journal article·2024-05Open access

Effects of rare earth Ce on TiN inclusion modifications in 20CrMnTi steel under deoxygenation conditions of Si–Ca–Ba alloy

Shuang Liu, Fan Yang, Lixia Liu, Jian Wang, Jun Peng, Fang Zhang, Shengli An

Abstract

20CrMnTi steel is widely used in the gear manufacturing field of engineering machinery. The addition of Ti element to steel can effectively improve its low-temperature impact toughness and enhance its mechanical properties. However, during the smelting process of 20CrMnTi, large-sized TiN inclusions are inevitably formed in the steel, which affects its service performance improvement. This paper focuses on the directional modification behaviors of TiN inclusions in 20CrMnTi gear steel by rare earth Ce under deoxygenation conditions of Si–Ca–Ba alloy. The results show that under the deoxygenation conditions of Si–Ca–Ba alone, there are composite inclusions in 20CrMnTi steel with CaAl12O19 as the core and TiN wrapped around the periphery, all of which have sizes greater than 2 μm. This type of inclusion is square or diamond shaped, and the addition of Si–Ca–Ba deoxygenation alone has poor TiN modification effect on gear steel 20CrMnTi. Adding Ce element can effectively improve the nucleation core of inclusions. The CeAlO3–TiN and (CaAl12O19–Ba–Ce)–TiN composite inclusions are formed, and the TiN inclusions are modified in terms of morphology and size. The average size of inclusions decreases from 4.1 to 3.0 μm, which prevented the excessive growth of pure TiN inclusions to some extent.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Investigation on zener-hollomon parameter in the warm-hot deformation behavior of 20CrMnTi10.1631/jzus.2006.A1453 ↗
2. Study on the effects of Al–Ce composite deoxidations on the modification behaviors of TiN inclusions in 20CrMnTi steel10.1016/j.jmrt.2024.02.194 ↗
3. Titanium nitride precipitation behavior in thin-slab cast high-strength low-alloy steels10.1007/s11661-002-0294-z ↗
4. Production of high-carbon chromium bearing steel in vertical type continuous caster10.2355/isijinternational1966.26.614 ↗
5. Refining process of superclean bearing steel
6. Effects of precipitates and inclusions on the fracture toughness of hot rolling X70 pipeline steel plates10.1007/s12613-012-0632-0 ↗
7. Effect of aluminum on the stress rupture properties of Cr-Mo-V steels10.1007/BF03161823 ↗
8. The deleterious effect of small quantities of aluminum on the stress-rupture properties of a Cr-Mo-V steel
9. Effect of structural factors on the creep properties of modified chromium steels10.1002/srin.199100429 ↗
10. Inclusion control of ferritic stainless steel by alu-minum deoxidation and calcium treatment10.1007/s11663-005-0007-2 ↗
11. Shi · 1991 · vol. 1 · 22
12. Mao JH, Deoxidization effect research of a new Al based complex deoxidizer Chin
13. Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel10.1179/030192303225001748 ↗
14. Steel cleanness requirements for X65 to X80 electric resistance welded line pipe steels10.1179/030192303225001739 ↗
15. Li · 2007 · vol. 2 · 23
16. Study on the influences of adding rare earth Ce on the precipitation behaviors of TiN inclusions in 20CrMnTi10.3390/ma16165598 ↗
17. Effects of Ce-modified TiN inclusions on the fatigue properties of gear steel 20CrMnTi10.3390/cryst13071071 ↗
18. Research of Si-Ca-Ba compound deoxidizer composition optimization for steelmaking China
19. Application of deoxidant Si-Al-Fe in steelmaking production China
20. Discerning phase-matrices for individual nitride inclusions within ultra-high-strength steel: experiment driven DFT investigation10.1039/D1CP05068K ↗
21. Application of Si-Al-Ba-Ca complex deoxidizer in converter steelmaking Steelmaking
22. Unveiling interactions of non-metallic inclusions within advanced ultra-high-strength steel: a spectro-microscopic determination and first-principles elucidation10.1016/j.scriptamat.2021.113791 ↗
23. Wang Hx · 2005 · vol. 40 · 25
24. Study on the precipitation behavior of TiN in the micro alloyed steels
25. Precipitation behavior of TiN in bearing steel10.1016/S0924-0136(02)00850-6 ↗