journal article·2024-01Open access

Synergistic improvement of mechanical, electrical and thermal properties by graphene nanoplatelets in polyaniline incorporated rubbery thermoplastic composites

Farrah Diyana Zailan, Ruey Shan Chen, Sahrim Haji Ahmad, Moayad Husein Flaifel, Dalila Shahdan, Wan Nazri Wan Busu, Lih Jiun Yu

Abstract

Here, thermoplastic natural rubber (TPNR) blend filled with polyaniline (PANi) and graphene nanoplatelets (GNPs) was fabricated via melt blending and compression moulding. The synergistic influence of including 1–5 wt% GNPs with 3 wt% PANi in nanocomposites on the mechanical via tensile test, Impedance electrical test, thermal stability via thermogravimetric analysis test and morphologic observation were examined. Inclusion of 2 wt% of GNPs increased by 62.8 % on tensile strength and 151.8 % on Young's modulus of TPNR/PANi. The highest electrical conductivity and thermal stability were achieved in the same nanocomposite composition. With a low loading of GNPs, an electrical conductivity of 2.6 E−9 S/cm was achieved which potential to be a new semi-conductive material. At this optimum content, the scanning electron microscopy micrograph revealed a homogenous distribution of GNPs in the TPNR/PANi blend as well as good matrix-filler interaction. To be practical in real application, cost-effectiveness is another important aspect to be determined. In this work, researchers evaluated the cost-performance of each system (TPNR, TPNR/PANi and TPNR/PANi/GNP) based on material costs, mechanical and electrical properties. Different general trends (positive, negative and synergistic) of cost-efficiency relationship were obtained for different material system and the priority greatly depends on their intended uses.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Mechanical, thermal, and conductivity performances of novel thermoplastic natural rubber/graphene nanoplates/polyaniline composites10.1002/app.48873 ↗
2. The influence of adopted chemical modification route on the thermal and mechanical properties of alumina nanoparticles-impregnated thermoplastic natural rubber nanocomposite10.1007/s13369-019-04279-7 ↗
3. Polymer-plastics Technology and engineering mechanical and morphological properties of PP/LLPDE/NR blends — effects of polyoctenamer10.1080/03602550500207741 ↗
4. The contribution of eco-friendly bio-based blends on enhancing the thermal stability and biodegradability of Poly(lactic acid)10.1016/j.jclepro.2018.07.119 ↗
5. Role of sonication time on thermal behaviour and dynamic mechanical analysis of NiZn ferrite incorporated PLA/LNR nanocomposite10.1007/s12034-019-1782-8 ↗
6. Magnetic and microwave absorbing properties of magnetitethermoplastic natural rubber nanocomposites10.1016/j.jmmm.2010.06.036 ↗
7. Enhanced mechanical and thermal properties of electrically conductive TPNR/GNP nanocomposites assisted with ultrasonication10.1371/journal.pone.0222662 ↗
8. Comparison of magnetic and microwave absorbing properties between multiwalled carbon nanotubes nanocomposite, nickel zinc ferrite nanocomposite and hybrid nanocomposite10.1260/1708-5284.11.4.317 ↗
9. Magnetic properties of irradiated nickel ferrite thermoplastic natural rubber nanocomposite10.4028/www.scientific.net/AMR.879.206 ↗
10. Thermal conductivity and dynamic mechanical analysis of NiZn ferrite nanoparticles filled thermoplastic natural rubber nanocomposite10.1016/j.compositesb.2013.04.021 ↗
11. Properties of (Low-density polyethylene)/(natural rubber)/(water hyacinth fiber) composites: the effect of polyaniline10.1002/vnl.21332 ↗
12. Properties of low-density polyethylene/natural rubber/water hyacinth fiber composites: the effect of alkaline treatment10.1007/s00289-015-1508-z ↗
13. Gamma irradiation influence on mechanical, thermal and conductivity properties of hybrid carbon nanotubes/montmorillonite nanocomposites
14. Hybridization of a thermoplastic natural rubber composite with multi-walled carbon nanotubes/silicon carbide nanoparticles and the effects on morphological, thermal, and mechanical properties
15. Comparison of toughening mechanisms in natural silk-reinforced composites with three epoxy resin matrices
16. A novel aluminum–graphite dual-ion battery10.1002/aenm.201502588 ↗
17. Electrical properties of conductive polymers: Pet - Nanocomposites' fibres10.1515/aut-2004-040102 ↗
18. Reinforced conductive polyester based on itaconic acids, glycerol and polypyrrole with potential for electroconductive tissue restoration
19. Polyaniline-based thermoplastic blends
20. Electrical conductivity and Antenna properties of polyaniline filled GNPs nanocomposites10.37934/mjcsm.4.1.1127 ↗
21. Physical characteristics of polyaniline-graphene nanoplatelets (PANI/GNPs) via oxidation polymerization of Aniline
22. Thermal, mechanical and electromagnetic properties of LLDPE/PANI composites10.1007/s00289-016-1862-5 ↗
23. Progress in preparation, processing and applications of polyaniline10.1016/j.progpolymsci.2009.04.003 ↗
24. PANI-LDPE composites: effect of blending conditions10.1002/pc.20523 ↗
25. Assessment of mechanical performance, thermal stability and water resistance of novel conductive poly(lactic acid)/modified natural rubber blends with low loading of polyaniline10.1002/pi.5613 ↗
26. Characterization of functionalized low density polyethylene/polyaniline nano fiber composite
27. Zilberman · 1997 · 243
28. Preparation and characterization of conductive HDPE/LLDPE/Polyaniline blends10.1063/1.4965554 ↗
