A comparative bio-mechanical performance assessment of additively manufactured bone scaffolds using different beta Ti alloys and Gyroid based cellular structure
Source abstract
Abstract
An exponential rise in demand for artificial implants has emphasized the need for novel biomaterials with good biocompatibility and mechanical properties comparable to human cortical and cancellous bone, to mitigate stress shielding and other post implantation challenges. This study investigated the processing performance of biomedical β-Ti alloys (Ti-12Ta-23Nb-24Zr, Ti-32Nb-25Zr) fabricated via Laser Powder Bed Fusion (L-PBF) under optimal working conditions. These processing conditions included laser power (200 W), scanning speed (1000 mm/s), hatch distance (0.065 mm), layer thickness (40 μm), and exposure time (50 μs). It was found that Ti-12Ta-23Nb-24Zr exhibited the highest compressive strength (864 MPa), near bone elastic modulus (45.2GPa), higher bone regrowth rate (111.6%), minimum process induced porosity (3.681%), and reduced surface roughness (0.462 μm), making it ideal for Orthopedic implants. On the other hand, Ti-32Nb-25Zr also demonstrated good compressive strength (842 MPa), near bone elastic modulus (53 GPa), minimum process induced porosity (4.285%), and good bone regrowth rate (94.7%), suitable for initial bone integration. It was found that beta Ti alloys have improved bio-mechanical performance compared to conventional Ti, in the order Ti-12Ta-23Nb-24Zr>Ti-32Nb-25Zr>Ti-6Al-4V. The findings underscore the adaptability of optimized L-PBF settings across biomedical β-Ti alloys, paving the way for advanced patient-specific orthopedic implants.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy10.1016/j.ijbiomac.2024.129201 ↗
2. Improved mechanical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application10.1016/j.jallcom.2016.07.002 ↗
3. Composites matching the properties of human cortical bones: the design of porous titanium-zirconia (Ti-ZrO2) nanocomposites using polymethyl methacrylate powders10.1016/j.msea.2016.03.066 ↗
4. Selective laser melting of Ti6Al4V alloy: process parameters, defects and post-treatments10.1016/j.jmapro.2021.01.009 ↗
5. Evaluation of biological properties of electron beam melted Ti6Al4V implant with biomimetic coating in vitro and in vivo10.1371/journal.pone.0052049 ↗
6. Fabrication and properties of newly developed Ti35Zr28Nb scaffolds fabricated by powder metallurgy for bone-tissue engineering10.1016/j.jmrt.2019.06.021 ↗
7. Thermal properties of powder beds in energy absorption and heat transfer during additive manufacturing with electron beam10.1016/j.powtec.2020.11.082 ↗
8. Fatigue of double-network hydrogels10.1016/j.engfracmech.2017.10.018 ↗
9. Electron beam melted beta-type Ti-24Nb-4Zr-8Sn porous structures with high strength-to-modulus ratio10.1016/j.jmst.2016.03.020 ↗
10. Microstructures and hardness properties for β-phase Ti-24Nb-4Zr-7.9Sn alloy fabricated by electron beam melting10.1016/j.jmst.2013.08.023 ↗
11. Simultaneous improvement in strength and plasticity of Ti-24Nb-4Zr-8Sn manufactured by selective laser melting10.1016/j.matdes.2018.07.036 ↗
12. Selective laser melting of low-modulus biomedical Ti-24Nb-4Zr-8Sn alloy: effect of laser point distance10.4028/www.scientific.net/KEM.520.226 ↗
13. Resemblance in corrosion behavior of selective laser melted and traditional monolithic β Ti-24Nb-4Zr-8Sn alloy10.1021/acsbiomaterials.8b01341 ↗
14. Microstructure and mechanical properties of additive manufactured porous Ti–33Nb–4Sn scaffolds for orthopaedic applications10.1007/s10856-019-6292-0 ↗
15. The bone tissue compatibility of a new Ti-Nb-Sn alloy with a low Young's modulus10.1016/j.actbio.2011.02.008 ↗
16. Kumar · 2018
17. Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting10.1016/j.actamat.2016.12.052 ↗
18. Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting10.1016/j.actamat.2016.04.029 ↗
19. Recoverable strain in a new biomedical Ti-24Nb-4Zr-8Sn alloy with cellular structure fabricated by electron beam melting10.1080/10667857.2019.1709287 ↗
