journal article·2025-01Open access

Study on stress corrosion behavior and failure mechanism of galvanized bolts in complex coal mine environments

Zhe He, Nong Zhang, Zhengzheng Xie, Chao Ma, Changliang Han, Fan Zhang, Huiqing Wang, Saad S. Alarifi

Abstract

The premature failure of bolts caused by stress corrosion cracking (SCC) is a common issue in the global mining industry. Studies have shown that hot-dip galvanizing is an effective solution, but the first widespread application of galvanized bolts in Xin’Shang’Hai No. 1 coal mine, China, experienced extensive failures. To thoroughly investigate the fracture failure mechanism, this paper employed a comprehensive approach that included macro mechanical property testing, corrosion experiments, and micro-scale characterization. The findings indicate that significant stress concentration occurred on the surface threads of the bolts under high mine pressure, serving as the primary inducer of SCC in the bolts. Under long-term stress corrosion conditions, the peak strength of high-strength coated bolts, hot-dip galvanized bolts, and ordinary bolts decreased by 3.73%, 20.54%, and 11.60% respectively. Among them, the coated bolts largely maintained their original mechanical properties and had the best anti-corrosion capability. The performance of galvanized bolts deteriorated more than ordinary ones, indicating that they could not suppress the SCC of the bolts and even exacerbated the SCC of the bolt body after the galvanized layer cracked. Hydrogen content analysis showed that after service in the mine, the hydrogen content in the body of the galvanized bolts increased by 304.48%, significantly raising the risk of hydrogen induced cracking (HIC). Additionally, HIC-sensitive structures (tempered martensite) and typical features of HIC (white spots) were found in the galvanized bolts, providing strong evidence of HIC occurrence during their service in the mine. In short, the instantaneous fracture of galvanized bolts was mainly caused by the interaction of stress concentration cracking due to the geometry of the bolts and HIC under stress corrosion failure. Thus, in deep underground engineering, it is not recommended to promote the use of galvanized anti-corrosion processes and Class A shaped bolts, especially in environments with high stress and high mineralization. Instead, high-strength coated bolts are advised to replace galvanized ones to enhance the reliability and safety of bolt support.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Practices, experience, and lessons learned based on field observations of support failures in some Chinese coal mines10.1016/j.ijrmms.2019.104097 ↗
2. Field and numerical investigation on roof failure and fracture control of thick coal seam roadway10.1016/j.engfailanal.2021.105594 ↗
3. Research on spatiotemporal evolution law of surrounding rock fractures and hierarchical collaborative control technology in high-stress soft rock roadway: a case study10.1016/j.engfailanal.2023.107366 ↗
4. Comparative susceptibility to corrosion of coated expandable bolts10.1007/s00603-019-1737-9 ↗
5. Corrosion level of rock bolts exposed to aggressive environments in nordic road tunnels10.1007/s00603-021-02547-3 ↗
6. Enhancing the SCC resistance of the anchor steel with microalloying in a simulated mine environment10.3390/ma16175965 ↗
7. Microbiologically influenced corrosion of cable bolts in underground coal mines: the effect of Acidithiobacillus ferrooxidans10.1016/j.ijmst.2021.01.006 ↗
8. Stress corrosion cracking of rockbolts: an in-situ testing approach10.1016/j.conbuildmat.2020.121275 ↗
9. Development of a Cr-Ni-Mo alloyed stress corrosion-resistant anchor bolt steel10.1108/ACMM-08-2023-2873 ↗
10. Liu · 2017
11. Examination of rockbolt stress corrosion cracking utilising full size rockbolts in a controlled mine environment10.1016/j.ijrmms.2015.11.007 ↗
12. Rock bolt corrosion–an experimental study10.1179/1743286314Y.0000000060 ↗
13. Corrosion of high-strength steel wires under tensile stress10.3390/ma13214790 ↗
14. Metallurgical aspects of rock bolt stress corrosion cracking10.1016/j.msea.2007.11.086 ↗
15. Investigation into durability degradation and fracture of cable bolts through laboratorial tests and hydrogeochemical modelling in underground conditions10.1016/j.tust.2023.105198 ↗
16. Mechanical characteristics and field application of flexible bolt under long-term load
17. Laboratory and field testing of bolting systems subjected to highly corrosive environments10.1016/j.ijmst.2016.11.017 ↗
18. Development and evaluation of corrosion resistant coating for expandable rock bolt against highly corrosive ground conditions10.1016/j.ijmst.2017.12.023 ↗
19. Seventy years development and prospects of strata control technologies for coal mine roadways in China
20. Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment10.1016/j.conbuildmat.2020.121921 ↗
21. Corrosion behavior of steel reinforcement bars embedded in concrete exposed to chlorides: effect of surface finish10.1016/j.conbuildmat.2017.04.186 ↗
22. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires10.1016/j.corsci.2017.12.014 ↗
23. Environmental influence on mesh corrosion in underground coal mines10.1080/17480930.2017.1299604 ↗
24. Investigation of cable bolts for stress corrosion cracking failure10.1016/j.conbuildmat.2018.08.066 ↗
25. A case study on the deformation and failure mechanism of a soft rock mining roadway in the Xin'Shang’Hai No. 1 coal mine, China10.1016/j.engfailanal.2023.107136 ↗
26. Experimental investigation on the mixture optimization and failure mechanism of cemented backfill with coal gangue and fly ash10.1016/j.powtec.2024.119751 ↗
27. Fracture characteristics in rock bolts in underground coal mine roadways10.1016/j.ijrmms.2013.04.006 ↗
28. Study on the durability of steel wire under the coupling effects of harsh environment and variable loads
29. Mineralogically influenced stress corrosion cracking of rockbolts and cable bolts in underground mines10.1016/j.ijrmms.2019.04.011 ↗
30. Laboratory-Based investigation into stress corrosion cracking of cable bolts10.3390/ma12132146 ↗
31. Stress corrosion cracking fracture mechanisms in rock bolts10.1023/A:1025996620197 ↗
32. Stress corrosion cracking of cable bolts in tunnels: an in-situ testing approach10.1016/j.tust.2022.104421 ↗
33. The effect of carbon on hydrogen embrittlement in stable Cr-Ni-Mn-N austenitic stainless steels10.1016/j.corsci.2017.05.004 ↗
34. Early corrosion behavior of 35CrMo steel for high-strength bolt in simulated shallow and deep sea environments10.1016/j.jmrt.2023.12.080 ↗
35. Cheng · 2021
36. Evolution of corrosion degradation in galvanised steel bolts exposed to a tropical marine environment10.1016/j.jmrt.2023.10.295 ↗
37. Composition and protective ability of rust layer formed on weathering steel exposed to various environments10.1016/j.corsci.2005.10.004 ↗
38. Atmospheric corrosion performance of structural steel bolts in the Wenchang marine environment, South China10.1016/j.engfailanal.2023.107352 ↗
39. Evaluation of energy accumulation, strain burst potential and stability of rock mass during underground extraction of a highly stressed coal seam under massive strata-a field study10.1016/j.enggeo.2023.107178 ↗
40. Corrosion behavior of rockbolts in simulated underground mining solutions using macro-scale and micro-scale electrochemical measurements10.1007/s11665-021-05612-8 ↗
41. Deterioration of mechanical properties at the anchor-mortar interface considering the effect of two-phase corrosion10.1016/j.conbuildmat.2023.130664 ↗
42. Stress corrosion cracking failure analysis of AISI 1018 carbon steel reinforcing bars in carbonated and chloride contaminated environment10.1016/j.engfailanal.2023.107159 ↗
43. Classification of aqueous corrosion in underground mines10.1007/s00603-016-0926-z ↗
44. Craig · 2020
45. In-service failure of mechanically galvanised low alloy steel bolts of three 25,000 m3 bolted water tanks
46. Research on the connection performance of variable pitch of screw threaded casing based on 3D finite element simulation model10.4028/www.scientific.net/AMM.215-216.1105 ↗
47. Ren S, Wu J, Li J. Relationship Study between Bolt Shape and Anchor Performance. Appl Mech Mater 204;670:1050–1054. https://doi.org/10.4028/www.scientific.net/AMM.670-671.1050.10.4028/www.scientific.net/AMM.670-671.1050 ↗
48. Experimental study on degradation behaviors of rock bolt under the coupled effect of stress and corrosion10.1016/j.conbuildmat.2019.03.335 ↗
49. Mechanical behaviors of coal measures and ground control technologies for China's deep coal mines - a review10.1016/j.jrmge.2022.11.004 ↗
50. Behavior and evaluation of stress corrosion cracking of typical anchor bolt steel in simulated crevice environment10.1016/j.jmrt.2023.07.149 ↗
51. Quenching power of aqueous salt solution10.1016/j.ijheatmasstransfer.2019.06.036 ↗
52. Hydrogen effect against hydrogen embrittlement10.1007/s11661-010-0275-6 ↗
53. An experimental framework for simulating stress corrosion cracking in cable bolts10.1016/j.tust.2018.03.004 ↗
54. Investigation into hydrogen induced fracture of cable bolts under deep stress corrosion coupling conditions10.1016/j.tust.2024.105729 ↗
55. Exploring hydrogen embrittlement: mechanisms, consequences, and advances in metal science10.3390/en17122972 ↗
56. Effects of different cooling rates on the microstructure, crystallographic features, and hydrogen induced cracking of API X80 pipeline steel10.1016/j.jmrt.2021.07.060 ↗