Revealing the effect of rapid annealing on nano-crystallization behavior and soft magnetic properties of Fe–Co–B amorphous alloy
Source abstract
Abstract
Rapid annealing (RA), or the application of a high temperature for a short duration, is an efficient strategy to promote the nano-crystallization of Fe-based amorphous alloys and improve their soft magnetic properties. Herein, the ternary Fe-Co-B amorphous alloy is investigated as a typical system to reveal the effect of RA on crystallization behavior and soft magnetic properties. It is found that the large superheating generated during RA significantly increases the homogenous nucleation rate of nanocrystals, while the short duration greatly inhibits the growth kinetics, yielding fine and dense nanograins in the amorphous matrix. The Fe-Co-B alloy shows optimized properties of low coercivity (5.6 A/m) and high saturation magnetization (1.87 T) after RA at 813 K for 3 s. In contrast, the small superheating and long duration used in conventional annealing produce large and sparse grains with single crystal morphology and large coercivity above 30 A/m. This work reveals the thermodynamic and kinetic effects of RA on the nano-crystallization behavior of Fe-based amorphous alloys, showing that the RA treatment (high annealing temperature and short annealing time) can induce in-situ homogeneous nucleation and growth, which may help guide the design of Cu-free amorphous/nanocrystalline alloys with desirable soft magnetic properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic properties of thin films · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
3. Amorphous–nanocrystalline alloys: fabrication, properties, and applications10.1016/j.mtadv.2019.100027 ↗
4. Composition design for Fe-based soft magnetic amorphous and nanocrystalline alloys with high Fe content10.1016/j.matdes.2020.108511 ↗
5. Thermal, magnetic and mechanical behavior of large-sized Fe-based amorphous alloy ribbons by twin-roll strip casting
6. Advances in amorphous and nanocrystalline materials10.1016/j.jmmm.2012.02.088 ↗
7. Amorphous and nanocrystalline materials for applications as soft magnets10.1016/S0079-6425(99)00002-X ↗
8. Effects of minor Sn addition on the glass formation and properties of Fe-metalloid metallic glasses with high magnetization and high glass forming ability
9. Amorphous and nanocrystalline materials for applications as soft magnets10.1016/S0079-6425(99)00002-X ↗
10. Inoue · 1998 · 855
11. Nanocrystalline Cu-free HITPERM alloys with improved soft magnetic properties10.1002/pssa.200306390 ↗
12. Preparation of amorphous Fe–Si–B and Co–Si–B alloy wires by a melt extraction method and their mechanical and magnetic properties
13. Ternary Fe–P–C bulk metallic glass with good soft-magnetic and mechanical properties10.1016/j.scriptamat.2011.06.020 ↗
14. High saturation magnetization and soft magnetic properties of bcc Fe–Zr–B alloys with ultrafine grain structure10.2320/matertrans1989.31.743 ↗
15. Fe-based amorphous soft magnetic alloys with high saturation magnetization and good bending ductility10.1016/j.jallcom.2014.06.093 ↗
16. Yoshizawa · 1999 · 51
17. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
18. Structure and magnetic properties of (Fe0.5Co0.5)88Zr7B4Cu1 nanocrystalline alloys10.1063/1.369007 ↗
19. Thermal and magnetic properties of Hf-containing HITPERM alloys10.1016/j.jmmm.2006.05.025 ↗
20. Applications of nanocrystalline soft magnetic Fe-M-B (M=Zr, Nb) alloys "NANOPERM(R)"10.1109/20.619574 ↗
21. Structural origin of magnetic softening in a Fe-based amorphous alloy upon annealing10.1016/j.jmst.2021.01.098 ↗
22. The atomic structure, magnetic properties and bending ductility of a novel Fe-P-C-B-Si amorphous alloy investigated by experiments and ab initio molecular dynamics10.1016/j.jallcom.2022.164101 ↗
23. Enhanced Ms of Fe-rich Fe-B-Cu amorphous/nanocrystalline alloys achieved by annealing treatments10.1016/j.jallcom.2022.168621 ↗
24. Novel FePCB nanocrystalline alloys induced by indium microalloying
25. Effects of metalloid B addition on the glass formation, magnetic and mechanical properties of FePCB bulk metallic glasses10.1016/j.jmst.2014.10.009 ↗