20. Manufacturability study in laser powder bed fusion of biomedical Ti alloys for orthopedic implants: an investigation of mechanical properties, process-induced porosity and surface roughness10.1108/RPJ-02-2022-0042 ↗
21. Potential assessment in laser powder bed fusion of bionic porous Ti scaffolds concerning compressive behavior, porosity, and surface roughness10.1016/j.jmapro.2023.04.030 ↗
22. A novel methodology for developing dense and porous implants on single generic optimized setting for excellent bio-mechanical characteristics10.1016/j.jmrt.2024.09.209 ↗
23. Parametric optimization in electric wire discharge machining of DC53 steel using gamma phase coated wire10.1007/s12206-020-0609-2 ↗
24. A detailed machinability assessment of DC53 steel for die and mold industry through wire electric discharge machining10.3390/met11050816 ↗
25. 3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability
26. Microstructure and mechanical evolution behavior of LPBF (laser powder bed fusion)-fabricated TA15 alloy10.1016/j.jallcom.2021.159639 ↗
27. Microstructure change and corrosion resistance of selective laser melted Ti-6Al-4V alloy subjected to pneumatic shot peening and ultrasonic shot peening10.1088/2051-672X/ac4c83 ↗
28. Effect of scanning strategy on microstructure and mechanical properties of a biocompatible Ti – 35Nb – 7Zr – 5Ta alloy processed by laser - powder bed fusion10.1557/s43578-021-00422-z ↗
29. Development of low elastic modulus titanium alloys as implant biomaterials10.21926/rpm.2202008 ↗
30. Low-modulus biomedical Ti–30Nb–5Ta–3Zr additively manufactured by Selective Laser Melting and its biocompatibility10.1016/j.msec.2018.11.077 ↗
31. Mechanical behavior and phase transformation of β-type Ti-35Nb-2Ta-3Zr alloy fabricated by 3D-Printing10.1016/j.jallcom.2019.03.138 ↗
32. Selective laser melting of Ti–35Nb composite from elemental powder mixture: microstructure, mechanical behavior and corrosion behavior10.1016/j.msea.2019.06.001 ↗
33. Low-cycle fatigue performance of remelted laser powder bed fusion (L-PBF) biomedical Ti25Ta10.1016/j.msea.2020.140228 ↗
34. Titanium for orthopedic applications: an overview of surface modification to improve biocompatibility and prevent bacterial biofilm formation10.1016/j.isci.2020.101745 ↗
35. Low-modulus biomedical Ti–30Nb–5Ta–3Zr additively manufactured by Selective Laser Melting and its biocompatibility10.1016/j.msec.2018.11.077 ↗
36. Effects of Hf content and immersion time on electrochemical behavior of biomedical Ti-22Nb-xHf alloys in 0.9% NaCI solution10.1002/maco.200805120 ↗
37. 3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain, bioactivity and in-situ bone regeneration capability
38. Corrosion and wear behavior of Ti–5Cu-xNb biomedical alloy in simulated body fluid for dental implant applications10.1016/j.jmbbm.2022.105533 ↗
39. Additively manufactured biomedical Ti-Nb-Ta-Zr lattices with tunable Young’s modulus: Mechanical property, biocompatibility, and proteomics analysis10.1016/j.msec.2020.110903 ↗
40. Influence of tantalum addition on the corrosion passivation of titanium-zirconium alloy in simulated body fluid10.3390/ma15248812 ↗
41. Heat treatment and mechanical properties of powder metallurgy processed Ti–35.5Nb–5.7Ta beta-titanium alloy10.1016/j.matchar.2013.08.006 ↗
42. Processing a biocompatible Ti-35Nb-7Zr-5Ta alloy by selective laser melting10.1557/jmr.2020.90 ↗
43. A novel method for the molten pool and porosity formation modelling in selective laser melting10.1016/j.ijheatmasstransfer.2019.06.038 ↗
44. Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner10.1088/1758-5082/6/4/045007 ↗
45. Optimization and comparison of porosity rate measurement methods of Selective Laser Melted metallic parts
46. Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy10.1016/j.mtla.2020.100941 ↗
47. Oligocrystalline microstructure in an additively manufactured biocompatible Ti-Nb-Zr-Ta alloy
48. In vitro and in vivo biocompatibility of Ti-6Al-4V titanium alloy and UHMWPE polymer for total hip replacement10.7603/s40730-016-0014-8 ↗
49. Prediction of mechanical properties of cortical bone by quantitative computed tomography10.1016/j.medengphy.2007.04.008 ↗