Optimization of numerical parameters and microstructure evolution on 2195 Al–Li alloy extrusion process
Source abstract
Abstract
The present study designed a set of extrusion dies with unequal bearing lengths to investigate the extrusion deformation behavior of 2195 Al-Li alloy. With the standard deviation of the velocity field (SDV) and extrusion force as optimization objectives, the extrusion process parameters (billet temperature, die temperature and extrusion speed) were optimized using Taguchi method and orthogonal test. The results indicate that billet temperature is the most significant factor affecting SDV and extrusion force, with a range of 1.287 and 7.076, respectively. Furthermore, the optimal extrusion parameters were determined as billet temperature 420 °C, die temperature 410 °C and extrusion speed 0.2 mm/s, resulting in the SDV value of 0.3345 and the extrusion force of 17.059 MN. The grains on the extruded profile were flattened and elongated both in the extrusion direction and cross-section, showing obvious <111>∥TD and <100>∥TD preferred orientation, and discontinuous dynamic recrystallization (DDRX) and geometric dynamic recrystallization (GDRX) mostly occurred, but no significant differences in grain size were observed, thus verifying the accuracy of the numerical simulation. Additionally, the ultimate tensile strength, yield strength and elongation of the extruded profile reached 437.1 MPa, 345.9 MPa and 11.7%, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Hot extrusion processing of Al–Li alloy profiles and related issues: a review10.1186/s10033-020-00479-7 ↗
2. Texture and anisotropy in Al-Li alloy 2195 plate and near-net-shape extrusions10.1016/S0921-5093(98)00834-X ↗
3. Microstructure evolution and mechanical properties of as-annealed and solution treated Al-Cu-Li alloy 2195 under dynamic compression10.1016/j.jmatprotec.2022.117516 ↗
4. Effects of extrusion speed of continuous extrusion with double billets on welding performance of 6063 Al alloy10.1016/S1003-6326(21)65598-X ↗
5. Isothermal extrusion speed curve design for porthole die of hollow aluminium profile based on PID algorithm and finite element simulations10.1016/S1003-6326(21)65628-5 ↗
6. A novel protection-type porthole die for manufacturing multi-cavity and thin-walled extrusion profile: numerical simulation, optimization design, and experimental validation10.1007/s00170-021-07582-6 ↗
7. Numerical and experimental study on the rheo-extrusion process of 2A50 aluminium alloy miniature gear10.1016/j.jmrt.2023.03.086 ↗
8. Through-thickness shear texture of the twin-roll cast AA6016 sheet after asymmetric rolling and its recrystallization behavior10.1016/j.jmrt.2020.12.078 ↗
9. A finite element coupled visco-plastic self-consistent simulation to predict micro-texture and anisotropy evolution during single point incremental forming in Al-Li alloy10.1016/j.jmatprotec.2022.117834 ↗
10. Investigation on effects of die orifice layout on three-hole porthole extrusion of aluminum alloy 6063 tubes10.1007/s11665-012-0405-y ↗
11. Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization10.1016/j.jallcom.2017.03.240 ↗
12. Influence of the process setup on the microstructure and mechanical properties evolution in porthole die extrusion10.1016/j.matdes.2014.04.004 ↗
13. Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulation10.1016/j.jmatprotec.2003.09.003 ↗
14. Effect of pocket design on metal flow through single-bearing extrusion dies to produce a thin-walled aluminium profile10.1016/j.jmatprotec.2007.08.033 ↗
15. Effects of billet heating temperature and extrusion speed on the microstructures and mechanical properties of the longitudinal welds in aluminum alloy profiles with complex cross-section10.1016/j.vacuum.2022.111578 ↗
16. Newest developments on the manufacture of helical profiles by hot extrusion
17. Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles10.1016/j.jmatprotec.2016.05.024 ↗
18. Tailoring twist extrusion process; the better strain behavior at the lower required loads10.1016/j.jallcom.2020.157855 ↗