29. On the prospects of conducting polyaniline/natural rubber composites for electromagnetic shielding effectiveness applications10.1177/0892705712454869 ↗
30. Effect of blend ratio on the morphology and electromagnetic properties of nanoparticles incorporated natural rubber blends10.1016/j.compositesb.2016.06.017 ↗
31. Materials Science & Engineering A Cooperative effect of strength and ductility processed by thermomechanical treatment for Cu – Al – Ni alloy
32. Effect of polymer blend matrix compatibility and fibre reinforcement content on thermal stability and flammability of ecocomposites made from waste materials10.1016/j.tca.2016.08.005 ↗
33. Ethylene/1-Hexene Copolymerization and Synthesis of LLDPE/nanocarbon composite through in Situ polymerization
34. Optimization and prediction of mechanical and thermal properties of graphene/LLDPE nanocomposites by using artificial neural networks10.1155/2016/5340252 ↗
35. Surface modification of polyethylene/graphene composite using corona discharge10.1088/1361-6463/aaa9d6 ↗
36. A feasible compatibilization processing technique for improving the mechanical and thermal performance of rubbery Biopolymer/graphene nanocomposites10.3390/polym14225009 ↗
37. Processing characteristics and physicomechanical properties of natural rubber and liquid natural rubber blends10.1002/app.10666 ↗
38. Tensile and morphology properties of PLA/LNR blends modified with maleic anhydride grafted-polylactic acid and-natural rubber10.1063/1.5027930 ↗
39. Thermal analysis of polylactic acid/liquid natural rubber reinforced with multi-walled carbon nanotubes10.4028/www.scientific.net/AMR.1133.481 ↗
40. Mechanical, thermal and morphological properties of poly(lactic acid)/epoxidized natural rubber blends10.1177/0095244312468442 ↗
41. Oxygen barrier properties of new thermoplastic natural rubber nanocomposites10.1080/03602559.2011.603787 ↗
42. Effect of conductive polyaniline in thermoplastic natural rubber blends on the mechanical, thermal stability, and electrical conductivity properties10.1002/app.47527 ↗
43. Zailan · Influence of Processing Conditions on Mechanical Behaviours of Thermoplastic Natural Rubber/Polyaniline Blend · 2017 · 3 · 227
44. Effect of processing parameters on tensile properties of thermoplastic natural rubber (TPNR) blend with polyaniline10.1063/1.4966815 ↗
45. Optimization of graphene nanoplatelets dispersion and nano-filler loading in bio-based polymer nanocomposites based on tensile and thermogravimetry analysis10.1016/j.jmrt.2021.08.130 ↗
46. Characterization of graphene-rubber nanocomposites : a review
47. Microstructural evolution in graphene nanoplatelets reinforced magnesium matrix composites fabricated through thixomolding process10.1016/j.jallcom.2023.168824 ↗
48. Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions10.1016/j.ceramint.2019.04.226 ↗
49. Tribological performance of different concentrations of Al2O3 nanofluids on minimum quantity lubrication Milling
50. Assessment of mechanical and electrical performances of polylactic acid/liquid natural rubber/graphene platelets nanocomposites in the light of different graphene platelets functionalization routes10.1002/macp.202100185 ↗
51. Microstructure and properties of graphene nanoplatelets reinforced AZ91D matrix composites prepared by electromagnetic stirring casting10.1016/j.jmrt.2022.11.033 ↗
52. An approach towards optimization appraisal of thermal conductivity of magnetic thermoplastic elastomeric nanocomposites using response surface methodology10.3390/polym12092030 ↗
53. The effect of wood extractives on the thermal stability of different wood-LLDPE composites10.1016/j.tca.2008.10.008 ↗
54. The potential of natural rubber (NR) in controlling morphology in two-matrix epoxy/NR/graphene nano-platelets (GNP) systems
55. Preparation, thermal, magnetic and microwave absorption properties of thermoplastic natural rubber matrix impregnated with NiZn ferrite nanoparticles10.1016/j.compscitech.2014.03.016 ↗
56. Chieng · 2014 · 93
57. The influence of Fe3O4@GNP hybrids on enhancing the EMI shielding effectiveness of epoxy composites in the X-band
58. Characterization of recycled thermoplastics-based nanocomposites : polymer-clay compatibility , blending procedure , processing condition , and clay content effects Characterization of recycled thermoplastics-based nanocomposites : polymer-clay compatibil10.1016/j.compositesb.2017.07.057 ↗
59. Mechanical, water absorption, and morphology of recycled polymer blend rice husk flour biocomposites10.1002/app.41494 ↗
60. Enhanced tensile and barrier properties of modified LLDPE with rubbery materials and graphene nanoplatelets for packaging application
61. Tensile and thermal behaviour of linear low- density polyethylene nanocomposite films Tensile and thermal behaviour of linear low-density polyethylene nanocomposite films
62. Effect of conductive polyaniline in thermoplastic natural rubber blends on the mechanical, thermal stability, and electrical conductivity properties10.1002/app.47527 ↗
63. Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties10.1016/j.progpolymsci.2009.09.003 ↗
64. Effects of graphene nanoplatelets and multiwall carbon nanotubes on the structure and mechanical properties of Poly(lactic acid) composites: a comparative study10.3390/app9030469 ↗
65. Improvement on cost-performanve ratio of fiber glass/carbon fiber hybrid composite