Phase evolution, mechanical properties, and corrosion behavior of FeCoNiCu-based high-entropy alloys
Source abstract
Abstract
This study comprehensively investigates the phase microstructure, mechanical properties, and corrosion behavior of FeCoNiCu and its Mo, Si, Cr, and Nb-substituted high-entropy alloys (HEAs). X-ray diffraction (XRD) revealed a single FCC phase in FeCoNiCu and FeCoNiCuMo, while FeCoNiCuSi exhibited a complex multiphase structure (BCC + FCC + intermetallics), FeCoNiCuCr a dual-FCC phase, and FeCoNiCuNb an FCC phase with a Co 2 Nb intermetallic. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirmed these phase distributions and revealed elemental segregation in Mo, Si, Cr, and Nb-containing alloys. Mechanical compression tests showed ductile behavior for FeCoNiCu (yield strength 170 MPa), FeCoNiCuMo (330 MPa), and FeCoNiCuCr (165 MPa), while FeCoNiCuSi (fracture strength 116 MPa) and FeCoNiCuNb (458 MPa) exhibited brittle fracture, correlating with their complex microstructures and high hardness (863 HV and 414 HV, respectively). Electrochemical corrosion studies in NaCl solution showed that FeCoNiCuNb exhibited the lowest corrosion current density, attributed to a semi-passive Nb 2 O 5 -rich layer confirmed by electrochemical impedance spectroscopy (EIS). The EIS evaluation revealed a total corrosion resistance of 45.666 kΩ cm 2 for FeCoNiCuNb, significantly higher than FeCoNiCu (17.701 kΩ cm 2 ), FeCoNiCuMo (1.582 kΩ cm 2 ), FeCoNiCuCr (1.738 kΩ cm 2 ), and FeCoNiCuSi (4.234 kΩ cm 2 ), indicating less developed passive films and more active corrosion behavior in the other compositions. The interplay between phase microstructure, mechanical response, and corrosion resistance highlights the critical role of alloying additions in tailoring the overall performance of these high-entropy alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
3. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
4. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. Thermal expansion, elastic and magnetic properties of FeCoNiCu-based high-entropy alloys using first-principle theory10.1007/s11837-017-2565-6 ↗
6. Effect of Fe content upon the microstructures and mechanical properties of FexCoNiCu high entropy alloys
7. Effects of varying copper content on the microstructure and mechanical properties of FeCoNiCu x10.1007/s11595-022-2621-0 ↗
8. Ultrawide-frequency electromagnetic-wave absorption based on FeCoNiCu x Mn high entropy alloys synthesized through swing ball-milling10.1039/D2TC03913C ↗
9. High entropy alloy FeCoNiCu matrix composites reinforced with in-situ TiC particles and graphite whiskers10.1016/j.matchemphys.2018.09.022 ↗
10. Microstructure and mechanical properties of in-situ TiC reinforced FeCoNiCu2. 0 high entropy alloy matrix composites
11. Multifunctional interstitial-carbon-doped FeCoNiCu high entropy alloys with excellent electromagnetic-wave absorption performance10.1016/j.jmst.2021.09.025 ↗
12. Study on the structure evolution of (FeCoNiCu) Nx high-entropy thin film10.1016/j.vacuum.2024.113815 ↗
13. Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy
14. Multi-site synergistic hydrogen evolution reactions on porous homogeneous FeCoNiCu high-entropy alloys fabricated by solution combustion synthesis and hydrogen reduction10.1016/j.jallcom.2024.175356 ↗
15. Two-step hydrogen reduction of oxides for making FeCoNiCu high entropy alloy: Part I–Process and mechanical properties10.1016/j.matchar.2022.112271 ↗
16. Electrochemical preparation and homogenization of face-centered FeCoNiCu medium entropy alloy electrodes enabling oxygen evolution reactions10.1016/j.electacta.2021.138142 ↗
17. Stansbury · 2000
18. A novel AlCo1. 2Cr0. 8FeNi2. 1 eutectic high entropy alloy with excellent corrosion resistance10.1016/j.jallcom.2024.175006 ↗
19. Effect of Cr content on the structure and corrosion properties of (FeCoNi) 0.75 Cu0. 25-xCrx high entropy alloys in 1 M H2SO410.1016/j.jmrt.2025.02.184 ↗
20. Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates10.1016/j.corsci.2017.01.016 ↗
21. Effect of grain size on the corrosion resistance of the Fe41Mn25Ni24Co8Cr2 high entropy alloy10.1016/j.corsci.2024.111892 ↗
22. Mechanically alloyed (FeCoNi)75Cu25−xSix high entropy alloys: phase evaluation and magnetic properties10.1016/j.jallcom.2023.170030 ↗
23. Characterization of FeCoNiCr high-entropy alloys manufactured by powder metallurgy technique10.1016/j.jmrt.2024.03.054 ↗
24. Phase stability and mechanical properties of an ultra-fine grain FeCoNiCu0. 4Al0. 4 high entropy alloy
25. (FeCoNi)75Cu25-xSix high entropy alloys prepared by mechanical alloying and spark plasma sintering: microstructure, deformation behavior and dynamic recrystallization kinetics10.1016/j.matchar.2024.113861 ↗
26. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
27. The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution10.1016/S0142-9612(03)00252-7 ↗
28. The point defect model for the passive state10.1149/1.2069096 ↗
29. Effect of Nb content on the microstructure and corrosion resistance of FeCoCrNiNbx high-entropy alloys in chloride ion environment10.1016/j.jallcom.2022.168013 ↗
30. Comparative corrosion behavior of Fe50Mn30Co10Cr10 dual-phase high-entropy alloy and CoCrFeMnNi high-entropy alloy in 3.5 wt% NaCl solution10.1016/j.jallcom.2020.155824 ↗
31. Corrosion behavior and passive film characterization of Fe50Mn30Co10Cr10 dual-phase high-entropy alloy in sulfuric acid solution10.1149/1945-7111/ab8de4 ↗
32. A study on the structural, wear, and corrosion properties of CoCuFeNiMo high-entropy alloy10.1016/j.jallcom.2024.174881 ↗
33. Investigation of FeCoNiCu properties: thermal stability, corrosion behavior, wettability with Sn-3.0 Ag-0.5 Cu and interlayer formation of multi-element intermetallic compound10.1016/j.apsusc.2021.148931 ↗
34. Corrosion behavior of NbxCu0. 3Cr2Fe2Ni3Mn2 high-entropy alloys in HNO3 solution10.1016/j.rinp.2023.106780 ↗
35. Microstructure and electrochemical properties of CoCrCuFeNiNb high-entropy alloys coatings10.1007/s40195-014-0117-4 ↗
36. Microstructure and corrosion behaviour of FeCoNiCuSnx high entropy alloys10.1179/1743284714Y.0000000730 ↗
37. Enhanced electromagnetic-wave absorbing performances and corrosion resistance via tuning Ti contents in FeCoNiCuTi x high-entropy alloys10.1021/acsami.1c25079 ↗