Microstructure evolution, stress state and electromagnetic performance of Fe-based nanocrystalline alloy induced by stress-annealing
Source abstract
Abstract
Stress-induced anisotropy has been applied for FeSiBCuNb nanocrystalline alloy ribbons in transformers with large direct current (DC) component. However, the physical mechanism of anisotropy induced by stress annealing during crystallization remains controversial. Here, a systematic study was conducted on the microstructure, residual stress state, dynamic domain structure and properties of the stress-annealed FeSiBCuNb nanocrystalline ribbons. Present results demonstrate that, the increase of the applied stress greatly increases the residual tensile stress and induces lattice distortion, which acts as pinning site during magnetization, resulting in enhanced domain-wall energy and narrower wall width. Meanwhile, stress annealing promotes the flattening of hysteresis loops and decreases the effective permeability, which improves the DC-bias characteristics of the ribbons, thereby promoting the transition from “hard saturation” to “soft saturation” behavior. Also, stress-induced grain refinement is beneficial to obtaining high hardness. Owing to the stress-induced anisotropy, the stress-annealed sample with applied stress of 113 MPa exhibits excellent combined properties, including low constant effective permeability of 438 at wide frequency range (1 kHz–8 MHz), high DC-bias capability of 74% (30 Oe), low power loss of 49 kW/m3 (100 mT, 100 kHz), and high hardness of 644 HV. This discovery provides an insightful understanding of stress-induced anisotropy mechanism on the high-performance Fe-based nanocrystalline alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and Mechanical Properties of Steels · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
2. Past, present, and future of soft magnetic composites10.1063/1.5027045 ↗
3. Amorphous–nanocrystalline alloys: fabrication, properties, and applications
4. High permeability and low core loss nanocrystalline soft magnetic composites based on FeSiBNbCu@Fe3O4 powders prepared by HNO3 oxidation10.1016/j.matchemphys.2021.124427 ↗
5. Soft magnetic materials for power inductors: state of art and future development
6. Property prediction and accelerated design for multicomponent soft magnetic alloy via first-principles calculation10.1016/j.jmmm.2024.171853 ↗
7. Effect of annealing on soft magnetic behavior of nanostructured (Fe0.5Co0.5)73.5Si13.5B9Nb3Cu1 ribbons10.1016/j.jallcom.2013.08.038 ↗
8. Microstructure evolution, magnetic properties and frequency characteristics of Si-rich FeSiBCuNb soft magnetic alloy induced by annealing treatment10.1016/j.matchar.2022.111830 ↗
9. Crystallization behavior of FeSiBPCu nanocrystalline soft-magnetic alloys with high Fe content10.1166/sam.2015.2664 ↗
10. Research progress and application prospect of Fe-based soft magnetic amorphous/nanocrystalline alloys
11. Development of FeSiBNbCu nanocrystalline soft magnetic alloys with high bs and good manufacturability10.1007/s11664-016-4643-x ↗
12. Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design10.1016/j.jallcom.2020.157850 ↗
13. Nanocrystallization, magnetic properties and bending ductility of antiferromagnetic Mn-doped FeSiBCuPC alloys induced by micro-compressive stress annealing10.1016/j.jallcom.2021.160746 ↗
14. Finemet nanocrystalline soft magnetic alloy: investigation of glass forming ability, crystallization mechanism, production techniques, magnetic softness and the effect of replacing the main constituents by other elements10.1016/j.jmmm.2016.02.057 ↗
15. Amorphous FeNiCoCuSiBCr alloys with superior direct current tolerant characteristics10.1016/S1006-706X(15)60022-X ↗
16. Characterization of nanosized NiZn ferrite powders synthesized by an autocombustion method10.1016/j.matchemphys.2005.12.012 ↗
17. Influence of stress-induced anisotropy on domain structure and magnetic properties of Fe-based nanocrystalline alloy under continuous tension annealing10.1016/j.jnoncrysol.2022.122035 ↗
18. Stress-induced magnetic and structural anisotropy of nanocrystalline Fe-based alloys10.1063/1.3506538 ↗
19. Tailoring the magnetization linearity of Finemet type nanocrystalline cores by stress induced anisotropies10.1016/j.jmmm.2019.166327 ↗
20. Magnetic properties, anisotropy, and domain structure of Fe-based nanocrystalline alloy induced by continuous stress-annealing treatment10.1016/j.jmmm.2023.170430 ↗
21. Effect of stress on crystallization behavior in a Fe-based amorphous ribbon: an in situ synchrotron radiation X-ray diffraction study10.1016/j.jmmm.2018.08.078 ↗
22. Mesostructural origin of stress-induced magnetic anisotropy in Fe-based nanocrystalline ribbons10.1063/1.3330931 ↗
23. Formation mechanism of stress-induced anisotropy in stress-annealed Fe-based nanocrystalline ribbon alloys10.1016/j.jallcom.2018.09.318 ↗
24. The microstructure evolution of a Fe73.5Si13.5B9Nb3Cu1 nanocrystalline soft magnetic material10.1016/0956-7151(92)90131-W ↗
25. Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: a review study10.1016/j.jnoncrysol.2014.03.010 ↗
26. Model predictions for the enthalpy of formation of transition metal alloys10.1016/0364-5916(83)90030-5 ↗
27. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
28. Laser-beam powder bed fusion followed by annealing with stress: a promising route for magnetostrictive improvement of polycrystalline Fe81Ga19 alloys
29. Strategy of refining the microstructure of Nd-Fe-Co-Ga-B ribbons by high-speed melt-spinning and annealing10.1016/j.matlet.2022.132878 ↗
30. Ferromagnetic element microalloying and clustering effects in high Bs Fe-based amorphous alloys10.1016/j.jmst.2017.04.016 ↗
31. Soft magnetic composite materials (SMCs)10.1016/j.jmatprotec.2007.02.034 ↗
32. Magnetization loss and domain refinement in nanocrystalline tape wound cores10.1016/j.actamat.2006.03.011 ↗
33. Stress level in Finemet materials studied by impedanciometry10.1063/1.1453948 ↗
34. Creep induced magnetic anisotropy in nanocrystalline Fe-Cu-Nb-Si-B alloys10.1109/20.334226 ↗
35. Strain- and field-induced magnetic anisotropy in metallic glasses with positive or negative lambdas10.1016/0038-1098(80)90497-4 ↗
36. Bond-orientational anisotropy in metallic glasses observed by x-ray diffraction10.1103/PhysRevB.35.2162 ↗
37. Direct evidence for structural origin of stress-induced magnetic anisotropy in Fe-Si-B-Nb-Cu nanocrystalline alloys10.1063/1.1615672 ↗
38. Origin of the magnetic anisotropy induced by stress annealing in Fe-based nanocrystalline alloy10.1063/1.1901807 ↗
39. Structural anisotropy of amorphous alloys with creep-induced magnetic anisotropy10.1016/j.actamat.2011.11.017 ↗