journal article·2023-05Open access

To suppress thermomigration of Cu–Sn intermetallic compounds in flip-chip solder joints

Yan-Rong Huang, Dinh-Phuc Tran, Po-Ning Hsu, Shih-Chi Yang, A.M. Gusak, K.N. Tu, Chih Chen

Abstract

We report here an approach to inhibit Cu–Sn intermetallic compounds (IMCs) in flip chip solder joints under thermal-gradient annealing. We reflowed two types of solders joints, Cu/SnAg/Cu and Cu/SnAg/Ni, in an oven (isothermal) and on a hot plate (with thermal-gradient) at 260 °C. During the isothermal reflow, the IMC growth rates in the top and bottom sides of the solder joint were ∼4.0 × 10−2 and 8.9 × 10−2 μm/min, respectively. However, the IMC growth rate increased to 7.8 × 10−1, 7.9 × 10−1, and 8.9 × 10−1 μm/min in the cold ends with low, medium, and high thermal gradients, respectively. Yet, the IMC thickness on the hot ends remained almost unchanged. These results indicate that the thermal gradient has facilitated the Cu–Sn IMC formation in the cold ends. But, when a Ni film was sandwiched at the cold end, the IMC growth rates in the cold end were reduced to ∼9.7 × 10−2, 1.4 × 10−1, and 1.5 × 10−1 μm/min with low, medium, and high thermal gradients, respectively, indicating that the thermomigration of IMCs was retarded by the Ni. It is speculated that the Ni layer transformed the IMCs on the hot end into stable (Cu,Ni)6Sn5 ternary IMCs, and thus the thermomigration of Cu was suppressed. A kinetic model is also proposed to address the competitive reactions of Cu-molten solder joints.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Solid logic technology: versatile, high-performance microelectronics10.1147/rd.82.0102 ↗
2. Tin–lead (SnPb) solder reaction in flip chip technology10.1016/S0927-796X(01)00029-8 ↗
3. Recent advances and new trends in flip chip technology10.1115/1.4034037 ↗
4. Development of liquid cooling techniques for flip chip ball grid array packages with high heat flux dissipations10.1109/TCAPT.2004.843164 ↗
5. Tummala · 2012
6. Tu · 2007
7. Intermetallic compound formation mechanisms for Cu-Sn solid–liquid interdiffusion bonding10.1007/s11664-012-2060-3 ↗
8. Degradation of Cu6Sn5 intermetallic compound by pore formation in solid–liquid interdiffusion Cu/Sn microbump interconnects10.1016/j.mee.2013.12.003 ↗
9. Thermomigration of Cu–Sn and Ni–Sn intermetallic compounds during electromigration in Pb-free SnAg solder joints10.1557/jmr.2011.25 ↗
10. Diffusion zwischen ungleich erwärmten Orten gleich zusammengesetzter Lösung, Aus der KK Hof-und Staatsdruckerei
11. Thermomigration and electromigration in zirconium10.1103/PhysRev.179.601 ↗
12. Diffusion of Au and Cu in a temperature gradient10.1063/1.1702479 ↗
13. Thermomigration in solder joints10.1016/j.mser.2012.11.001 ↗
14. The Soret effect: a review of recent experimental results10.1115/1.1992517 ↗
15. Electromigration failure mechanisms for SnAg 3.5 solder bumps on Ti∕ Cr-Cu∕ Cu and Ni (P)∕ Au metallization pads10.1063/1.1788837 ↗
16. Infrared microscopy of hot spots induced by Joule heating in flip-chip SnAg solder joints under accelerated electromigration10.1063/1.2151255 ↗
17. Effect of Al-trace dimension on Joule heating and current crowding in flip-chip solder joints under accelerated electromigration10.1063/1.2198809 ↗
18. In situ observation of thermomigration of Sn atoms to the hot end of 96.5 Sn-3Ag-0.5 Cu flip chip solder joints10.1063/1.3671404 ↗
