journal article·2023-07Open access

Influence of substructures on precipitation behavior and mechanical properties of cryogenic rolled Al–Mg–Si alloys during aging treatment

Xucheng Wang, Yongxing Zhao, Yu Liu, Yuanchun Huang

Abstract

Cryogenic rolling is a promising method to improve the mechanical properties of Al–Mg–Si alloys. In this paper, the effect of artificial aging treatment on the mechanical properties and microstructures of cryogenic rolled Al–Mg–Si sheet is investigated. The hardness and yield strength of cryogenic rolled alloys decrease at the early aging stage, but the hardness and yield strength of room temperature rolled alloys increase at the early aging stage. Besides, substructures (such as dislocations) are observed in cryogenic rolled alloys but not in room temperature rolled alloys after solution treatment, the degree of recrystallization in the cryogenic rolled alloy is inferior to that in room temperature rolled alloy. The differences lead to the difference in strength between cryogenic rolled alloys and room temperature rolled alloys at the early aging stage. A precipitation mechanism is proposed to explain how these substructures promote precipitate nucleation and growth during artificial aging treatment. Based on the precipitation strengthening theory, a precipitation model is used to explain the strengthening contribution from precipitation during aging treatment, the capacity of precipitation strengthening in cryogenic rolled alloy is much higher than that in room temperature rolled alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Enhancing mechanical properties of twin-roll cast Al–Mg–Si–Fe alloys by regulating Fe-bearing phases and macro-segregation10.1016/j.msea.2021.142256 ↗
2. The effect of Mg and Si content on the microstructure, texture and bendability of Al–Mg–Si alloys10.1016/j.msea.2021.141199 ↗
3. Linking mechanical properties to precipitate microstructure in three Al-Mg-Si(-Cu) alloys10.1016/j.msea.2021.140862 ↗
4. Mechanical properties of rolled and aged AA6061 sheets at room-temperature and cryogenic environments10.1016/j.jallcom.2020.158449 ↗
5. Mechanism of low temperature deformation in aluminium alloys10.1016/j.msea.2020.139935 ↗
6. Mechanical properties of Al–Mg–Si alloy sheets produced using asymmetric cryorolling and ageing treatment10.1016/j.msea.2013.01.048 ↗
7. Mechanical and tribological behavior of severely plastic deformed Al6061 at cryogenic temperatures10.1016/j.msea.2016.11.099 ↗
8. Thermal stability evaluation of nanostructured Al6061 alloy produced by cryorolling10.1016/S1003-6326(17)60086-4 ↗
9. A phenomenological model based on nanostructured dislocation cluster interactions to predict the work hardening behavior of cryodeformed materials10.1016/j.ijplas.2020.102772 ↗
10. Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al–Cu–Li alloy10.1016/j.msea.2021.141682 ↗
11. A study on the mechanical properties of cryorolled Al–Mg–Si alloy10.1016/j.msea.2007.07.024 ↗
12. Mechanical anisotropy and microstructural changes during cryorolling of Al–Mg–Si alloy10.1016/j.matchar.2015.07.033 ↗
13. Influence of dislocation structures on precipitation phenomena in rolled Al–Mg–Si alloy10.1016/j.msea.2020.139903 ↗
14. Structures and formation mechanisms of dislocation-induced precipitates in relation to the age-hardening responses of Al-Mg-Si alloys10.1016/j.jmst.2019.11.001 ↗
15. High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling10.1016/j.matchar.2019.04.034 ↗
16. Mechanical properties and surface characteristics of an AA6060 alloy strained in tension at cryogenic and room temperature10.1016/j.msea.2015.09.083 ↗
17. Enhanced aging precipitation behavior and mechanical properties of 6022 Al–Mg–Si alloy with Zr addition10.1016/j.msea.2022.142957 ↗
18. Shearing and rotation of β″ and βʹ precipitates in an Al-Mg-Si alloy under tensile deformation: in-situ and ex-situ studies10.1016/j.actamat.2021.117310 ↗
19. Atomic structures of precipitates in Al–Mg–Si alloys with small additions of other elements10.1002/adem.201800125 ↗
20. The precipitation sequence in Al–Mg–Si alloys10.1016/S1359-6454(98)00059-7 ↗
21. The influence of warm forming in natural aging and springback of Al-Mg-Si alloys10.1007/s12289-018-1406-7 ↗
22. Cluster evolution mechanisms during aging in Al–Mg–Si alloys10.1016/j.actamat.2015.09.027 ↗
23. Mechanisms controlling the artificial aging of Al–Mg–Si alloys10.1016/j.actamat.2011.02.010 ↗
24. Modelling of the age hardening behaviour of Al–Mg–Si alloys10.1016/S1359-6454(00)00301-3 ↗
25. A yield strength model for the Al-Mg-Si-Cu alloy AA611110.1016/S1359-6454(03)00028-4 ↗
26. Early-stage precipitation phenomena and composition-dependent hardening in Al-Mg-Si-(Cu) alloys10.4028/www.scientific.net/MSF.794-796.933 ↗
27. Influence of heat treatment on the microstructure and mechanical properties of 6005 and 6082 aluminium alloys10.1016/j.jmatprotec.2005.02.115 ↗
28. Improvement of mechanical properties of a cryorolled Al-Mg-Si alloy through warm rolling and aging10.1016/j.jallcom.2018.11.012 ↗
29. Precipitation hardening behaviour of Al-Mg-Si alloy processed by cryorolling and room temperature rolling10.1088/2053-1591/aabbd1 ↗
30. The effect of initial aging treatment on the microstructure and mechanical properties of cryorolled 6016 Al alloy10.1016/j.msea.2016.04.099 ↗
31. Development of ultrafine-grained al 6063 alloy by cryorolling with the optimized initial heat treatment conditions10.1016/j.matdes.2010.11.027 ↗
32. Effect of cryorolling on the mechanical properties of AA5083 alloy and the portevin-le chatelier phenomenon10.1016/j.matdes.2014.11.022 ↗
33. Effect of aging and cryorolling on microstructural characterization and mechanical properties of precipitation hardenable 6063Al alloy10.1016/j.msea.2012.04.104 ↗
34. Effect of deep cryogenic treatment on aging processes of Al–Mg–Si alloy10.1134/S0031918X19070111 ↗
35. Superior mechanical properties induced by the interaction between dislocations and precipitates in the electro-pulsing treated Al-Mg-Si alloys10.1016/j.msea.2018.08.029 ↗