journal article·2024-05Open access

The microstructure and properties of Mo0.5NbTiZrTax high entropy alloys enhanced by Ta addition

Qi Gao, Siyang Guo, Tao Peng, Feiyu Ge, Haoming Yuan, Qingfeng Guan, HaiXia Liu, Shun Guo, Guanglei Liu, Xinlin Liu, Peng Lyu

Abstract

In this study, the Mo0.5NbTiZrTax (x = 0.3, 0.5, 0.7) HEAs obtained by arc melting were controlled by the change of Ta content. The microstructure, the wear properties, and the corrosion resistance of the alloys were studied systematically. The results revealed that the alloys have the BCC (major) phase + BCC (minor) phase structure. At the same time, the increase in Ta content promotes the refinement of grains and the formation of sub-grains with gradually random orientation at grain boundaries but suppresses the randomization of crystal orientation. This also enriched the defect structure inside the alloys, further induced the formation of Zr-rich second phase particles, high-density stacking fault structures, and disordered Zr-rich BCC phases. The increase in Ta content significantly improved the wear properties of the alloys, which is mainly ascribed to the presence of the tough BCC phase and the combined effects of solid solution strengthening, second phase strengthening, fine grain strengthening, lattice distortion effect, and stacking fault strengthening. The electrochemical measurements confirm that the overall corrosion resistance of the alloys shows a trend of first increasing and then decreasing with the increase of Ta content due to the formation of micro batteries between the second phase rich in Zr as the anode and dendrites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Domestic and foreign marine titanium alloy and its application
2. Phase inversion in a two-phase, BCC+ B2, refractory high entropy alloy10.1016/j.actamat.2019.12.004 ↗
3. Research and application progress of high-entropy alloys10.3390/coatings13111916 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. Recent progress in high entropy alloy research10.1007/s11837-017-2484-6 ↗
6. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
7. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
8. Development and exploration of refractory high entropy alloys—a review10.1557/jmr.2018.153 ↗
9. Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature
10. Effect of tantalum content on mechanical and corrosion behavior of TI-6Al-3Nb-2Zr-1Mo-xTa alloys
11. Effect of interstitial oxygen/nitrogen on mechanical and wear properties of TiZrHfNb refractory high-entropy alloy10.1016/j.jallcom.2023.170863 ↗
12. Tribological performance of a TiZrNbMo0.6 refractory high entropy alloy at elevated temperatures10.1016/j.jallcom.2022.165915 ↗
13. The determining role of Al addition on tribology properties and oxidation behavior at elevated temperatures of TiZrHfNb refractory high-entropy alloy10.1016/j.matchar.2022.111921 ↗
14. Mechanical and tribological performance of AlCr0.5NbTaTi4–x (x = 0, 0.5, 1) refractory high-entropy alloys10.1016/j.jmst.2023.02.016 ↗
15. Effects of heat treatment on microstructure and mechanical properties of TiNbZrMo alloy
16. Surface modification of CrFeCoNiMo high entropy alloy induced by high-current pulsed electron beam10.1016/j.apsusc.2019.144453 ↗
17. Biocompatible high entropy alloys with excellent degradation resistance in a simulated physiological environment10.1021/acsabm.0c01181 ↗
18. Phase decomposition behavior and its effects on mechanical properties of TiNbTa0.5ZrAl0.5 refractory high entropy alloy10.1016/j.jmst.2020.05.038 ↗
19. The effect of high current pulsed electron beam irradiation on microstructure and properties Cu-Fe powder metallurgical alloys10.1088/2053-1591/ab5514 ↗
20. Microstructure and properties of CoCrFeNiAlx (x = 0.1, 0.5, 1) high-entropy alloys enhanced by laser surface remelting10.1016/j.matchar.2021.111717 ↗
21. Phase transformations of HfNbTaTiZr high-entropy alloy at intermediate temperatures10.1016/j.scriptamat.2018.08.032 ↗
22. Microstructural stability and aging behavior of refractory high entropy alloys at intermediate temperatures10.1016/j.jmst.2021.12.057 ↗
23. Seaweed eutectic-dendritic solidification pattern in a CoCrFeNiMnPd eutectic high-entropy alloy10.1016/j.intermet.2017.02.004 ↗
24. WEDM machining of MoNbTaTiZr refractory high entropy alloy10.1016/j.cirpj.2022.05.021 ↗
25. Bonding theory for metals & alloys10.1016/B978-044451978-8/50003-9 ↗
26. The influence of grain boundaries on the nucleation of secondary phases10.1016/0001-6160(55)90014-6 ↗
27. Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy10.1016/j.matdes.2015.05.019 ↗
28. Microstructure and hardness of NbTiZr and NbTaTiZr refractory medium-entropy alloy coatings on Zr alloy by laser cladding10.1016/j.apsusc.2021.149338 ↗
29. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
30. Microstructure and properties of CoCrFeNiMo0. 2 high-entropy alloy enhanced by high-current pulsed electron beam10.1016/j.surfcoat.2021.126911 ↗
31. Potential TRIP/TWIP coupled effects in equiatomic CrCoNi medium-entropy alloy10.1016/j.actamat.2022.118049 ↗
32. Temperature-dependent tensile behavior of the HfNbTaTiZr multi-principal element alloy10.1016/j.actamat.2022.118618 ↗
33. Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
34. Effect of trace boron on microstructural evolution and high temperature creep performance in Re-contianing single crystal superalloys10.1016/j.pnsc.2020.05.003 ↗
35. Tribological behavior of a TiAl matrix composite containing 10 wt% Ag investigated at four wear stages10.1039/C5RA13066B ↗
36. Effect of Ta addition on hardness and wear resist of Cu-Al-Ni shape memory alloy fabricated by powder metallurgy [C]//2013 IEEE Business Engineering and Industrial Applications Colloquium (BEIAC)
37. Effect of Al content on microstructure and wear properties of FeCrNiMnAlx high-entropy alloys10.1088/2053-1591/ac5a9c ↗
38. Microstructure and wear resistance of laser cladded Ni-Cr-Co-Ti-V high-entropy alloy coating after laser remelting processing10.1016/j.optlastec.2017.09.012 ↗
39. High temperature wear behavior of refractory high entropy alloys based on 4-5-6 elemental palette10.1016/j.jallcom.2020.156004 ↗
40. Microstructure and properties of TiNbZrMo high entropy alloy coating10.1016/j.matlet.2020.129004 ↗
41. Influence of inclusions on initiation of pitting corrosion and stress corrosion cracking of X70 steel in near-neutral pH environment10.1016/j.corsci.2018.11.007 ↗
42. Improving the corrosion resistance of MgZn1.2GdxZr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions10.1016/j.corsci.2020.108962 ↗
43. A comparative study of electrochemical corrosion behavior in Laser and TIG welded Ti–5Al–2.5Sn alloy10.1016/j.jmrt.2017.09.006 ↗
44. Corrosion-Resistant high-entropy alloys: a review10.3390/met7020043 ↗
45. Corrosion resistant nanostructured eutectic high entropy alloy10.1016/j.corsci.2019.108315 ↗
46. Microstructure, wear and corrosion behavior of high-entropy alloy coatings: the concentration of Mo element and the dual effect of σ-CrMo phase10.1016/j.surfcoat.2023.129726 ↗
47. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments10.1016/j.corsci.2010.04.004 ↗
48. Role of Ta in improving corrosion resistance of titanium alloys under highly reducing condition10.1016/j.jmrt.2023.02.158 ↗