Evaluation of cracking damage in electrode materials of a LMO/Al-Lix lithium-ion battery through analysis of acoustic emission signals
Source abstract
Abstract
Damage due to the internal degradation of electrode materials in lithium-ion batteries (LIBs) during charge-discharge cycles can cause capacity fading and safety issues. Therefore, it is essential to assess damage to LIBs using nondestructive methods. In this study, the relationship between the damage mechanism and acoustic emission (AE) activity of a commercial lithium manganese oxide (LMO)/Al-Lix alloy battery is systematically investigated. Microstructural observations of the electrodes revealed that the damage mechanisms of the LMO cathode and Al-Lix anode during accelerated charge-discharge were identical to those of microcracking. Energy, amplitude, duration, rise time, and peak frequency were considered as possible AE parameters for real-time damage detection. The generation of AE hits was prominent during the later stages of the charging and discharging processes. The AE signals produced by damage to the Al-Lix alloy anode during charging had a lower amplitude (0–60 dB) and energy (0–10 aJ). In comparison, those produced by damage to the LMO cathode during charging had a relatively high amplitude (100 dB) and energy (120 aJ). Additionally, the energy levels and amplitudes of the AE signals obtained during discharging decreased with an increasing number of cycles, indicating that they can be used as indicators for evaluating the damage progression of the primary, secondary, and tertiary cracks in LMOs. The AE technique offers the possibility of monitoring and evaluating the damage to the anode and cathode of a commercial full cell separately, as well as predicting the remaining capacity of the battery by monitoring the AE hits.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
2. Main aging mechanisms in Li ion batteries10.1016/j.jpowsour.2005.03.172 ↗
3. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
4. Electrode materials for lithium-ion batteries
5. Nanostructured organic and inorganic materials for Li-ion batteries: a review10.1016/j.mssp.2019.104684 ↗
6. A novel and generalized lithium-ion-battery configuration utilizing Al foil as both anode and current collector for enhanced energy density10.1002/adma.201604219 ↗
7. Unusual size effect in ion and charge transport in micron-sized particulate aluminum anodes of lithium-ion batteries10.1002/anie.202208370 ↗
8. Recent developments in ionic liquid-based electrolytes for energy storage supercapacitors and rechargeable batteries
9. Core–shell aluminum@carbon nanospheres for dual-ion batteries with excellent cycling performance under high rates10.1002/aenm.201701967 ↗
10. Bubble-sheet-like interface design with an ultrastable solid electrolyte layer for high-performance dual-ion batteries10.1002/adma.201606805 ↗
11. Uniform distribution of alloying/dealloying stress for high structural stability of an Al anode in high-areal-density lithium-ion batteries10.1002/adma.201900826 ↗
12. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
13. Inelastic hosts as electrodes for high-capacity lithium-ion batteries10.1063/1.3525990 ↗
14. Lithium ion battery anode aging mechanisms10.3390/ma6041310 ↗
15. Lithium reactions with intermetallic-compound electrodes10.1016/S0378-7753(02)00204-5 ↗
16. A review of lithium-ion battery thermal runaway modeling and diagnosis approaches10.3390/pr10061192 ↗
17. In situ neutron radiography of lithium-ion batteries: the gas evolution on graphite electrodes during the charging10.1016/j.jpowsour.2003.11.065 ↗
18. In situ X-ray diffraction techniques as a powerful tool to study battery electrode materials10.1016/S0013-4686(02)00233-5 ↗
19. Ultrasonic monitoring performance degradation of lithium ion battery10.1016/j.microrel.2020.113859 ↗
20. Estimating battery state of health using electrochemical impedance spectroscopy and the relaxation effect10.1016/j.est.2021.103210 ↗
21. Understanding the degradation of silicon electrodes for lithium-ion batteries using acoustic emission10.1149/1.3489374 ↗
22. Study of solid electrolyte interface formation and lithium intercalation in Li-ion batteries by acoustic emission10.1149/2.045201jes ↗
23. Monitoring of particle fracture by acoustic emission during charge and discharge of Li/MnO2 cells10.1149/1.1838039 ↗
24. Detection of degradation of lithium-ion batteries with acoustic emission technique10.1149/1.3334804 ↗
25. Study of sulfur-based electrodes by operando acoustic emission10.1016/j.electacta.2019.01.019 ↗
26. The sound of batteries: an operando acoustic emission study of the LiNiO2 cathode in Li–ion cells10.1002/batt.202000099 ↗
27. Operando acoustic emission monitoring of degradation processes in lithium-ion batteries with a high-entropy oxide anode10.1038/s41598-021-02685-2 ↗
28. Direct evidence of morphological changes in conversion type electrodes in Li-ion battery by acoustic emission10.1016/j.elecom.2010.07.014 ↗
29. Evaluation of acoustic emission as a suitable tool for aging characterization of LiAl/LiMnO2 cell10.1016/j.electacta.2012.10.121 ↗
30. Damage evaluation in lithium cobalt oxide/carbon electrodes of secondary battery by acoustic emission monitoring10.2320/matertrans.M2014396 ↗
31. Analysis of acoustic characteristics under battery external short circuit based on acoustic emission10.3390/en15051775 ↗
32. Damage analysis of cylindrical lithium-ion cells under three-points bending using acoustic emission10.1016/j.jpowsour.2019.227323 ↗
33. Estimation of remaining useful lifetime of lithium-ion battery based on acoustic emission measurements10.1115/1.4042234 ↗
34. Acoustic emission detection and analysis method for health status of lithium ion batteries10.3390/s21030712 ↗
35. Failure analysis of thermally abused lithium-ion battery cell by microscopy, electrochemical impedance spectroscopy, and acoustic emission
36. Micromechanisms of fracture from acoustic emission10.1016/j.ijrmms.2011.04.001 ↗
37. Fracture interface waves10.1029/95JB02846 ↗
38. A new method for detecting fatigue crack initiation in aluminum alloy using acoustic emission waveform information entropy10.1016/j.engfracmech.2019.106771 ↗
39. Suppression of Jahn–Teller distortion of spinel LiMn2O4 cathode10.1016/j.jallcom.2008.12.081 ↗
40. Electrochemistry of manganese dioxide in lithium nonaqueous cell: III. X-ray diffractional study on the reduction of spinel-related manganese dioxide10.1149/1.2086552 ↗
41. Lithium intercalation into layered LiMnO210.1149/1.1837869 ↗
42. A mathematical model of stress generation and fracture in lithium manganese oxide10.1149/1.2185287 ↗
43. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
44. Circumventing huge volume strain in alloy anodes of lithium batteries
45. Application of Hasselman's crack propagation model to insertion electrodes10.1149/1.3455179 ↗
46. Electrochemical shock” of intercalation electrodes: a fracture mechanics analysis10.1149/1.3464773 ↗
47. Lithium concentration dependent elastic properties of battery electrode materials from first principles calculations10.1149/2.0031411jes ↗
48. The elastic modulus of aluminium-lithium alloys10.1007/BF00591481 ↗