journal article·2024-09Open access

Porosity suppression mechanism analysis in narrow-gap oscillating laser-MIG hybrid welding of aluminum alloys based on keyhole stability and molten pool flow behavior

Chuang Cai, Yong He, Jia Xie, Jie Yu, Lidong Xu, Zilin Chen, Zhenxin Li, Enhua Wang, Hui Chen

Abstract

In this study, the keyhole dynamic behavior and molten pool flow were investigated to elucidate the effects of oscillating laser on porosity in narrow-gap oscillating laser-MIG hybrid welding of aluminum alloys. A weld with a porosity of 0.08% was produced at the laser oscillating frequency of 600 Hz and diameter of 1 mm, while 2.27% without oscillating laser. Compared to non-oscillating laser, keyhole opening size increased by about 2.3 times and keyhole depth fluctuation was suppressed. The forces acted on the interface between keyhole wall and molten pool became more balanced. The increased vapor recoil pressure overcame the combined closure effect of gravity and molten pool pressure. While applying oscillating laser, the vortex in molten pool was eliminated and the liquid metal flow was more stable. The combined impact force caused by droplets transfer and liquid metal convection due to constraining effect of narrow gap was buffered, which had less effect on molten pool and keyhole stability. The liquid metal tended to flow from the molten pool inside to surface, which favored the escape of bubbles from the molten pool.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Laser Material Processing Techniques · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Ye · 2020
2. Microstructure and mechanical properties of narrow gap laser-arc hybrid welded 40 mm thick mild steel10.3390/ma10020106 ↗
3. Formation and suppression mechanism of lack of fusion in narrow gap laser-arc hybrid welding10.1007/s00170-018-2851-7 ↗
4. Narrow gap welding of X80 steel using laser-CMT hybrid welding with Misaligned laser and arc10.3390/cryst12060832 ↗
5. Dynamics of solid-liquid interface and porosity formation determined through x-ray phase-contrast in laser welding of pure Al10.1016/j.jmatprotec.2017.06.033 ↗
6. Numerical study of keyhole instability and porosity formation mechanism in laser welding of aluminum alloy and steel10.1016/j.jmatprotec.2017.10.011 ↗
7. Problems and issues in laser-arc hybrid welding10.1179/174328009X411163 ↗
8. Guidelines in the experimental validation of a 3D heat and fluid flow model of keyhole laser welding10.1088/0022-3727/49/15/155503 ↗
9. Porosity formation mechanism and its prevention in laser lap welding for T-joints10.1016/j.jmatprotec.2014.03.011 ↗
10. Effect of microstructural characteristics on high cycle fatigue properties of laser-arc hybrid welded AA6082 aluminum alloy10.1016/j.jmatprotec.2016.01.019 ↗
11. Process and joint characterizations of laser-MIG hybrid welding of AZ31 magnesium alloy10.1016/j.jmatprotec.2012.01.011 ↗
12. Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization10.1016/j.ijheatmasstransfer.2019.05.111 ↗
13. Suppressing porosity of a laser keyhole welded Al-6Mg alloy via beam oscillation10.1016/j.jmatprotec.2019.116382 ↗
14. Effects of sidewall grain growth on pore formation in narrow gap oscillating laser welding10.1016/j.optlastec.2022.108483 ↗
15. A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: morphology, microstructure and mechanical properties10.1016/j.jmapro.2020.01.018 ↗
16. Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy10.1016/j.optlastec.2020.106540 ↗
17. The investigation of molten pool dynamic behaviors during the “∞” shaped oscillating laser welding of aluminum alloy10.1016/j.ijthermalsci.2021.107350 ↗
18. Numerical study of alloying element distribution in CO2 laser-GMA hybrid welding10.1016/j.commatsci.2010.06.025 ↗
19. Numerical simulation of thermal process and fluid flow field in laser-MIG hybrid weld pools
20. Numerical simulation of keyhole behaviors and fluid dynamics in laser-gas metal arc hybrid welding of ferrite stainless steel plates10.1016/j.jmapro.2016.11.009 ↗
21. Gong · 2018
22. Modeling of transport phenomena in hybrid laser-MIG keyhole welding10.1016/j.ijheatmasstransfer.2008.02.011 ↗
23. Experimental and numerical analysis of molten pool and keyhole profile during high-power deep-penetration laser welding10.1016/j.ijheatmasstransfer.2018.05.031 ↗
24. First-order phase transitions induced by laser radiation in absorbing condensed matter Effect of Laser Radiation on Absorbing Condensed Matter
25. Experimental determination of temperature threshold for melt surface deformation during laser interaction on iron at atmospheric pressure10.1088/0022-3727/44/43/435402 ↗
26. Dynamic balance of heat and mass in high power density laser welding10.1364/OE.26.006392 ↗
27. A pathway to mitigate macrosegregation of laser-arc hybrid Al-Si welds through beam oscillation10.1016/j.ijheatmasstransfer.2020.119467 ↗
28. Marangoni effect in laser deep penetration welding of steel10.2351/1.1404412 ↗
29. Study of porosity suppression in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy10.1016/j.jmatprotec.2021.117053 ↗
30. Acheson · 1990