journal article·2025-03Open access

The dynamic recrystallization microstructure characterizations of hot-rolled Fe50Mn30Co10Cr10 high-entropy alloy during different cooling rates

Jinchen Yang, Xiaoyang Zhang, Xiaolan Kang, Huanqing Li, Hua Hou, Ling Yang, Yuhong Zhao

Abstract

This study investigated the dynamic recrystallization microstructure and recrystallization mechanisms of hot-rolled Fe 50 Mn 30 Co 10 Cr 10 high-entropy alloy (HEA) combining the microstructural characterization and the phase-field-crystal (PFC) simulations. For this purpose, hot rolling at 800°C with 50% thickness reduction was carried out after cold rolling. The samples were cooled using two different methods: air cooling and water quenching. Microstructural characterization was conducted using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Dynamic recrystallized grains were identified as grains with a grain orientation spread (GOS) value less than 2.2°. The results indicate that under different cooling rates, the occurrence of martensitic phase transformation was almost completely suppressed due to the small grain size. Furthermore, continuous dynamic recrystallization (CDRX) was the predominant DRX mechanism, while discontinuous dynamic recrystallization (DDRX) played a supplementary role in the dynamic recrystallization process. As the cooling rate increased, the proportion of CDRX also increased. The result of this work not only elaborate cooling have an effect on the dynamic recrystallization mechanism, but provide a conference for optimizing microstructure and mechanical properties through thermomechanical process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and Outcomes10.1002/adem.200300567 ↗
3. A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength10.1126/sciadv.aat8712 ↗
4. Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures10.1016/j.msea.2019.05.057 ↗
5. Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys10.1016/j.intermet.2015.03.013 ↗
6. Microstructure and corrosion behavior of FeCrNiCoMn (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M HSOx2410.1016/j.corsci.2021.109694 ↗
7. Comparative corrosion behavior of Fe50Mn30Co10Cr10 dual-phase high-entropy alloy and CoCrFeMnNi high-entropy alloy in 3.5 wt% NaCl solution10.1016/j.jallcom.2020.155824 ↗
8. A cost-effective Fe-rich compositionally complicated alloy with superior high-temperature oxidation resistance10.1016/j.corsci.2020.109190 ↗
9. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
10. Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems10.1016/j.actamat.2014.04.033 ↗
11. Bidirectional transformation enables hierarchical nanolaminate dual-phase high-entropy alloys10.1002/adma.201804727 ↗
12. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
13. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
14. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
15. Grain size-dependent phase-specific deformation mechanisms of the Fe50Mn30Co10Cr10 high entropy alloy10.1016/j.msea.2022.143867 ↗
16. Microstructure investigations of Fe50Mn30Co10Cr10 dual–phase high–entropy alloy under Fe ions irradiation10.1016/j.jnucmat.2021.153006 ↗
17. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
18. Microstructural evolution and dynamic recrystallization in Fe50Mn30Co10Cr10 medium entropy alloy under hot compression10.1016/j.jmrt.2024.05.108 ↗
19. Cryo-rolling and annealing-mediated phase transformation in Al5Ti2.5Fe25Cr25Ni42.5 high-entropy alloy: experimental, phase-field and CALPHAD investigation
20. Coalescence of Al0.3CoCrFeNi polycrystalline high-entropy alloy in hot-pressed sintering: a molecular dynamics and phase-field study10.1038/s41524-023-01139-9 ↗
21. Effects of mixing enthalpy and cooling rate on phase formation of AlxCoCrCuFeNi high-entropy alloys10.1016/j.mtla.2019.100292 ↗
22. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
23. Phase-field crystal modeling and classical density functional theory of freezing10.1103/PhysRevB.75.064107 ↗
24. Phase-field crystal simulation of evolution of liquid pools in grain boundary pre-melting regions10.1016/S1003-6326(21)65570-X ↗
25. An efficient algorithm for solving the phase field crystal model10.1016/j.jcp.2008.03.012 ↗
26. De-twinning via secondary twinning in face-centered cubic alloys10.1016/j.msea.2013.04.075 ↗
27. Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure10.1016/j.actamat.2011.08.031 ↗
28. Formation of annealing twins in f.c.c. crystals10.1016/S1359-6454(96)00336-9 ↗
