Direct tensile mechanical properties and damage fracture mechanisms of thermally damaged coal measures sandstone under high strain rate loading
Source abstract
Abstract
The direct tensile mechanical properties of highly thermally damaged rock under high strain rate loads are a key basic mechanical problem that must be solved for the stability and effective control of surrounding rock stability in the combustion control area of an underground coal gasification project. In this paper, a two-dimensional equivalent grain-based model (GBM) unit and Split Hopkinson Tension Bar (SHTB) numerical model for thermally damaged coal-measures sandstone were constructed using particle flow code (PFC). The comparison with the experimental results shows that the numerical method can accurately describe the dynamic direct tensile behavior of thermally damaged sandstone. The following conclusions are drawn: The dynamic tensile strength of thermally damaged sandstone shows a significant strain rate-strengthening effect. With the increase in thermal damage temperature, the dynamic tensile strength of sandstone increases first and then decreases. The generation and development of hot cracks in a high-temperature environment is the fundamental reason for the change in macroscopic mechanical properties. The dynamic tensile failure process of thermally damaged sandstone can be divided into four stages: the dynamic damage initiation, the dynamic damage development, the damage crack penetration, and the sample dynamic fracture. With the increase in impact velocity, the initial kinetic energy, elastic strain energy, dissipated energy, and elastic strain energy ratio in the failure process of thermally damaged sandstone gradually increase. In contrast, the dissipated energy ratio gradually decreases. As the heat treatment temperature increases, the elastic strain energy and the ratio of elastic strain energy increase first and then decrease.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geotechnical and Geomechanical Engineering · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Improvement of resource recovery rate for underground coal gasification through the gasifier size management
2. Underground coal gasification and its strategic significance to the development of natural gas industry in China10.1016/S1876-3804(19)60002-9 ↗
3. Determination of random pore model parameters for underground coal gasification simulation10.1016/j.energy.2018.10.156 ↗
4. Analysis of syngas production and reaction zones in hydrogen oriented underground coal gasification
5. Thermodynamic equilibrium simulation on the synthesis gas composition in the context of underground coal gasification
6. Robust tracking of the heating value in an underground coal gasification process using dynamic integral sliding mode control and a gain-scheduled modified Utkin observer10.1016/j.jprocont.2018.11.005 ↗
7. Study on the propagation law of temperature field in surrounding rock of underground coal gasification (UCG) combustion cavity based on dynamic thermal parameters10.1016/j.rinp.2019.02.006 ↗
8. Experimental study on changes of pore structure and mechanical properties of sandstone after high-temperature treatment using nuclear magnetic resonance
9. Metamorphic response characteristics of yellow sandstone after heat treatment under 800-1250 degrees C10.1007/s10973-022-11336-1 ↗
10. Prediction of rockbursts in a typical island working face of a coal mine through microseismic monitoring technology
11. Effects of loading rate on rockburst proneness of granite from energy storage and surplus perspectives10.1007/s00603-022-02990-w ↗
12. Mechanical properties of rock-coal bi-material samples with different lithologies under uniaxial loading10.1016/j.jmrt.2020.12.010 ↗
13. Effects of combination mode on mechanical properties of bi-material samples consisting of rock and coal10.1016/j.jmrt.2022.05.174 ↗
14. Determination of thermal damage in rock specimen using intelligent techniques10.1016/j.enggeo.2018.03.027 ↗
15. Effect of varied durations of thermal treatment on the tensile strength of red sandstone
16. Effects of thermal treatment on physico-morphological properties of Indian fine-grained sandstone10.1007/s10064-017-1149-6 ↗
17. Strain rate effect on the mechanical properties and fracture surface roughness of sandstone subjected to dynamic direct tension10.1109/ACCESS.2020.3001066 ↗
18. Determination of dynamic compressive and tensile behavior of rocks from numerical tests of Split Hopkinson pressure and tension bars10.1007/s00603-016-0954-8 ↗
19. Dynamic rock tensile strengths of Laurentian granite: experimental observation and micromechanical model10.1016/j.jrmge.2016.08.007 ↗
20. Numerical simulation of the rock SHPB test with a special shape striker based on the discrete element method10.1007/s00603-013-0484-6 ↗
21. Dynamic response of rock-like materials based on SHPB pulse waveform characteristics10.3390/ma15010210 ↗
22. Numerical simulation on fracture and acoustic emission behavior of sandstone with partial filling flaw in semi-circular three-point bending tests10.1016/j.tafmec.2023.103841 ↗
23. The influence of individual clay minerals on formation damage of reservoir sandstones: a critical review with some new insights
24. An experimental study of the mechanical properties of granite after high temperature exposure based on mineral characteristics10.1016/j.enggeo.2017.02.010 ↗
25. Macro and micro mechanics behavior of granite after heat treatment by cluster model in particle flow code
26. Failure mechanical behavior of pre-holed granite specimens after elevated temperature treatment by particle flow code10.1016/j.geothermics.2017.10.018 ↗
27. A new rock brittleness index based on the characteristics of complete stress-strain behaviors10.1007/s00603-020-02311-z ↗
28. The effect of calcination on the occurrence and leaching of rare earth elements in coal refuse10.1016/j.jece.2022.108355 ↗
29. Macro-micro mechanical properties of building sandstone under different thermal damage conditions and thermal stability evaluation using acoustic emission technology
30. Physico-mechanical properties of granite after cyclic thermal shock10.1016/j.jrmge.2020.03.001 ↗
31. Study on fatigue characteristics and thermal damage mechanism of red sandstone under high temperature-cyclic load coupling
32. Effect of thermal treatment on the physical and mechanical properties of sandstone: insights from experiments and simulations10.1007/s00603-022-02791-1 ↗
33. Evolution of micro-damage and degradation of macro-mechanical properties of sandstone due to thermal effects10.1007/s10064-023-03094-7 ↗
34. Simultaneous acoustic emissions monitoring and synchrotron X-ray diffraction at high pressure and temperature: calibration and application to serpentinite dehydration10.1016/j.pepi.2011.08.003 ↗
35. The composition, unit cell parameters and microstructure of quartz during phase transformation from alpha to beta as examined by in-situ high-temperature X-ray powder diffraction[J]10.1016/j.jpcs.2018.03.033 ↗
36. Lattice dynamics and molecular-dynamics study of quartz using a many-body variable potential[J]10.1103/PhysRevB.73.174109 ↗
37. Quantitative relationships between the mineral composition and macro mechanical behaviors of granite under different temperatures: insights from mesostructure-based DEM investigations
38. Effect of chamotte on the structural and microstructural characteristics of mullite elaborated via reaction sintering of Algerian kaolin10.1016/j.jmrt.2019.07.009 ↗
39. Numerical investigation on the effect of intergranular contact bonding strength on the mechanical properties of granite using PFC3D-GBM10.1002/nag.3488 ↗
40. Effect of temperature on metakaolin-quartz powder geopolymer binder with different combinations of silicates and hydroxides
41. Investigation on mechanical, tribological and microstructural properties of Al-Mg-Si-T6/SiC/muscovite-hybrid metal-matrix composites for high strength applications10.1016/j.jmrt.2021.03.095 ↗
42. Effect of magnesium salt contamination on the microstructures and properties of metakaolinite-based geopolymer: the role of MgCl2 and MgSO410.1016/j.jmrt.2022.09.019 ↗
43. Thermal study of sandstones from different Czech localities10.1007/s10973-010-1129-6 ↗
44. Liu · Smart Sci Explor Min · 2010 · 1 and 2 · 827