Influence of ultrasonic surface rolling process on the microstructure and rotating-bending fatigue properties of 7075-T6 aluminum alloys
Source abstract
Abstract
Ultrasonic surface rolling process (USRP) has attracted significant attention in metal surface strengthening due to its ability to tailor microstructural features and enhance mechanical properties. However, its effects on aluminum alloys remain insufficiently understood. This study aims to produce 7075-T6 aluminum alloys with varying surface conditions by adjusting the static pressure during USRP. The influence of gradient hardness and residual stress on rotating-bending fatigue properties was investigated. The results reveal that USRP induces surface gradient layers characterized by work hardening, compressive residual stress, and a high density of dislocations. At a static pressure of 200 N, the surface hardness and residual compressive stress reach 167 HV and 560 MPa, respectively. Enhanced surface hardness inhibits fatigue crack initiation, while compressive residual stress and dislocation density delay crack propagation. Consequently, the fatigue life of the USRP-200 N sample reaches 7.9×10 6 cycles under 300 MPa, approximately 100 times longer than that of the untreated alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Material Properties and Applications · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Microstructural evolution of Al-Zn-Mg-Cu alloy during ultrasonic surface rolling process10.1016/j.matchar.2022.112418 ↗
2. Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment10.1016/j.jallcom.2022.165009 ↗
3. Flow stress constitutive relation of S280 ultrahigh strength stainless steel10.3390/cryst14090819 ↗
4. Fatigue of 7075-T651 aluminum alloy10.1016/j.ijfatigue.2007.07.005 ↗
5. Enhanced fatigue performance of aluminum alloy through surface strengthening treatment10.1016/j.matlet.2021.130864 ↗
6. Enhancing plain fatigue strength in aluminum alloys through shot peening: experimental investigations and a strain energy density interpretation10.1016/j.ijfatigue.2024.108299 ↗
7. Effect of laser shock peening uniformity on bending fatigue life of 20CrNiMo10.1016/j.optlastec.2024.110704 ↗
8. Surface layer strengthening mechanism of 2060 aluminum–lithium alloy after shot-peening10.1016/j.jmrt.2023.02.064 ↗
9. Comparison of strengthening effect and fatigue properties of SAF2205 cruciform welded joints by ultrasonic impact and cavitation jet peening treatment10.1016/j.msea.2022.143717 ↗
10. 7075 aluminum alloy induced by ultrasonic surface rolling: grain refinement and residual stress model analysis and evaluation
11. Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling10.1016/j.jmst.2019.08.030 ↗
12. Mechanism of residual stress and surface roughness of substrate on fatigue behavior of micro-arc oxidation coated AA7075-T6 alloy10.1016/j.surfcoat.2019.125014 ↗
13. Evolution of microstructure and mechanical properties of aluminum alloy induced by turning and ultrasonic surface rolling process10.1016/j.jmrt.2024.05.091 ↗
14. Fatigue behaviors of ultrasonic surface rolling processed AISI 1045: the role of residual stress and gradient microstructure10.1016/j.ijfatigue.2023.107993 ↗
15. Influence of surface integrity on the fatigue performance of TiB2/Al composite treated by ultrasonic deep rolling: experiments and simulations10.1016/j.compositesb.2023.111160 ↗
16. Ultrasonic rolling strengthening effect on the bending fatigue behavior of 12Cr2Ni4A steel gears10.1016/j.engfracmech.2022.109024 ↗
17. Designing a gradient structure in a Ni-based superalloy to improve fretting fatigue resistance at elevated temperatures through an ultrasonic surface rolling process10.1016/j.ijfatigue.2022.107397 ↗
18. Improved fretting fatigue mechanism of surface-strengthened Ti-6Al-4V alloy induced by ultrasonic surface rolling process10.1016/j.ijfatigue.2023.107567 ↗
19. Fatigue performance rejuvenation of corroded 7075-T651 aluminum alloy through ultrasonic nanocrystal surface modification10.1016/j.ijfatigue.2021.106463 ↗
20. Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy10.1016/j.ijfatigue.2019.04.005 ↗
21. Influence of ultrasonic surface rolling on fatigue behavior of 2D12 aluminum alloy
22. Influence of residual stress and its relaxation on the corrosion bending fatigue resistance of EA4T axle steel treated by ultrasonic surface rolling10.1016/j.ijfatigue.2023.107561 ↗
23. Electrochemical corrosion behavior of 7075 aluminum alloy with different ultrasonic surface rolling microstructures10.1016/j.jmrt.2024.04.166 ↗
24. Microstructure and mechanical properties of 7075-T6 aluminum alloy plates by welding with weld reinforcement rolling10.1016/j.msea.2023.145854 ↗
25. Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy10.1016/j.actamat.2020.01.017 ↗
26. Localized corrosion behaviour of AA7150 after ultrasonic shot peening: corrosion depth vs. impact energy10.1016/j.corsci.2017.11.008 ↗
27. Synergistic effects of a combined surface modification technology on rolling contact fatigue behaviors of 20CrMoH steel under different contact stresses10.1016/j.ijfatigue.2021.106487 ↗
28. Improving fatigue performance of Ti-6Al-4V alloy via ultrasonic surface rolling process10.1016/j.jmst.2019.03.036 ↗
29. Surface nanocrystallization of body-centered cubic beta phase in Ti–6Al–4V alloy subjected to ultrasonic surface rolling process10.1016/j.surfcoat.2019.01.045 ↗
30. Distributions of grains and precipitates in gradient lamellae Al–Zn–Mg–Cu alloy by ultrasonic surface rolling processing10.1016/j.msea.2021.141911 ↗
31. Grain refinement mechanism under high strain-rate deformation in machined surface during high speed machining Ti6Al4V10.1016/j.msea.2019.03.011 ↗
32. Enhanced strength and ductility in Al-Zn-Mg-Cu alloys fabricated by laser powder bed fusion using a synergistic grain-refining strategy10.1016/j.jmst.2021.12.078 ↗
33. Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: a comparative study10.1016/j.jallcom.2020.156561 ↗