Microstructural study of additively-manufactured carbon steel-stainless steel 316L - Inconel 625 functionally graded material: Simulation and experimental approaches
Source abstract
Abstract
This study aims to analyze the microstructure and present phases of functionally graded carbon steel - stainless steel 316L - Inconel 625 using experimental methods and computational software (JMatPro). Both FE-SEM and SEM-EDS equipment were employed to evaluate the materials. The JMatPro software accurately simulated the present phases and their formation temperatures. The microstructure in the plain carbon steel part formed the ferrite phase at 900°C, while a small amount of pearlite structure formed at 700°C, remaining stable at ambient temperature. Chromium phase in stainless steel 316 L layers increased with solidification, with a higher increase in the delta ferrite phase. Inconel 625 at 1130°C, the Laves nucleated with austenite, stable up to ambient temperature. As liquid decreased, niobium and molybdenum accumulation increased, potentially leading to Laves formation. The significant increase in niobium content at the interface of stainless steel 316L-Inconel 625 is attributed to an increase in iron content. The research indicated a good correlation between the observed and predicted microstructures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. An overview of functionally graded additive manufacturing
2. Functionally graded rapid prototyping10.1201/b11341-78 ↗
3. Additive manufacturing of functionally graded metallic materials: a review of experimental and numerical studies10.1016/j.jmrt.2021.05.022 ↗
4. A critical review of recent research on functionally graded plates10.1016/j.compstruct.2012.09.001 ↗
5. Types of functionally graded materials and their areas of application
6. Microstructural examination of aluminium-copper functionally graded material developed by powder metallurgy route10.1016/j.matpr.2019.10.007 ↗
7. Microstructure and mechanical characteristics of multi-layered materials composed of 316L stainless steel and ferritic steel produced by direct energy deposition10.1016/j.jallcom.2018.09.390 ↗
8. Tribological performance of wire arc additive manufactured 347 austenitic stainless steel under unlubricated conditions at elevated temperatures10.1016/j.jmapro.2020.04.073 ↗
9. Effects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturing10.1016/j.vacuum.2019.109131 ↗
10. Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing10.1016/j.msea.2017.05.024 ↗
11. Effect of deposition sequence on microstructure and properties of 316L and Inconel 625 bimetallic structure by wire arc additive manufacturing10.1007/s11665-021-06137-w ↗
12. Microstructures and mechanical behavior of the bimetallic additively-manufactured structure (BAMS) of austenitic stainless steel and Inconel 62510.1016/j.jmst.2020.10.001 ↗
13. Influence of alloying elements content on high temperature properties of Ti-V-Cr and Ti-Al-V series titanium alloys: a JMatPro program calculation study10.1088/1742-6596/2639/1/012019 ↗
14. Modelling of materials properties and behaviour critical to casting simulation10.1016/j.msea.2005.09.036 ↗
15. Using JMatPro to model materials properties and behavior10.1007/s11837-003-0013-2 ↗
16. Using JMatPro simulation to study the effect of heat treatment temperature on the dissolution of gamma-prime phase in Inconel 617 nickel-based superalloy
17. A. Alfan, M. Z. Omar, and J. Syarif, “Preliminary study of XW-42 tool steel behavior in SEMI-SOLID zone using JMatPro software.”.
18. Prediction, formation and analysis of microstructure of high chromium-alloyed pm stainless steel sintered in different atmospheres
19. Study on the prediction of tensile strength and phase transition for ultra-high strength hot stamping steel10.1016/j.jmrt.2020.10.043 ↗
20. Modelling the material properties and behaviour of Ni-based superalloys
21. Modeling phase transformations and material properties critical to processing simulation of steels10.1080/10426910903153059 ↗
22. Simulation of the effects of Zr and Co addition on the properties of NiAl-Mo (Cr) alloy10.1051/matecconf/202237009009 ↗
23. Wire arc additive manufacturing of functionally graded carbon steel-stainless steel 316L-Inconel 625: microstructural characterization and mechanical behavior
24. Lippold · 2005
25. Kou · Welding metallurgy · 2003 · 431 · 223
26. Lippold · 2011