26. Good soft magnetic properties and ultrahigh mechanical strength for Fe82-85B13-16Si1Cu1 amorphous alloys - ScienceDirect10.1016/j.jallcom.2019.01.150 ↗
27. Microstructure and soft-magnetic properties of FeCoPCCu nanocrystalline alloys10.1016/j.jmst.2019.03.030 ↗
28. Magnetic properties of FeCuNbSiB nanocrystallized by flash annealing under high tensile stress10.1002/pssb.201147088 ↗
29. Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets10.1109/20.104389 ↗
30. Chapter 3 Nanocrystalline soft magnetic alloys10.1016/S1567-2719(97)10007-5 ↗
31. Atom probe tomography study of ultrahigh nanocrystallization rates in FeSiNbBCu soft magnetic amorphous alloys on rapid annealing10.1016/j.actamat.2014.01.031 ↗
32. Fe-P based nanocrystalline alloys with good soft-magnetic properties via Nb microalloying10.1016/j.jnoncrysol.2022.121990 ↗
33. Effect of Co content on structure and magnetic behaviors of high induction Fe-based amorphous alloys10.1016/j.jmmm.2016.02.055 ↗
34. Nanoscale structural heterogeneity and magnetic properties of Fe-based amorphous alloys via Co and Ni additions10.1016/j.jallcom.2022.164067 ↗
35. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
36. Effect of miscible and immiscible element microalloying on crystallization behavior and soft magnetic properties of Fe-P-C-B amorphous alloy10.1016/j.jnoncrysol.2023.122352 ↗
37. Nano-crystallization of amorphous alloys by ultra-rapid annealing: an effective approach to magnetic softening10.1016/j.jallcom.2017.11.110 ↗
38. Nanocrystalline (Fe, Co, Ni) 86B14 soft magnetic alloys prepared by ultra-rapid annealing10.1016/j.jallcom.2021.162544 ↗
39. Effect of continuous rapid annealing on the microstructure and properties of Fe85P11C2B2 amorphous alloy10.1016/j.matlet.2022.131984 ↗
40. Effect of primary α-Fe on soft magnetic properties of FeCuNbSiB amorphous/nanocrystalline alloy10.1016/j.jnoncrysol.2021.121079 ↗
41. Exceptionally high saturation magnetic flux density and ultralow coercivity via an amorphous–nanocrystalline transitional microstructure in an FeCo-based alloy
42. Composition design of high Bs Fe-based amorphous alloys with good amorphous-forming ability10.1016/j.jallcom.2015.09.216 ↗
43. Magnetic softening of the Fe83Si3B11P2Cu1 amorphous/nanocrystalline alloys with large-size pre-existing α-Fe grains by high heating-rate annealing10.1016/j.jmrt.2022.07.051 ↗
44. Effect of cobalt addition on the microstructural evolution, thermal stability and magnetic properties of Fe-based amorphous alloys10.1016/j.vacuum.2019.108911 ↗
45. Li · 2018 · 1
46. Soft magnetic properties of Co-doped FeSiBC amorphous and nanocrystalline alloys10.1016/j.jmmm.2022.170249 ↗
47. Optimization of Fe/Co ratio in Fe(87-x-y)CoxTi7Zr6By alloys for high saturation magnetization10.1016/j.cap.2016.02.005 ↗
48. Soft magnetic FeCo alloys: alloy development, processing, and properties10.1179/174328005X14339 ↗
49. Soft magnetic nanostructures and applications
50. Serrated magnetic properties in metallic glass by thermal cycle10.1088/1674-1056/26/6/066101 ↗
51. Interplay of uniform and random anisotropy in nanocrystalline soft magnetic alloys10.1016/j.actamat.2005.03.008 ↗
52. Effect of heating rate on soft magnetic properties in nanocrystalline Fe80. 5Cu1. 5Si4B14 and Fe82Cu1Nb1Si4B12 alloys
53. Development of soft magnetic amorphous alloys with distinctly high Fe content, Science China Physics10.1007/s11433-017-9051-6 ↗
54. High Bs Fe-based nanocrystalline alloy with high impurity tolerance10.1007/s10853-017-1557-9 ↗
55. Magnetic domains: the analysis of magnetic microstructures
56. Real picture of magnetic domain dynamics along the magnetic hysteresis curve inside an advanced permanent magnet10.1038/s41427-022-00417-0 ↗
57. Formation and crystallization behavior of Fe-based amorphous precursors with pre-existing α-Fe nanoparticles—structure and magnetic properties of high-Cu-content Fe-Si-B-Cu-Nb nanocrystalline alloys10.1016/j.jmst.2020.05.049 ↗
58. Nanocrystal evolution during ultra-fast heating in an amorphous Fe85B15 alloy10.1016/j.scriptamat.2022.115155 ↗
59. Bulk metallic glasses
60. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