journal article·2025-01Open access

Hot deformation physical mechanisms and a unified constitutive model of a solid solution Ti55511 alloy deformed in the two-phase region

Huijie Zhang, Y.C. Lin, Gang Su, Yongfu Xie, Wei Qiu, Ningfu Zeng, Song Zhang, Guicheng Wu

Abstract

In this work, the flow behaviors and microstructure evolution of a solid solution Ti55511 alloy deformed in the two-phase region are investigated by hot compression experiments. Subsequently, The spheroidization mechanisms of α phases and the refinement mechanism of β matrix are analyzed. The alloy exhibits obvious work hardening (WH) and flow softening characteristics. The secondary α phases gradually precipitate and spheroidize, while the primary α phases dissolute above the solution temperature or coarsen when the alloy is deformed below the solution temperature. Meanwhile, the β matrix undergoes continuous dynamic recrystallization (CDRX) behavior. The increase of deformation amounts promotes the simultaneous precipitation and spheroidization of lamellar α phases. Raising deformation temperature inhibits the precipitation and spheroidization of lamellar α phases. However, the maximum values of precipitated and spheroidized lamellar α phase occur at 0.01 s −1 . Higher strain rate can promote CDRX of β matrix between 1003 and 1033 K, but inhibit it between 1063 and 1123 K, indicating differences in the dynamic recrystallization (DRX) mechanism at different temperature regions. A unified constitutive model based on physical mechanisms is proposed. The model takes into account both WH and grain boundary strengthening effects by coupling all parts of phases. Furthermore, the dynamic softening, including dynamic recovery (DRV), spheroidization of lamellar α phases, and CDRX of the β matrix, are also considered. Material constants are determined using a genetic algorithm (GA), and the experimental data align well with the predicted data. Finally, process parameters are optimized based on the model to achieve favorable microstructures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Dynamic softening behavior of TC18 titanium alloy during hot deformation10.1016/j.matdes.2015.01.009 ↗
2. The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy10.1016/j.matdes.2015.06.093 ↗
3. A comparative study on the hot deformation behavior of Ti-5Al-5Mo-5V-3Cr and newly developed Ti-4Al-7Mo-3V-3Cr alloys10.1016/j.vacuum.2019.01.008 ↗
4. Microstructure and mechanical behavior of hot compressed Ti-6V-6Mo-6Fe-3Al10.1016/j.msea.2015.04.047 ↗
5. Collaborative behavior in α lamellae and β phase evolution and its effect on the globularization of TC17 alloy10.1016/j.matdes.2018.03.020 ↗
6. Constitutive modeling and fracture behavior of a biomedical Ti-13Nb-13Zr alloy10.1016/j.msea.2017.05.113 ↗
7. Flow softening during hot working of Ti-6Al-4V with a lamellar colony microstructure10.1016/S1359-6462(99)00061-5 ↗
8. Flow softening and microstructural evolution of near β titanium alloy Ti-35421 during hot compression deformation in the α+β region10.1016/j.jmrt.2022.05.144 ↗
9. Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region10.1016/j.msea.2020.139282 ↗
10. Dynamic recovery and recrystallization in titanium alloys by hot deformation10.1007/s11837-007-0013-8 ↗
11. Mechanism of continuous dynamic recrystallization of Ti−6Al−4V alloy during superplastic forming with sub-grain rotation10.1016/S1003-6326(23)66145-X ↗
12. Hot working of Ti-6Al-4V with a complex initial microstructure10.1007/s12289-018-1457-9 ↗
13. Flow stress prediction using hyperbolic-sine Arrhenius constants optimised by simple generalised reduced gradient refinement10.1016/j.jmrt.2019.12.070 ↗
14. Dynamic spheroidization mechanism and its orientation dependence of Ti-6Al-2Mo-2V-1Fe alloy during subtransus hot deformation10.3390/ma16175752 ↗
15. Nucleation and growth mechanism of α-lamellae of Ti alloy TA15 cooling from an α+β phase field10.1016/j.actamat.2012.12.025 ↗
16. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working10.1016/j.matdes.2010.11.048 ↗
17. Superplasticity of Ti-6Al-4V titanium alloy: microstructure evolution and constitutive modelling10.3390/ma12111756 ↗
18. Constitutive modeling for elevated temperature flow behavior of 42CrMo steel10.1016/j.commatsci.2007.08.011 ↗
19. A characterization for the hot flow behaviors of as-extruded 7050 aluminum alloy10.1515/htmp-2014-0108 ↗
20. Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate10.1016/j.commatsci.2010.08.003 ↗
21. Constitutive equation and microstructure evaluation of an extruded aluminum alloy10.1016/j.jmrt.2015.04.002 ↗
22. A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy10.1016/j.matchemphys.2013.03.022 ↗
23. Flow behavior and constitutive model for Ni-20.0Cr-2.5Ti-1.5Nb-1.0Al superalloy compressed below γ′-transus temperature10.1016/j.msea.2012.04.042 ↗
24. Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations10.1007/s12540-013-1002-9 ↗
25. Hot deformation behaviour and fracture of 10CrMoWNb ferritic-martensitic steel10.1016/j.matdes.2015.02.023 ↗
26. On the high temperature deformation behaviour of 2507 super duplex stainless steel10.1007/s11665-017-2508-y ↗
27. Plastic properties and constitutive equations of 42CrMo steel during warm forming process10.1179/1743284713Y.0000000378 ↗
28. A physically-based constitutive model for hot deformation of Ti-10-2-3 alloy10.1016/j.jallcom.2016.11.208 ↗
29. Constitutive modeling for high-temperature flow behavior of Ti-6242S alloy10.1016/j.msea.2016.11.002 ↗
30. Flow behavior and constitutive equation of Ti-6.5Al-2Sn-4Zr- 4Mo-W-0.2Si titanium alloy10.1007/s11665-016-1963-1 ↗
31. Modelling of the superplastic deformation of the near-α titanium alloy (Ti-2.5Al-1.8Mn) using Arrhenius-Type constitutive model and artificial neural network10.3390/met7120568 ↗
32. A combined Johnson-Cook and Zerilli-Armstrong model for hot compressed typical high-strength alloy steel10.1016/j.commatsci.2010.06.004 ↗
33. A comparative study on Johnson-Cook and modified Johnson-Cook constitutive material model to predict the dynamic behavior laser additive manufacturing FeCr alloy10.1016/j.jallcom.2017.06.251 ↗
34. A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel10.1016/j.matdes.2013.06.010 ↗
35. Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson-Cook model10.1016/j.msea.2013.05.023 ↗
36. Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network10.1016/j.commatsci.2014.05.040 ↗
37. Hot tensile deformation behaviors of TA32 titanium alloy based on back-propagation neural networks and three-dimensional thermal processing maps10.1016/j.jmrt.2022.04.144 ↗
38. Modeling hot deformation behavior of low-cost Ti-2Al-9.2Mo-2Fe beta titanium alloy using a deep neural network10.1016/j.jmst.2018.11.018 ↗
39. Thermal deformation behavior investigation of Ti-10V-5Al-2.5fe-0.1B titanium alloy based on phenomenological constitutive models and a machine learning method10.1016/j.jmrt.2024.01.120 ↗
40. Warm and hot deformation behaviors and hot workability of an aluminum-magnesium alloy using artificial neural network
41. Historical review of internal state variable theory for inelasticity10.1016/j.ijplas.2010.06.005 ↗
42. Mechanical behavior of Ti-6Al-4V at high and moderate temperatures-Part II: constitutive modeling10.1016/S0921-5093(01)01508-8 ↗
43. Microstructural modelling in metals processing10.1016/S0079-6425(00)00004-9 ↗
44. Modelling of microstructure evolution in hot forming using unified constitutive equations10.1016/j.jmatprotec.2005.06.026 ↗
45. Constitutive model for high temperature deformation of titanium alloys using internal state variables10.1016/j.mechmat.2009.10.004 ↗
46. A numerical model based on internal-state-variable method for the microstructure evolution during hot–working process of TA15 titanium alloy10.1016/j.msea.2010.02.009 ↗
