journal article·2024-11Open access

Molten pool macroscopic thermodynamic analysis during selective laser melting of AlSi10Mg: Simulations and experiments

Yuting Xu, Yuze Li, Lingjie Wang, Yinghao Song, Kangan Li, Hui Xing, Biao Chen, Jianyuan Wang

Abstract

In this study, the three-dimensional (3D) finite element model of COMSOL Multiphysics was used to simulate the thermodynamic behavior of the AlSi10Mg molten pool (MP) during selective laser melting (SLM), and the results were verified by multiple groups of single-track SLM experiments. The simulations take into account numerous thermophysical phenomena such as fluid flow, heat conduction, heat radiation, and fluid mass transfer. The influence of laser power, scanning speed, and other process parameters on temperature, shape, and size of MP was investigated. The simulated results and the experimental validation show that the model predictions are highly consistent with the measured data for most sets laser parameters, especially the MP width of 142 μm vs. 145 μm, depth of 53 μm vs. 56 μm at a laser power of 250 W and a scanning speed of 1000 mm/s, which confirms the reliability and accuracy of the model. Furthermore, the model innovatively forecasts the critical parameters for solidification in MP and delves into the intricate relationship between the position in MP and key parameters such as temperature gradient, cooling rate, and solidification rate. The model's versatility ensures its applicability to SLM simulation processes across diverse alloys and varying parameters. This research not only enhances our comprehension of SLM but also establishes a scientific foundation for optimizing processes, controlling microstructures, and enhancing material performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: processing optimization, microstructure evolution and mechanical properties
2. A review on process parameters, microstructure and mechanical properties of additively manufactured AlSi10Mg alloy10.1016/j.matpr.2022.09.100 ↗
3. Improving the comprehensive mechanical property of the AlSi10Mg alloy via parameter adaptation of selective laser melting and heat treatment10.1016/j.jallcom.2024.173623 ↗
4. A review of selective laser melting of aluminum alloys: processing, microstructure, property and developing trends10.1016/j.jmst.2018.09.004 ↗
5. Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder10.1016/j.matdes.2015.08.086 ↗
6. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
7. Strength and strain hardening of a selective laser melted AlSi10Mg alloy10.1016/j.scriptamat.2017.07.025 ↗
8. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
9. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
10. Microstructural and sliding wear behavior of SiC-particle reinforced copper matrix composites fabricated by sintering and sinter-forging processes10.1016/j.jmrt.2015.03.002 ↗
11. A review on the simulation of selective laser melting AlSi10Mg10.1016/j.optlastec.2023.110500 ↗
12. Processing metallic glasses by selective laser melting10.1016/j.mattod.2013.01.018 ↗
13. Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances10.1088/0022-3727/37/14/003 ↗
14. Numerical analysis of the effects of non-conventional laser beam geometries during laser melting of metallic materials10.1088/0022-3727/40/2/039 ↗
15. Numerical modelling of the impact of energy distribution and Marangoni surface tension on track shape in selective laser melting of ceramic material
16. Single scan track analyses on aluminium based powders10.1016/j.jmatprotec.2017.11.055 ↗
17. Alloying AlSi10Mg and Cu powders in laser single scan tracks, melt spinning, and laser powder bed fusion10.1016/j.jallcom.2019.153538 ↗
18. Comprehensive study of the 3D printing of single tracks and cubic samples by selective laser melting of AlSi10MgCu alloy10.1007/s12540-021-01115-2 ↗
19. Effects of the powder, laser parameters and surface conditions on the molten pool formation in the selective laser melting of IN71810.1016/j.jmatprotec.2020.116930 ↗
20. Toward multiscale simulations for solidification microstructure and microsegregation for selective laser melting of nickel-based superalloys
21. Multi-scale simulation of dendrite growth for direct energy deposition of nickel-based superalloys10.1016/j.matdes.2018.107553 ↗
22. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
23. Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting10.1016/j.jmatprotec.2021.117328 ↗
24. On the selective laser melting based additive manufacturing of AlSi10Mg: the process parameter investigation through multiphysics simulation and experimental validation10.1016/j.jallcom.2021.161873 ↗
25. Numerical investigation of thermo-mechanical field during selective laser melting process with experimental validation10.3390/met11071003 ↗
26. Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 606110.1016/j.ijheatmasstransfer.2014.09.014 ↗
27. Modeling of the thermal physical process and study on the reliability of linear energy density for selective laser melting10.1016/j.rinp.2018.03.047 ↗
28. Predicting the porosity defects in selective laser melting (SLM) by molten pool geometry10.1016/j.ijmecsci.2022.107478 ↗
29. Single track formation in selective laser melting of metal powders10.1016/j.jmatprotec.2010.05.010 ↗
30. Numerical simulation of single-pass selective laser melting of Mg-Y-Sm-Zn-Zr alloy
31. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites10.1016/j.optlastec.2016.04.009 ↗
32. A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing10.1016/j.commatsci.2016.07.005 ↗
33. Single track formation in selective laser melting of metal powders10.1016/j.jmatprotec.2010.05.010 ↗
34. Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites10.1016/j.ijmachtools.2015.10.004 ↗
35. Friction behaviour in strip draw test of pre-stretched high strength automotive aluminium alloys10.1016/j.ijmachtools.2013.05.002 ↗
36. Finite element analysis of the effect of volume shrinkage during laser densification10.1016/j.actamat.2005.06.014 ↗
37. Simulation of temperature distribution in single metallic powder layer for laser micro-sintering10.1016/j.commatsci.2011.09.012 ↗
38. Research on heat and mass transfer in the molten pool of laser cladding
39. 3D finite element temperature field modelling for direct laser fabrication10.1007/s00170-008-1785-x ↗
40. Thermofluid field of molten pool and its effects during selective laser melting (SLM) of Inconel 718 alloy
41. Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments10.1088/0022-3727/48/3/035303 ↗
42. Recommended values of thermophysical properties for selected commercial alloy
43. Numerical simulation of laser keyhole welding processes based on control volume methods10.1088/0022-3727/39/21/032 ↗
44. 10.05 - selective laser sintering/melting
45. On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties10.1016/j.jmatprotec.2015.11.016 ↗
46. 2017 · vol. 119
47. Columnar-to-Equiaxed transition in solidification processing of AlSi7 alloys in microgravity the CETSOL project10.4028/www.scientific.net/MSF.790-791.12 ↗