journal article·2024-03Open access

Effect of laser-textured substrate on adhesion and microstructure of deposited Mo–NiCrBSiCFe coating

Delong Jia, Dong Zhou, Peng Yi, Shengyue Zhang, Xianghua Zhan, Yancong Liu

Abstract

The novel application of laser surface texture as a method for enhancing the deposition of coatings on substrates has garnered significant interest. This study focuses on the use of atmospheric plasma-sprayed Mo–NiCrBSiCFe coating, which was applied to both laser surface textured and grit-blasted AISI 304 substrates. The coating powder was created by mechanically milling a mixture of 25 % molybdenum and 75 % NiCrBSiCFe powders, providing a unique combination of materials for the deposition coating. The analysis zeroed in on examining the effects of laser texture grooves on the microstructure, porosity, microhardness, and adhesion strength of the composite coating. The findings revealed that the composite coating primarily comprises MoO2, Mo, and Ni phases. In comparison to the grit-blasted substrate, the coating applied on the laser-textured groove substrate exhibited a porosity increase of 15.15 %, a pore size rise of 17.45 %, a notable 45.62 % improvement in adhesion strength, and a significant 23.57 % enhancement in scratch resistance. Furthermore, the coating on the laser-textured substrate exhibited fewer closed pores. The microhardness of the coating surface was higher than that of the coating cross-section within the grooves. Notably, the laser surface texture had a significant impact on the adhesion strength, microstructure, and hardness of the composite coating, surpassing the results achieved through traditional grit blasting. One novel observation from this study is that laser surface texturing can have a significant impact on the porosity of Mo–NiCrBSiCFe coatings. Another noteworthy finding is that laser surface texturing can enhance the hardness of Mo–NiCrBSiCFe coatings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Effect of powder particle size on wear resistance of plasma sprayed molybdenum coating
2. Role of Mo on tribological properties of atmospheric plasma-sprayed Mo-NiCrBSi composite coatings under dry and oil-lubricated conditions10.1016/j.jallcom.2017.08.195 ↗
3. Shot peening and grit blasting-effects on surface iontegrity, ABC
4. Laser surface texturing (LST) treatment before thermal spraying: a new process to improve the substrate-coating adherence10.1016/j.surfcoat.2010.07.044 ↗
5. Laser surface patterning to enhance adhesion of plasma sprayed coatings10.1016/j.surfcoat.2015.07.022 ↗
6. Role of powder granulometry and substrate topography in adhesion strength of thermal spray coatings10.1007/s11666-016-0411-y ↗
7. Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface10.1007/s00339-016-0124-6 ↗
8. Investigation of sprayed particle filling qualities within the texture on the bonding behavior of Ni-based coating10.1016/j.surfcoat.2017.09.079 ↗
9. Efficient photocathodic protection of nanoflower MgIn2S4-modified CNNs composites on 316 SS under visible light
10. Modification of the roughness of 304 stainless steel by laser surface texturing (LST)10.1088/1555-6611/acbb76 ↗
11. The behavior of plasma sprayed thermal barrier coating with laser microtextured bond coat under high temperature testing10.1016/j.surfcoat.2022.129095 ↗
12. As-sprayed highly crystalline Yb2Si2O7 environmental barrier coatings (EBCs) by atmospheric plasma spray (APS)10.1007/s11666-022-01526-6 ↗
13. Erosion resistance enhancement of polymeric composites with air plasma sprayed coatings10.1016/j.surfcoat.2022.129211 ↗
14. Microstructure and wear resistance of plasma-sprayed molybdenum coating reinforced by MoSi2 particles10.1007/s11666-016-0440-6 ↗
15. Microstructure and mechanical properties of supersonic plasma sprayed Mo-based coating reinforced by Re10.1016/j.surfcoat.2019.124966 ↗
16. Development of process maps for plasma spray: case study for molybdenum10.1016/S0921-5093(02)00642-1 ↗
17. Grain morphology of molybdenum splats plasma-sprayed on glass substrates10.1016/S0921-5093(00)01397-6 ↗
18. The effect of Mo content in plasma-sprayed Mo-NiCrBSi coating on the tribological behavior10.1016/j.surfcoat.2010.07.017 ↗
19. Improvement of wear resistance of plasma-sprayed molybdenum blend coatings10.1361/10599630523827 ↗
20. Friction and wear properties of Mo coatings on cast-iron substrates10.1016/S0257-8972(03)00468-7 ↗
21. Mo-alloyed stainless steel coating with improved cavitation erosion resistance by plasma spraying a specially designed core-shell-structured powder
22. Creep of high-strength steel coated with plasma sprayed self-fluxing alloy10.3390/met13040763 ↗
23. Correlation of microstructure and wear resistance of molybdenum blend coatings fabricated by atmospheric plasma spraying10.1016/j.msea.2003.09.062 ↗
24. Tribological behaviour of plasma sprayed diamond reinforced molybdenum coatings10.1016/j.ijrmhm.2018.10.015 ↗
25. High-temperature tribological properties of NiCrBSiCFe plasma-sprayed coating on austenitic stainless steel substrate10.1016/j.jallcom.2010.06.149 ↗
26. Effect of plasma spraying parameter on wear resistance of NiCrBSiCFe plasma coatings on austenitic stainless steel at elevated temperatures at various loads10.1016/j.matdes.2011.10.051 ↗
27. Automatic remelting and enhanced mechanical performance of a plasma sprayed NiCrBSi coating10.1016/j.surfcoat.2019.04.052 ↗
28. Effect of flame remelting on microstructure and wear behaviour of plasma sprayed NiCrBSi-30%Mo coating10.1080/02670844.2016.1226053 ↗
29. Correlation of microstructure with tribological properties in atmospheric plasma sprayed Mo-added ferrous coating10.1016/j.surfcoat.2016.09.074 ↗
30. Wan · 1999 · August · 2
31. Comparison of oxidation behavior of Ni-20Cr alloy and Ni-base self-fluxing alloy during air plasma spraying10.1016/j.surfcoat.2009.06.036 ↗
32. Reactions between Ni-Cr-B-Si matrixes and carbide additives in coating during fusion treatment10.1016/0040-6090(81)90639-8 ↗
33. The effect of spraying distance on wear resistance of molybdenum coatings10.1016/S0043-1648(01)00842-0 ↗
34. Effect of vacuum hot pressing on plasma-sprayed molybdenum coatings on rail vehicle axle steel10.1007/s11666-019-00862-4 ↗
35. Time-dependent friction response of plasma-sprayed molybdenum10.1016/S0043-1648(98)00395-0 ↗
36. Substrate melting and Re-solidification during impact of high-melting point droplet material10.1007/s11666-015-0326-z ↗
37. Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections10.1016/j.triboint.2011.04.002 ↗
38. Substrate melting during thermal spray splat quenching10.1016/j.tsf.2004.05.073 ↗
39. An effective approach for creating metallurgical self-bonding in plasma-spraying of NiCr-Mo coating by designing shell-core-structured powders10.1016/j.actamat.2016.03.020 ↗
40. Properties of NiCrBSi coating, as sprayed and remelted by different technologies10.1016/j.surfcoat.2014.05.009 ↗
41. Understanding the formation of plasma-sprayed Ni20Cr splats through interface observation10.1016/j.apsusc.2018.11.087 ↗
42. Effect of lasertextured groove wall interface on molybdenum coating diffusion and metallurgical bonding10.1016/j.surfcoat.2020.126561 ↗
43. Splat deposition stress formation mechanism of droplets impacting onto texture