19. A novel method for determining friction in cold forging of complex parts using a steady combined forward and backward extrusion test10.1016/j.jmatprotec.2017.06.001 ↗
20. Multi-response optimization of hot extrusion process parameters using FEM and Grey relation based Taguchi method10.1016/j.matpr.2019.06.316 ↗
21. Soleimanipour · 2022
22. Numerical and experimental investigation of central cavity formation in aluminum during forward extrusion process10.1007/s12206-015-1216-5 ↗
23. Continuous dynamic recrystallization (CDRX) model for aluminum alloys10.1007/s10853-017-1845-4 ↗
24. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
25. Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation10.1016/j.matchar.2021.111629 ↗
26. Production of ultra-fine grain microstructures in Al–Mg alloys by coventional rolling10.1016/S1359-6454(02)00253-7 ↗
27. Geometric dynamic recrystallization in hot torsion of Al-5Mg-0.6Mn (AA5083)10.1016/0921-5093(95)09990-5 ↗
28. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy10.1016/j.matdes.2022.111135 ↗
29. Hot workability of a spray formed 2195 aluminum-lithium alloy based on an improved isothermal processing map and DRX ‘C-curve10.1016/j.matchar.2022.112533 ↗
30. Abnormal grain growth of 2196 Al-Cu-Li alloy weld seams during extrusion and heat treatment10.1016/j.jallcom.2021.159043 ↗
31. Constitutive behavior and microstructural evolution of 2060 Al–Li alloy under high strain rate: experiment and simulation10.1016/j.msea.2022.143048 ↗
32. Characterization of the hot deformation behaviour of an as-extruded Al–Cu–Li alloy by constitutive analysis10.1007/s12540-020-00800-y ↗
33. Cracking behavior and prediction criterion of spray-deposited 2195 Al–Li alloy extrusion profile10.1007/s00170-022-09103-5 ↗
34. A modified constitutive model and microstructure characterization for 2195 Al-Li alloy hot extrusion10.3390/ma16103826 ↗
35. Die structure optimization for a large, multi-cavity aluminum profile using numerical simulation and experiments10.1016/j.matdes.2011.11.013 ↗
36. Production of aluminum AA7075/6060 compounds by die casting and hot extrusion10.1016/j.jmatprotec.2020.116594 ↗
37. Optimal design of second-step welding chamber for a condenser tube extrusion die based on the response surface method and the genetic algorithm10.1080/10426914.2012.736657 ↗
38. Parametric behaviour optimisation of macro and micro hardness for heat treated Al 6061-red mud composite10.1016/j.jmrt.2018.04.018 ↗
39. Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes–aluminium alloy composite through Taguchi method10.1016/j.jmrt.2019.02.008 ↗
40. Evaluating the welding quality of longitudinal welds in a hollow profile manufactured by porthole die extrusion: experiments and simulation10.1016/j.jmapro.2019.01.044 ↗
41. Forward hot extrusion forming process of 4-lobe aluminum alloy helical surface rotor10.1007/s11771-019-4175-7 ↗
42. Microstructural evolution and mechanical properties of 2195 Al-Li alloy processed by rapid solidification and thermo-mechanical processing10.1016/j.jallcom.2023.169794 ↗
43. Hot deformation behavior and microstructure evolution of the spray deposited and secondary hot extruded 2195 Al–Li alloy10.1016/j.jmrt.2022.08.055 ↗
44. Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy10.1016/j.jmatprotec.2018.05.003 ↗
45. Effects of extrusion parameters and post-heat treatments on microstructures and mechanical properties of extrusion weld seams in 2195 Al-Li alloy profiles10.1016/j.jmrt.2019.12.095 ↗
46. Effect of temperature and strain rate on hot deformation behavior and microstructure of Al-Cu-Li alloy10.1016/j.jallcom.2017.06.165 ↗
47. Microstructural evolution and dynamic recrystallization behavior of the homogenized 2195 Al–Li alloy during hot deformation10.1007/s12540-023-01397-8 ↗
48. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 219510.1016/j.jmrt.2019.06.052 ↗
49. Low temperature plasticity of microcrystalline Al–Li alloy10.1016/j.msea.2023.144586 ↗