Effects of plasma electrolytic polishing treatment on the surface morphology, microstructure and corrosion resistance of additively manufactured TC4 titanium alloy
Source abstract
Abstract
This study investigates the effect of plasma electrolytic polishing (PEP) on the surface morphology and corrosion resistance of TC4 titanium alloy parts fabricated by selective laser melting (SLM). Mechanical polishing (MP) was used as the control group. The surface topography, micromorphology, phase composition, open circuit potential (OCP), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) of both PEP- and MP-treated samples were compared and analyzed. The results demonstrate that the PEP process effectively eliminates the surface defects inherent to SLM, resulting in a smoother and more uniform surface compared to the MP-treated samples. Electrochemical analysis, including PDP and EIS, suggests that the oxide film formed after PEP treatment offers superior corrosion resistance. This enhancement is attributed to the higher β-phase content (18.4%) in the PEP-treated SLMed TC4 alloy, which contributes to the formation of a more stable oxide layer and increased charge transfer resistance. These findings expand the application of PEP technology and offer new solutions for enhancing the surface quality and corrosion resistance of additively manufactured TC4 titanium alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Microstructure and mechanical properties of as-built and heat-treated Ti-6Al-4V alloy prepared by cold metal transfer additive manufacturing10.1016/j.jmapro.2019.04.012 ↗
2. The trajectory of additively manufactured titanium alloys with superior mechanical properties and engineered microstructures
3. An overview of surface modification, A way toward fabrication of nascent biomedical Ti-6Al-4V alloys10.1016/j.jmrt.2023.04.046 ↗
4. High fatigue resistance in a titanium alloy via near-void-free 3D printing10.1038/s41586-024-07048-1 ↗
5. Precise design, preparation, and biomechanical evaluation of customized additively manufactured Ti6Al4V porous fusion cage10.1016/j.jmrt.2024.11.121 ↗
6. Mechanical and biocompatibility studies on additively manufactured Ti6Al4V porous structures infiltrated with hydroxyapatite for implant applications10.1016/j.jallcom.2024.177966 ↗
7. Preparation of titanium oxide and hydroxyapatite on Ti-6Al-4V alloy surface and electrochemical behaviour in bio-simulated fluid solution10.1016/j.corsci.2013.11.059 ↗
8. Effects of pH and H2O2 on the chemical mechanical polishing of titanium alloys10.1016/j.jmatprotec.2021.117204 ↗
9. Process and corrosion property of laser-chemical hybrid polishing of TC4 alloy10.1016/j.jmapro.2023.06.038 ↗
10. On morphological surface features of the parts printed by selective laser melting (SLM)
11. Recent advance in laser powder bed fusion of Ti-6Al-4V alloys: microstructure, mechanical properties and machinability10.1080/17452759.2024.2446952 ↗
12. Comparison of two-step surface treatment on surface roughness and corrosion resistance of TC4 alloy parts prepared by SLM and SEBM10.1016/j.jallcom.2022.165929 ↗
13. Additive manufacturing of titanium alloys: processability, properties, and applications10.1002/adem.202301122 ↗
14. Principle, process, and application of metal plasma electrolytic polishing: a review10.1007/s00170-021-07012-7 ↗
15. Optimization and mechanism of precise finishing of TC4 alloy by plasma electrolytic polishing10.1016/j.surfcoat.2023.129696 ↗
16. Application of electrochemical polishing in surface treatment of additively manufactured structures: a review10.1016/j.pmatsci.2023.101109 ↗
17. Plasma electrolytic polishing of nitrided steel under force convection condition10.1088/1757-899X/672/1/012020 ↗
18. Electrolytic plasma surface polishing of complex components produced by selective laser melting10.3103/S1068798X18060035 ↗
19. Surface electrolytic-plasma polishing of Ti-6Al-4V alloy with ultrafine-grained structure produced by severe plastic deformation
20. Plasma electrolytic polishing process and performance for TC4 made by selective laser melting
21. Microstructural features and surface hardening of ultrafine-grained Ti-6Al-4V alloy through plasma electrolytic polishing and nitrogen ion implantation10.3390/met11050696 ↗
22. Effect of surface roughness on corrosion behaviour of low carbon steel in inhibited 4M hydrochloric acid under laminar and turbulent flow conditions10.1016/j.corsci.2015.11.019 ↗
23. Process understanding of plasma electrolytic polishing through multiphysics simulation and inline metrology10.3390/mi10030214 ↗
24. Combination of plasma electrolytic processing and mechanical polishing for single-crystal 4H-SiC10.3390/mi12060606 ↗
25. Electrochemical behaviour of Ti-6Al-4V alloy and Ti in azide and halide solutions10.1016/j.corsci.2011.05.003 ↗
26. Electrochemical polarization: I . A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
27. Description of the frequency behaviour of metal-SiO2-GaAs structure characteristics by electrical equivalent circuit with constant phase element10.1016/S0040-6090(02)00506-0 ↗
28. Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application10.1016/0013-4686(95)00465-3 ↗
29. A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments10.1016/j.jmst.2017.11.021 ↗
30. How do titanium and Ti6Al4V corrode in fluoridated medium as found in the oral cavity? An in vitro study10.1016/j.msec.2014.11.055 ↗
31. Effect of fluoride and albumin concentration on the corrosion behavior of Ti-6Al-4V alloy10.1016/S0142-9612(02)00315-0 ↗
32. Effects of fluoride concentration and elastic tensile strain on the corrosion resistance of commercially pure titanium10.1016/S0142-9612(01)00079-5 ↗
33. Modelling of phase transformation kinetics in Ti alloys-Isothermal treatments10.1016/j.actamat.2005.03.014 ↗
34. Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline10.1016/j.corsci.2017.05.003 ↗
35. Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: influence of alloying element Al10.1016/j.corsci.2020.108605 ↗
36. The electrochemical impedance response of transpassive dissolution of chromium in neutral solutions containing sodium chloride and sodium fluoride10.1016/0010-938X(95)00092-X ↗
37. Characterisation of passive films formed on mild steels in bicarbonate solution by EIS10.1016/S0013-4686(02)00077-4 ↗