journal article·2024-03Open access

Effect of Cr on wear resistance and mechanism of preset-powder laser cladding T15 alloy steel coating

Fanmin Shang, Zhen Xu, Jianzhi Chen, Liangyu Chen, Sheng Lu, Shanlin Wang, Xuwen Jing, Oleksandr Dubovyi

Abstract

Remanufacturing worn parts by the laser cladding process has wide prospect. To repair the worn camshafts, the T15 alloy steel coatings with different content of Cr were fabricated by the preset-powder laser cladding (PPLC). The effect of Cr content (3, 6, 9 and 12 wt%) on the microstructure and the wear resistance of T15 alloy steel coatings was investigated from the aspects of solution element, grain size and phase composition. The results indicate that the microstructure of the coatings is composed of martensite, retained austenite (RA) and eutectic boron-carbides. The content of martensite increases first and then decreases, the content of RA decreases and the content of eutectic boron-carbides increases with the increment of Cr content. The wear resistance increased first and then decreased with the increment of Cr content, the T15 alloy steel coating with the 9 wt% Cr has the hardness of 880 HV0.2, exhibiting the lowest wear rate (2.85 × 10−8 mm3/N·mm). A modified relationship between the wear rate and the Cr content is built by the nonlinear fitting method based on the classical Archard wear mode, the fitted results showed that the T15 alloy steel coating with 10.04 wt% Cr content has the highest wear resistance, which can provide a reference for the composition optimization of high speed steel with desired wear resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Crack formation of camshaft castings: hot tearing susceptibility and root causes10.1016/j.engfailanal.2023.107143 ↗
2. Fracture analysis of a camshaft made from nodular cast iron10.1016/j.engfailanal.2005.11.001 ↗
3. Study on tribological properties of boronized and textured composite surface and its application on camshaft connecting-rod type hydraulic motor
4. Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology10.1016/j.jmapro.2019.12.009 ↗
5. Microstructure and high temperature properties of laser cladded WTaNbMo refractory high entropy alloy coating assisted with ultrasound vibration10.1016/j.jallcom.2022.165888 ↗
6. Investigation on synergism between additive and subtractive manufacturing for curved thin-walled structure10.1080/17452759.2022.2029009 ↗
7. The dynamic recrystallization mechanism of ultrasonic power on non-contact ultrasonic-assisted direct laser deposited alloy steel10.1016/j.msea.2022.142971 ↗
8. Additive manufacturing of metallic lattice structures: unconstrained design, accurate fabrication, fascinated performances, and challenges
9. Effects of ultrasound on multilayer forming mechanism of Inconel 718 in directed energy deposition
10. Microstructure and mechanical properties of parts formed by ultrasonic vibration-assisted laser cladding of Inconel 71810.1016/j.surfcoat.2021.126964 ↗
11. Microstructure, hardness and wear resistance of AlCoCrFeNiTax (x=0, 0.1, 0.3) high-entropy alloys enhanced by laser remelting and Ta addition10.1016/j.jallcom.2023.169741 ↗
12. The effect of Si and B on formability and wear resistance of preset-powder laser cladding W10V5Co4 alloy steel coating10.1016/j.optlastec.2020.106590 ↗
13. Effect of Ti and TiC additions on the microstructure and wear resistance of high chromium white irons produced by laser directed energy deposition
14. Study of the microstructure and mechanical properties of Cu–Sn alloys formed by selective laser melting with different Sn contents10.1016/j.jmrt.2023.04.198 ↗
15. Effect of Cr atom doping on the carbide stability and mechanical properties of high carbon chromium bearing steels10.1016/j.jmrt.2023.02.190 ↗
16. The alloying effects of Cr on in-situ phase evolution and wear resistance of nickel composite coatings fabricated by wide-band laser deposition
17. Effect of chromium on microstructure and wear resistance of Fe-Cr-C hardfacing alloys10.4028/www.scientific.net/MSF.1001.41 ↗
18. The comparative study of W/Cr addition in Fe-base by laser surface alloying on fatigue wear resistance of GCI10.1016/j.surfcoat.2015.12.009 ↗
19. Alloy design for microstructural-tailored boron-modified ferritic stainless steel to ensure corrosion and wear resistance10.1016/j.jmrt.2023.03.023 ↗
20. Hashimoto · Fatigue life studies in carbon dual-phase steels · 1996 · 18 · 529
21. 2014
22. Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization10.1016/j.matdes.2016.01.028 ↗
23. Effects of quenching temperature on bainite transformation, retained austenite and mechanical properties of hot-galvanized Q&P steel10.1016/j.msea.2021.141643 ↗
24. Study on the role of chromium addition on sliding wear and corrosion resistance of high-manganese steel coating fabricated by wire arc additive manufacturing
25. Grain refinement and strengthening of 316L stainless steel through addition of TiC nanoparticles and selective laser melting10.1016/j.msea.2021.142460 ↗
26. Effect of Cr-rich carbide precipitates on austenite stability and consequent corrosion behavior of ultrafine-grained 304 stainless steel produced by cryogenic rolling and annealing treatment10.1016/j.matchar.2022.112553 ↗
27. Role of retained austenite with different morphologies on sub-surface fatigue crack initiation in advanced bainitic steels10.1016/j.scriptamat.2020.03.036 ↗
28. Effect of chromium concentration on microstructure and properties of Fe–3.5B alloy10.1016/j.msea.2010.07.066 ↗
29. First principles study the stability, mechanical and electronic properties of manganese carbides10.1016/j.commatsci.2014.01.054 ↗
30. Effect of chromium content on microstructure, hardness, and wear resistance of as-cast Fe-Cr-B alloy10.1007/s11665-019-04369-5 ↗
31. NiCrSiBC coatings: effect of dilution on microstructure and high temperature tribological behavior10.1016/j.wear.2016.01.015 ↗
32. Morphology tailoring of metal pool and eutectic carbides in magnetic-controlled electroslag remelted M2 high-speed steel10.1016/j.jmrt.2021.12.070 ↗
33. Effect of slippage rate on frictional wear behaviors of high-speed steel with dual-scale tungsten carbides (M6C) under high-pressure sliding-rolling condition10.1016/j.triboint.2020.106719 ↗
34. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
35. 2013
36. Formation of eutectic borocarbides in high boron high speed steel during non‐equilibrium crystallization10.1002/srin.201800284 ↗