47. Constitutive description of flow curve for duplex titanium alloy for hot forming under elevated temperature
48. A dislocation model for the Stress-Strain behavior of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations10.1016/0025-5416(70)90081-9 ↗
49. Kinetics of flow and strain-hardening10.1016/0001-6160(81)90112-7 ↗
50. A novel unified dislocation density-based model for hot deformation behavior of a nickel-based superalloy under dynamic recrystallization conditions10.1007/s00339-016-0333-z ↗
51. Comparative study of accurate descriptions of hot flow behaviors of BT22 alloy by intelligence algorithm and physical modeling
52. Modelling approach for predicting the superplastic deformation behaviour of titanium alloys with strain hardening/softening characterizations10.1088/2053-1591/ab59b5 ↗
53. Microstructural evolution and support vector regression model for an aged Ni-based superalloy during two-stage hot forming with stepped strain rates10.1016/j.matdes.2018.05.022 ↗
54. Unified modeling of flow softening and globularization for hot working of two-phase titanium alloy with a lamellar colony microstructure10.1016/j.jallcom.2014.02.110 ↗
55. Unified modelling of the flow behaviour and softening mechanism of a TC6 titanium alloy during hot deformation10.1016/j.jallcom.2018.03.120 ↗
56. Rheological law and mechanism for superplastic deformation of Ti-6Al-4V10.3390/ma12213520 ↗
57. The plastic deformation of metals- A dislocation model and its applicability
58. A dislocation-based model for all hardening stages in large strain deformation10.1016/S1359-6454(98)00196-7 ↗
59. On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals10.1016/j.jmps.2003.12.007 ↗
60. A study of microstructural length scale effects on the behaviour of FCC polycrystals using strain gradient concepts10.1016/j.ijplas.2004.11.001 ↗
61. An alternative to kinematic hardening in classical plasticity10.1016/j.ijplas.2011.03.003 ↗
62. Simulation of plastic deformation in Ti-5553 alloy using a self-consistent viscoplastic model10.1016/j.ijplas.2017.02.008 ↗
63. Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V10.1016/j.ijplas.2013.04.003 ↗
64. A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region10.1016/j.msea.2020.139692 ↗
65. Hot compressive deformation behavior and microstructure evolution of a Ti-55511 alloy with basket-weave microstructures10.1016/j.vacuum.2019.108878 ↗
66. A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy10.1016/j.ijplas.2020.102862 ↗
67. Microstructure control techniques in primary hot working of titanium alloy bars: a review10.1016/j.cja.2015.07.011 ↗
68. Phase transformation and constitutive models of a hot compressed TC18 titanium alloy in the α+β regime10.1016/j.vacuum.2018.08.020 ↗
69. Characteristics of a hot-rolled near β titanium alloy Ti-733310.1016/j.matchar.2017.04.031 ↗
70. Humphreys · 2004
71. Microstructure evolution and a unified constitutive model of Ti-55511 alloy compressed at stepped strain rates10.3390/ma14226750 ↗
72. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
73. Refinement of the Ti-17 microstructure after hot deformation: coupled mesoscale model10.1016/j.msea.2020.140268 ↗
74. An analysis on the constitutive models for forging of Ti6Al4V alloy considering the softening behavior10.1007/s11665-018-3402-y ↗
75. The generalized Mackenzie distribution: disorientation angle distributions for arbitrary textures10.1016/j.actamat.2009.05.016 ↗
76. A model of continuous dynamic recrystallization10.1016/S1359-6454(03)00078-8 ↗
77. A unified physically based constitutive model for describing strain hardening effect and dynamic recovery behavior of a Ni-based superalloy10.1557/jmr.2015.368 ↗
78. Hybrid identification method of coupled viscoplastic-damage constitutive parameters based on BP neural network and genetic algorithm10.1016/j.engfracmech.2021.108027 ↗