influence of printing parameters10.1007/s00170-019-03313-0 ↗
17. Mechanical behavior of polymer-based composites using fused filament fabrication under monotonic and fatigue loadings
18. Toward polymeric and polymer composites impeller fabrication10.3390/polym14010097 ↗
19. Thermal, tensile and fatigue behaviors of the PA6, short carbon fiber-reinforced PA6, and continuous glass fiber-reinforced PA6 materials in fused filament fabrication (FFF)10.3390/polym15030507 ↗
20. Multi-objective optimization and prediction of surface roughness and printing time in FFF printed ABS polymer10.1038/s41598-022-20782-8 ↗
21. Fused deposition modeling based polymeric materials and their performance: a review10.1002/pc.26275 ↗
22. Review on multi-objective optimization of FDM process parameters for composite materials10.1007/s12008-022-01111-9 ↗
23. Optimization of fused deposition modeling process parameters: a review of current research and future prospects10.1007/s40436-014-0097-7 ↗