journal article·2023-07Open access

Anisotropy of wear and tribocorrosion properties of L-PBF Ti6Al4V

Heng Liu, Xin Huang, Shiyu Huang, Lijie Qiao, Yu Yan

Abstract

Additive manufactured Ti6Al4V has shown high tensile anisotropy. The tribocorrosion properties involve the coupling of mechanical wear and surface corrosion, and its anisotropy is unclear. In this study, the corrosion resistance of the horizontal (XOY) plane and the vertical (V) plane was compared by electrochemical tests. The wear resistance and tribocorrosion resistance of different planes of laser powder bed fusion (L-PBF) Ti6Al4V were tested by using zirconia ball as friction pair. The results show that the corrosion resistance of the V plane was better than that of the XOY plane. However, the wear and tribocorrosion resistance recorded for the XOY plane was better than that of the V plane. The columnar crystals along the building direction led to the anisotropy of wear and tribocorrosion of L-PBF Ti6Al4V.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering10.1089/ten.tec.2008.0288 ↗
2. Bioactive Ti metal analogous to human cancellous bone: fabrication by selective laser melting and chemical treatments10.1016/j.actbio.2010.09.034 ↗
3. Biomedical titanium alloys and their additive manufacturing10.1007/s12598-016-0793-5 ↗
4. On the characteristics of titanium alloys for the aircraft applications10.1016/j.matpr.2017.07.249 ↗
5. Additive manufacturing of titanium alloy for aircraft components10.1016/j.procir.2015.08.061 ↗
6. Cost-affordable titanium: the component fabrication perspective10.1007/s11837-007-0074-8 ↗
7. Direct laser fabrication of three dimensional components using SC420 stainless steel10.1016/j.matdes.2012.12.062 ↗
8. Research status of laser cladding on titanium and its alloys: a review10.1016/j.matdes.2014.01.077 ↗
9. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
10. Anisotropic tensile behavior of Ti6Al4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
11. Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures
12. Effect of building direction on the mechanical anisotropy of biocompatible Co–Cr–Mo alloy manufactured by selective laser melting process10.1016/j.jallcom.2020.155055 ↗
13. Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites10.1016/j.jallcom.2017.08.022 ↗
14. Microstructure and mechanical behaviour of Ti6Al7Nb alloy produced by selective laser melting10.1016/j.matchar.2011.03.006 ↗
15. Fabrication of large Ti6Al4V structures by direct laser deposition10.1016/j.jallcom.2014.12.234 ↗
16. Microstructural control during direct laser deposition of a β-titanium alloy10.1016/j.matdes.2015.05.031 ↗
17. Anisotropic response of Ti6Al4V alloy fabricated by 3D printing selective laser melting10.1016/j.msea.2016.11.061 ↗
18. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti6Al4V10.1016/j.msea.2014.07.086 ↗
19. Mechanical properties of additive manufactured titanium (Ti6Al4V) blocks deposited by a solid-state laser and wire10.1016/j.matdes.2011.06.062 ↗
20. On the size and orientation effect in additive manufactured Ti6Al4V10.1016/j.matdes.2019.108235 ↗
21. Wear anisotropy of selective laser melted 316L stainless steel10.1016/j.wear.2019.04.001 ↗
22. Microstructure and corrosion resistance of laser additively manufactured 316L stainless steel10.1007/s11837-016-1822-4 ↗
23. Anisotropy of microstructure and corrosion resistance of 316L stainless steel fabricated by wire and arc additive manufacturing10.1016/j.corsci.2022.110549 ↗
24. Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel10.1016/j.matdes.2021.109999 ↗
25. Distinction in corrosion resistance of selective laser melted T6Al4V alloy on different planes10.1016/j.corsci.2016.06.009 ↗
26. Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy10.1016/j.jmatprotec.2018.11.008 ↗
27. Micro-abrasion–corrosion of a Co–Cr/UHMWPE couple in Ringer's solution: an approach to construction of mechanism and synergism maps for application to bio-implants10.1016/j.wear.2010.04.022 ↗
28. Effect of surface oxidation on wear and tribocorrosion behavior of forged and selective laser melting-based TC4 alloys10.1016/j.triboint.2022.107780 ↗
29. Synergistic effect of fretting wear and sliding wear of Co-alloy and Ti-alloy in Hanks' solution10.1016/j.wear.2007.01.102 ↗
30. Effect of frictional frequency on the subsurface evolution of 316L stainless steel in tribocorrosion and its influence on the synergistic effect between corrosion and wear10.1016/j.triboint.2022.108026 ↗