The relationship between microstructure evolution and impact toughness degeneration of alloy 617B during long term aging
Source abstract
Abstract
Impact toughness degeneration and microstructure evolution of alloy 617B during 650–725°C long-term aging for up to 12,000 h were investigated in present work. It is found that impact toughness decreases apparently even after just 20 h aging in the temperature range of 650–725°C and keeps decreasing with prolonging aging time. Hence, detailed microstructure observation and mechanical property tests were carried out to reveal the essence of impact toughness degeneration during long-term aging. And the reason is confirmed to be the combination effect of plasticity evolution and grain boundary carbide coarsening. The degeneration of impact toughness with prolonging aging time can be divided into rapid decrease stage, slow decrease stage and stable stage. The decrease of plasticity in the major reason for rapid impact toughness degeneration in the initial stage of aging. Grain boundary carbide coarsens obviously during aging and tends to be continuous. This is the major reason for the slow and continuous decrease of impact toughness in the slow decrease stage. Finally, plasticity and grain boundary carbide change little, resulting in the stable stage of impact toughness evolution. Enough attention should be paid on impact toughness degeneration in the evaluation of long-term stability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Low cycle fatigue behavior of salt coated and pre-exposed IN-617 alloy10.1016/j.matchar.2020.110645 ↗
2. Creep behavior in the new AD730TM nickel-based disk superalloy – influence of aging heat treatment and local chemical fluctuations10.1016/j.msea.2019.02.088 ↗
3. Microstructural evolution and stress rupture behaviour of a Ni-Based wrought superalloy during thermal exposure10.1016/j.msea.2021.141659 ↗
4. Evolution behavior of α-Cr phase during long-term exposure of IN718 alloy
5. The microanalysis of precipitation behavior of α-Cr in Inconel 718
6. Effects of Al content on microstructure and stability of GH4169 nickel base alloy
7. Microstructures and impact toughness of A Ni-based superalloy after long-term aging
8. Effects of thermal aging on the microstructure and mechanical properties of a commercial Ni-Cr-Co-Mo alloy (inconel 617)10.1007/BF02659828 ↗
9. Effect of aging on the impact toughness of 25Cr–20Ni–Nb–N steel10.1016/j.msea.2009.12.039 ↗
10. U.S. Program on materials technology for USC power plants
11. Microstructural evolution of a Ni-based superalloy (617B) at 700° C studied by electron microscopy and atom probe tomography10.1016/j.actamat.2011.11.020 ↗
12. Interaction between particle precipitation and creep behavior in the NI-base Alloy 617B: microstructural observations and constitutive material model10.1016/j.msea.2015.06.002 ↗
13. Creep behaviour of as received, aged and cold worked INCONEL 617 at 850°C and 950°C10.1016/j.jnucmat.2010.01.019 ↗
14. Phenomenological model for the effect of strain rate on recrystallization and grain growth kinetics in the 617B alloy10.1016/j.jallcom.2017.11.299 ↗
15. Evolution of twins and substructures during low strain rate hot deformation and contribution to dynamic recrystallization in alloy 617B10.1016/j.msea.2015.10.004 ↗
16. Compounds Phase transformation of alloy 617B during 10000 h aging: an element redistribution-related process10.1016/j.jallcom.2018.06.229 ↗
17. High strength, ductility, and impact toughness at room temperature in hot-extruded FeAl alloys10.1016/S0966-9795(97)00033-2 ↗
18. High temperature degradation of alloy 718 after longtime exposures
19. The analysis of considerably reduction to HR3C's aging impact ductility
20. Research on brittleness and intergranular corrosion tendency of NF709 steels after aging10.3901/JME.2011.14.026 ↗
21. Schedler · 1988 · 207
22. The relationship between hardness and yield stress in irradiated austenitic and ferritic steels10.1016/j.jnucmat.2004.09.024 ↗