29. Effects of reversion and recrystallization on microstructure and mechanical properties of Nb-alloyed low-Ni high-Mn austenitic stainless steels10.1016/j.msea.2016.01.093 ↗
30. The role of annealing twins during recrystallization of Cu10.1016/j.actamat.2007.03.021 ↗
31. Discontinuous dynamic recrystallization in α-Zr10.1016/j.msea.2018.01.117 ↗
32. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy10.1016/j.matchar.2021.110976 ↗
33. Evolution of recrystallization texture in medium to low stacking fault energy alloys: experiments and simulations10.1016/j.ijplas.2023.103827 ↗
34. Deformation behavior and dynamic recrystallization mechanism of a novel high Nb containing TiAl alloy in (α + γ) dual-phase field10.1016/j.jallcom.2023.169250 ↗
35. Dynamic recrystallization of the constituent γ phase and mechanical properties of Ti-43Al-9V-0.2Y alloy sheet10.3390/ma10091089 ↗
36. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
37. Temperature dependence of stacking fault energy in close-packed metals and alloys10.1016/0025-5416(78)90194-5 ↗
38. The effect of strain rate on mechanical properties and microstructure of a metastable FeMnCoCr high entropy alloy10.1016/j.msea.2020.138982 ↗
39. Towards stacking fault energy engineering in FCC high entropy alloys10.1016/j.actamat.2021.117472 ↗
40. Experimental and computational analysis of stacking fault energy in B-doped Fe50−XMn30Co10Cr10BX multi-principal elements alloys10.1016/j.jallcom.2023.172428 ↗
41. A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys
42. From classical thermodynamics to phase-field method10.1016/j.pmatsci.2021.100868 ↗
43. Development of phase-field modeling in materials science in China: a review10.1007/s40195-023-01593-w ↗
44. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition10.1126/sciadv.abf3039 ↗
45. Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing10.1016/j.actamat.2022.118248 ↗
46. Dual influences of deformation-induced W precipitates on dynamic recrystallization and fracture mechanism of the hot-extruded Mg-Y-Zn alloys: an experimental and phase field study10.1016/j.ijplas.2023.103772 ↗
47. Understanding and design of metallic alloys guided by phase-field simulations10.1038/s41524-023-01038-z ↗
48. Applications of unified phase-field methods to designing microstructures and mechanical properties of alloys10.1557/s43577-024-00720-x ↗
49. Integrated unified phase-field modeling (UPFM)10.1002/mgea.44 ↗
50. Hot deformation characteristics and dynamic recrystallization of the MoNbHfZrTi refractory high-entropy alloy10.1016/j.msea.2015.10.113 ↗
51. Deformation-induced dynamic precipitation of 14H-LPSO structure and its effect on dynamic recrystallization in hot-extruded Mg-Y-Zn alloys10.1016/j.ijplas.2023.103573 ↗
52. Nucleation and microtexture development under dynamic recrystallization of copper10.1016/S0921-5093(01)01336-3 ↗
53. Role of twinning on dynamic recrystallization and microstructure during moderate to high strain rate hot deformation of a Ti-modified austenitic stainless steel10.1007/s11661-011-1012-5 ↗
54. Nucleation mechanisms of dynamic recrystallization in austenitic steel alloy 800H10.1016/S1359-6462(98)00124-9 ↗
55. An investigation of dynamic recrystallisation on Cu–Sn bronze using 3D EBSD10.1179/026708309X12547309760966 ↗
56. Dynamic recrystallization in Monel 400 Ni-Cu alloy: mechanism and role of twinning10.1016/j.msea.2018.12.045 ↗
57. On the grain boundary character evolution in non equiatomic high entropy alloy during hot rolling induced dynamic recrystallization10.1016/j.jallcom.2022.166126 ↗
58. EBSD study of a hot deformed nickel-based superalloy10.1016/j.jallcom.2015.04.008 ↗
59. Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K10.1016/j.actamat.2014.09.023 ↗
60. The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite10.1016/j.jallcom.2019.07.105 ↗
61. Hall–Petch relationship and dislocation model for deformation of ultrafine-grained and nanocrystalline metals10.2320/matertrans.MA201310 ↗
62. Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy10.1016/j.matchar.2015.09.027 ↗
63. Meyers · 1984
64. Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy10.1016/j.jallcom.2019.04.291 ↗
65. Cryogenic mechanical behavior of a TRIP-assisted dual-phase high-entropy alloy10.1007/s12274-021-3719-y ↗
66. Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V10.1016/j.msea.2014.07.086 ↗
67. Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties10.1016/j.matdes.2019.107811 ↗