19. Mechanism for serrated cathode dissolution in Cu/Sn/Cu interconnect under electron current stressing10.1016/j.actamat.2011.12.021 ↗
20. Relieving hot-spot temperature and current crowding effects during electromigration in solder bumps by using Cu columns10.1007/s11664-007-0232-3 ↗
21. In situ observation of the void formation-and-propagation mechanism in solder joints under current-stressing10.1016/j.actamat.2005.01.014 ↗
22. Interstitial diffusion of copper in tin10.1063/1.1710127 ↗
23. Interdiffusion and reaction in bimetallic Cu-Sn thin films10.1016/0001-6160(73)90190-9 ↗
24. Kinetics of interfacial reaction in bimetallic CuSn thin films10.1016/0001-6160(82)90201-2 ↗
25. Rapid formation of intermetallic compounds interdiffusion in the Cu-Sn and Ni-Sn systems
26. Tu KN Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening10.1103/PhysRevB.53.16027 ↗
27. Effects of reactive diffusion on stress evolution in Cu–Sn films10.1016/j.scriptamat.2004.03.032 ↗
28. Morphologies, orientation relationships and evolution of Cu6Sn5 grains formed between molten Sn and Cu single crystals10.1016/j.actamat.2008.01.055 ↗
29. Interfacial reactions between lead-free solders and common base materials10.1016/j.mser.2005.03.001 ↗
30. Initial formation of CuSn intermetallic compounds between molten SnAgCu solder and Cu substrate10.1016/j.scriptamat.2008.10.029 ↗
31. Mechanical properties of Cu6Sn5 intermetallic by micropillar compression testing10.1016/j.scriptamat.2010.05.009 ↗
32. Dramatic morphological change of scallop-type Cu6Sn5 formed on (001) single crystal copper in reaction between molten SnPb solder and Cu10.1063/1.2761840 ↗
33. On the interfacial phase growth and vacancy evolution during accelerated electromigration in Cu/Sn/Cu microjoints10.1016/j.actamat.2018.08.049 ↗
34. A study on interfacial phase evolution during Cu/Sn/Cu soldering with a micro interconnected height10.1016/j.matchar.2017.06.033 ↗
35. Fabrication of Cu6Sn5 single-crystal layer for under-bump metallization in flip-chip packaging10.1016/j.intermet.2013.05.005 ↗
36. Quasi-in-situ observation on diffusion anisotropy dominated asymmetrical growth of Cu-Sn IMCs under temperature gradient10.1016/j.actamat.2021.117168 ↗
37. Tu · 1996
38. Thermo-and electro-transport in solids
39. Ragone · 1995
40. Kinetic study of the intermetallic compound formation between eutectic Sn–3.5 Ag alloys and electroplated Ni metallization in flip-chip solder joints10.1557/jmr.2012.22 ↗
41. Effects of joining sequence on the interfacial reactions and substrate dissolution behaviors in Ni/solder/Cu joints10.1007/s11664-011-1666-1 ↗
42. Study of intermetallic growth and kinetics in fine-pitch lead-free solder bumps for next-generation flip-chip assemblies10.1007/s11664-012-2302-4 ↗
43. Kinetic theory of flux-driven ripening10.1103/PhysRevB.66.115403 ↗
44. Size distribution and morphology of Cu6Sn5 scallops in wetting reaction between molten solder and copper10.1016/j.actamat.2007.11.009 ↗
45. Extremely rapid grain growth in scallop-type Cu6Sn5 during solid–liquid interdiffusion reactions in micro-bump solder joints10.1016/j.scriptamat.2020.01.005 ↗
46. Phase growth competition in solid/liquid reactions between copper or Cu3Sn compound and liquid tin-based solder10.1007/s10854-014-2221-7 ↗
47. Solder/substrate interfacial reactions in the Sn-Cu-Ni interconnection system10.1007/s11664-006-0028-x ↗