journal article·2023-07Open access

Achieving low activation energy and double-peak texture after hot deformation of Mg–Al–Zn–Ca–Mn–Zr alloy and enabling the strength and ductility

Abdul Malik, Jianyu Long, Chaun Li

Abstract

In this study, the hot-deformation behavior of a die-casted Mg-Al-Zn-Ca-Mn-Zr alloy was investigated in the temperature range of 548-673 K and the strain rate range of 0.0001-1 s-1. The constitutive equation and processing maps were also developed to describe the flow stress behavior. The numerical simulation result revealed an average activation energy of ∼ 139.4 kJ/mol, which is lower than the previously reported AZ31 Mg alloys. Subsequently, the low activation energy imparted a high degree of dynamic recrystallization and was mainly attributed to alloying elements Ca, Mn, and Zr. For optimum hot working parameters, processing maps displayed two different domains, the temperature range of 573-673 K for a strain rate range of 0.001-0.01 s−1 with a peak efficiency of 33% and a temperature of 673 K at a high strain rate of 0.01 s-1 with a peak efficiency of 31%. The microstructure evolution confirmed the validity of parameters and revealed high dynamic recrystallization. The average grain size ∼ 21.1 μm, ∼ 15.4 μm, and ∼ 16.1 μm were achieved at temperatures of 573 K, 623 K, and 673 K under a strain rate of 0.001 s-1. The profuse grain refinement is attributed to the pronounced accumulation of dislocation on grain boundaries and on the eutectic phases. In addition, the morphology of the eutectic phases was broken with the increase in the strain rate and temperature. Thus, the α-Mg and eutectic phases bear the compressive stresses and promote the dynamic recrystallization activity. Last but not least, the double peak texture after hot deformation was developed, which is one of the engineers' main requirements for enhancing the Mg alloy's ductility. Based on the above discussion, the hot deformed specimens exhibited an ultimate compressive strength of ∼ 340 MPa and elongated to fracture > 25%. Consequently, this study enables the understanding of the broad use of Mg-Zn-Al-Ca-Mn-Zr alloys for automobile applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Unveiling the influence of dendrite characteristics on the slip/twinning activity and the strain hardening capacity of Mg-Sn-Li-Zn cast alloys10.1016/j.jma.2022.03.016 ↗
2. Hot deformation of Mg-Y-Zn alloy with a low content of the LPSO phase studied by in-situ synchrotron radiation diffraction10.1016/j.jma.2019.11.009 ↗
3. Critical review of superplastic magnesium alloys with emphasis on tensile elongation behavior and deformation mechanisms10.1016/j.jma.2022.02.009 ↗
4. Revealing the grain size dependent hot workability and deformation mechanisms in a Mg-Zn-Y alloy10.1016/j.jma.2021.08.001 ↗
5. The hot compressive deformation behavior of cast Mg-Gd-Y-Zn-Zr alloys with and without LPSO phase in their initial microstructures10.1016/j.jma.2022.01.006 ↗
6. Tailoring the tensile properties of AZ91 magnesium alloy via grain refinement10.1080/02670836.2022.2082640 ↗
7. Synergistic effects of cerium-based rare earth addition and hot deformation on the microstructure and mechanical properties of Mg-0.5Zn-0.5Zr magnesium alloy10.1007/s12540-021-01065-9 ↗
8. Texture evolution induced by twinning and dynamic recrystallization in dilute Mg-1Sn-1Zn-1Al alloy during hot compression10.1016/j.jma.2019.10.002 ↗
9. Flow softening, twinning and dynamic recrystallization in AZ31 magnesium10.1016/j.msea.2013.06.074 ↗
10. Deformation behavior of Mg–Zn–Zr magnesium alloy on the basis of macro-texture and fine-grain size under tension and compression loading along various directions10.1016/j.jallcom.2020.157740 ↗
11. Effect of pre-straining on twinning, texture and mechanical behavior of magnesium alloys A-review10.1016/j.jmrt.2020.10.023 ↗
12. Microstructure evolution of Mg-Zn-Zr magnesium alloy against soft steel core projectile10.1016/j.jmst.2020.10.074 ↗
13. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗
14. Superplastic behavior of fine-grained extruded ZK61 Mg alloy10.1016/j.rinp.2020.103731 ↗
15. Z. Aalipour, A. Zarei-Hanzaki, A. Moshiri, H.R. Abedi, D. Waryoba, A. Kisko, L.P. Karjalainen, Strain dependency of dynamic recrystallization during thermomechanical processing of Mg-Gd-Y-Zn-Zr alloy, J Mater Res Technol 18 (2022) 591-598.10.1016/j.jmrt.2022.02.120 ↗
16. A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys10.1016/j.jallcom.2022.163964 ↗
17. High strain rate superplasticity via friction stir processing (FSP): a review10.1016/j.msea.2021.141499 ↗
18. Analysis of the hot deformation of ZK60 magnesium alloy10.1016/j.jma.2017.09.002 ↗
19. Modeling of hot deformation behavior and prediction of flow stress in a magnesium alloy using constitutive equation and artificial neural network (ANN) model10.1016/j.jma.2018.05.002 ↗
20. Study on hot deformation behavior of homogenized Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy using a combination of strain-compensated Arrhenius constitutive model and finite element simulation method10.1016/j.jma.2021.07.008 ↗
21. Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression10.1016/j.msea.2021.142026 ↗
22. Hot deformation behavior and processing map of a new type Mg-6Zn-1Gd-1Er alloy10.1016/j.jallcom.2021.158700 ↗
23. Hot deformation constitutive analysis and processing maps of extruded Mg–Gd binary alloys10.1016/j.jmrt.2020.10.101 ↗
24. Hot deformation behavior of Mg-8Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, dynamic recrystallization kinetics, and processing map10.1016/j.mechmat.2019.02.005 ↗
25. Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps10.1016/j.ijmecsci.2020.106069 ↗
26. Deformation mechanism of ZK61 magnesium alloy cylindrical parts with longitudinal inner ribs during hot backward flow forming10.1016/j.jmatprotec.2021.117197 ↗
27. A comparative study of strain rate constitutive and machine learning models for flow behavior of AZ31-0.5 Ca Mg alloy during hot deformation10.3390/math10050766 ↗
28. Effect of Gd on dynamic recrystallization behavior of magnesium during hot compression10.1007/s12540-019-00479-w ↗
29. Hot deformation behavior of extruded Mg–Zn–Y–Zr alloy10.1016/j.jallcom.2015.04.217 ↗
30. Characterization of hot deformation behavior of as-extruded AZ31 alloy through kinetic analysis and processing maps10.1016/j.jmatprotec.2019.116325 ↗
31. Hot deformation behavior of an extruded AZ31 alloy doped with rare-earth elements10.1016/j.jallcom.2020.156961 ↗
32. Hot deformation behavior and microstructure of AZ31-1Sm alloy compression at elevated temperatures10.1016/S1875-5372(15)60003-0 ↗
33. A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation10.1016/j.jma.2020.01.004 ↗
34. Deformation behavior and dynamic recrystallization of a Mg–Zn–Y–Zr alloy10.1016/j.msea.2006.04.103 ↗
35. A constitutive relation of AZ80 magnesium alloy during hot deformation based on Arrhenius and Johnson–Cook model10.1016/j.jmrt.2019.01.003 ↗
36. Dynamic recrystallization and texture development during hot deformation of magnesium alloy AZ3110.1016/S1003-6326(08)60228-9 ↗
37. Hot deformation of cast AZ31 and AZ80 magnesium alloys – influence of Al content on microstructure and texture development10.1016/j.jallcom.2021.162876 ↗
38. Constitutive analysis, twinning, recrystallization, and crack in fine-grained ZK61 Mg alloy during high strain rate compression over a wide range of temperatures10.1016/j.msea.2019.138649 ↗
39. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
40. Instability map for hot working of 6061 Al-10 vol% metal matrix composite10.1088/0022-3727/31/22/020 ↗
41. On the development of instability criteria during hotworking with reference to IN 71810.1016/S0921-5093(98)00764-3 ↗
42. Instability criteria for hot deformation of materials10.1179/095066000771048782 ↗
43. The development of a strong and ductile Mg–Zn–Zr thin sheet through nano precipitates and pre-induced dislocation10.1016/j.msea.2021.141339 ↗
44. Novel Mg-Bi-Mn wrought alloys: the effects of extrusion temperature and Mn addition on their microstructures and mechanical properties10.1016/j.jma.2021.11.028 ↗
45. Dynamic recrystallization behavior of AZ31-0.5Ca magnesium alloy during warm rolling10.1016/j.msea.2019.138085 ↗
46. Effects of calcium on the activity of slip systems in AZ31 magnesium alloy10.1016/j.msea.2018.10.060 ↗
47. Effect of Ca addition on the room-temperature formability of AZ31 magnesium alloy10.1016/j.matlet.2018.12.013 ↗
48. Effect of CaO on structure and properties of AZ61 magnesium alloy
49. Preparation and characterization of a new biomedical Mg–Zn–Ca alloy10.1016/j.matdes.2011.07.058 ↗
50. Evolution of microstructure, phases and mechanical properties in lean as-cast Mg–Al–Ca–Mn alloys under the influence of a wide range of Ca/Al ratio10.1016/j.msea.2020.140322 ↗
51. Effect of calcium on the superplastic behavior of AZ31 magnesium alloy10.1016/j.msea.2021.140874 ↗
52. The deformation and recrystallization behaviour of an Mg-Dy alloy processed by plane strain compression
53. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
54. Constitutive behavior and microstructure evolution of the as-extruded AE21 magnesium alloy during hot compression testing10.1016/j.jallcom.2014.10.006 ↗
55. Analysis of hot deformation behavior of Al 5083–TiC nanocomposite using constitutive and dynamic material models10.1016/j.matdes.2011.12.049 ↗
56. Effect of calcium on the superplastic behavior of AZ31 magnesium alloy
57. Effect of deformation temperature on the slip activity in pure Mg and AZX21110.1016/j.jmrt.2022.06.050 ↗
58. Achieving higher dynamic mechanical response by adjusting texture through twinning in a ZK61 Mg alloy10.1016/j.jallcom.2022.163755 ↗
59. Hot workfability behavior of as-cast Mg–Zn–Y–Zr alloy10.1016/j.msea.2013.11.014 ↗
60. Hot deformation behavior of as-cast Mg–Zn–Mn–Ce alloy in compression10.1016/j.msea.2012.09.094 ↗
61. Hot compression deformation behavior and processing parameters of a cast Mg–Gd–Y–Zr alloy10.1016/j.msea.2010.10.026 ↗
62. Hot compression characteristics and processing maps of a cast Mg–9.5Zn–2.0Y alloy with icosahedral quasicrystalline phase10.1016/j.jallcom.2015.04.158 ↗