journal article·2022-05Open access

Discovery and identification of arsenic removal products from molten steel by adding rare earth

Hongpo Wang, Jian Kang, Yu Wang

Abstract

The use of scrap steel is bound to increase significantly in the following decades to reduce carbon emissions. However, the enrichment of residual elements in steel production has become a severe problem in recycling scrap steel. Arsenic compounds formed in La-added molten steel were investigated by simulation and experiments, and two of them were identified for the first time. The arsenic compounds turned out to be mainly La–S–As, La–As, and LaAsO4. The crystallographic system of La–S–As was certified cubic with a lattice constant of 0.6060 nm. La–S–As can be considered a solid solution resulting from randomly replacing S atoms of LaS with As, and its chemical formula was proved to be La4S3As. The La–As binary compound was identified as cubic with a lattice constant of 0.6162 nm, and its chemical formula was determined as LaAs. La4S3As started to form in molten steel and aggregated to generate large clusters that floated up mostly. It provides a new strategy for reducing residual elements represented by arsenic in molten steel. LaAsO4 and LaAs were initially generated during solidification and preferred to precipitate at grain boundaries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Extraction and Separation Processes · Metal Extraction and Bioleaching

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Moving toward the circular economy: the role of stocks in the Chinese steel cycle10.1021/es201904c ↗
2. Carbon element flow analysis and CO2 emission reduction in iron and steel works10.1016/j.jclepro.2017.10.211 ↗
3. Effect of arsenic content and quenching temperature on solidification microstructure and arsenic distribution in iron-arsenic alloys10.1007/s12613-015-1125-8 ↗
4. Effect of rare earth Ce on the isothermal oxidation behavior in air of arsenic bearing steels10.1051/metal/2019004 ↗
5. Reducing temper embrittlement by lanthanide additions10.1007/BF03258635 ↗
6. New study concerning development of application of rare earth metals in steels10.1016/j.jallcom.2005.04.090 ↗
7. Effects of Ce on inclusions, microstructure, mechanical properties, and corrosion behavior of AISI 202 stainless steel10.1007/s11665-015-1651-6 ↗
8. Influence of cerium on the microstructure and mechanical properties of an as-cast and Q&T steel10.1080/13640461.2019.1601416 ↗
9. Very high cycle fatigue behavior of bearing steel with rare earth addition10.1016/j.ijfatigue.2019.105263 ↗
10. Effects of rare earth on microstructure and impact toughness of low alloy Cr-Mo-V steels for hydrogenation reactor vessels10.1016/j.jmst.2019.03.012 ↗
11. The deoxidation thermodynamics of cerium and lanthanum in liquid iron10.1007/BF02913571 ↗
12. Equilibria of Ce-Al-O and Nd-Al-O in molten iron10.1002/srin.199701171 ↗
13. Beneficial effect of microalloyed rare earth on S segregation in high-purity duplex stainless steel10.1007/s11661-015-3245-1 ↗
14. Agglomeration characteristics of various oxide inclusions in molten steel containing rare earth element under different deoxidation conditions10.2355/isijinternational.ISIJINT-2020-684 ↗
15. Cerium addition effect on modification of inclusions, primary carbides and microstructure refinement of H13 die steel10.2355/isijinternational.ISIJINT-2020-739 ↗
16. Reaction behaviour between cerium ferroalloy and molten steel during rare earth treatment in the ultra-low carbon Al-killed steel10.2355/isijinternational.ISIJINT-2020-678 ↗
17. Effect of Ce addition on inclusions and grain structure in gear steel 20CrNiMo10.1002/srin.202000394 ↗
18. Transformation of cerium-containing inclusions in ultra-low-carbon aluminum-killed steels during solidification and cooling10.1016/j.jmrt.2020.05.077 ↗
19. Effect of yttrium content on the transformation of inclusions in a Si–Mn-Killed stainless steel10.1007/s11663-021-02206-6 ↗
20. Contributions of rare earth element (La,Ce) addition to the impact toughness of low carbon cast niobium microalloyed steels10.1007/s12540-018-0084-9 ↗
21. The influence of rare earth elements on phase transformation in 25Mn steel during continuous heating10.1007/s11661-018-4891-x ↗
22. Effects of rare earth elements on microstructure evolution and mechanical properties of 718H pre-hardened mold steel10.1016/j.jmst.2019.12.035 ↗
23. Effects of rare-earth micro-alloying on microstructures, carbides, and internal friction of 51CrV4 steels10.1016/j.jallcom.2020.153849 ↗
24. The influence of Ce micro-alloying on the precipitation of intermetallic sigma phase during solidification of super-austenitic stainless steels10.1016/j.jallcom.2019.152418 ↗
25. Study of application of rare earth elements in advanced low alloy steels10.1016/j.jallcom.2007.04.234 ↗
26. Effect of cerium on characteristic of inclusions and grain boundary segregation of arsenic in iron melts10.1002/srin.201400332 ↗
27. Investigation of RE-O-S-As inclusions in high carbon steels10.1007/s11663-017-1081-y ↗
28. Improvement of hot ductility of C-Mn steel containing arsenic by rare earth Ce10.1051/metal/2018030 ↗
29. Inclusion modification in C104Cr saw wire steel with different cerium content10.3390/met9010054 ↗
30. An in situ study of the formation of rare earth inclusions in arsenic high carbon steels10.2355/isijinternational.ISIJINT-2018-853 ↗
31. Distribution of arsenic inclusions in rare earth steel ingots10.3390/met10010146 ↗
32. Evolution of inclusions in steelmaking process of rare earth steels containing arsenic with alumina crucibles10.3390/met10020275 ↗
33. Effect of heterogeneous nucleation on removal of arsenic from molten steel by rare earth addition10.3390/met10050664 ↗
34. Influence of refractory-steel interfacial reaction on the formation behavior of inclusions in Ce-containing stainless steel10.2355/isijinternational.ISIJINT-2015-125 ↗
35. Effect of interfacial reaction behaviour on the clogging of SEN in the continuous casting of bearing steel containing rare earth elements
36. Effect of steel-refractory reactions on removal of arsenic from molten steel with lanthanum additions10.2355/isijinternational.ISIJINT-2020-052 ↗
37. Kinetics of rare-earth effect on the low carbon steel containing arsenic
38. More features, more tools, more CrysTBox10.1107/S1600576717006793 ↗
39. Three-dimensional rotation electron diffraction: software RED for automated data collection and data processing10.1107/S0021889813027714 ↗
40. Structural, electronic and phonon properties of LaX compounds (X=P, As)10.1142/S0217979208049200 ↗
41. Electronic structure of rare-earth sesquioxides and oxysulfides10.1016/j.jallcom.2005.01.068 ↗
42. Ab initio study on structure and phase transition of A-and B-type rare-earth sesquioxides Ln2O3 (Ln=La–Lu, Y, and Sc) based on density function theory10.1016/j.jssc.2007.09.022 ↗
43. Non-stoichiometric metals with strongly varying electron concentration: Gd-monochalcogenides and LaS10.1016/0022-3697(75)90016-5 ↗