journal article·2025-03Open access

A physically-based constitutive model considering mixed dynamic recrystallization for a near-α titanium alloy during hot deformation

Jie Zhao, Yingming Tu, Binjun Zhou, Kehuan Wang, Gang Liu

Abstract

The mixed dynamic recrystallization of titanium alloys during hot deformation is rarely described in the existing microstructure evolution models and constitutive models. In this paper, the mechanism of mixed dynamic recrystallization of a near-α titanium alloy rolled sheet during hot tension was analyzed. The used TA15 rolled sheet is mainly composed of equiaxed grains with a lot of deformed structure, which promotes dynamic recrystallization during hot deformation. Continuous dynamic recrystallization is the predominant mechanism of microstructure evolution in the deformation region with the ln Z of about 47.5 and true strain of about 0.3. With the decrease of parameter Z , discontinuous dynamic recrystallization is enhanced. Then a physically-based constitutive model was developed, considering subgrain rotation, recrystallization nucleation, recrystallization grain growth, recrystallization grain transformation into deformation structure and microvoids evolution. The model can well describe the two kinds of mixed dynamic recrystallization: continuous dynamic recrystallization and discontinuous dynamic recrystallization occur successively and simultaneously. Based on the developed model, the process window of hot forming for TA15 titanium alloy components is established, realizing grain size reduction of 20 % and no necking.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Flow behavior and dynamic recrystallization mechanism of a new near-alpha titanium alloy Ti-0.3Mo-0.8Ni-2Al-1.5Zr10.1016/j.jmrt.2024.04.076 ↗
2. Mechanical behaviour and microstructural evolution of Ti-6Al-1Mo-1V-2Zr-2Cr-1Fe alloy subjected to hot compression deformation10.1016/j.jmrt.2023.10.086 ↗
3. The microstructural morphology of transformed α induced by <111> β fiber texture in a dissimilar inertia friction weld between near-α and α plus β titanium alloys10.1016/j.jmrt.2024.02.031 ↗
4. Effect of heat treatment on microstructures and properties of vacuum laser welding Ti-6Al-4V titanium alloy10.1016/j.jmrt.2024.04.265 ↗
5. Microstructure and damage based constitutive modelling of hot deformation of titanium alloys10.1016/j.jallcom.2020.154851 ↗
6. A novel simulation of continuous dynamic recrystallization process for 2219 aluminium alloy using cellular automata technique10.1016/j.msea.2021.141256 ↗
7. Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys10.1016/j.ijplas.2020.102773 ↗
8. A novel simulation of continuous dynamic recrystallization process for 2219 aluminium alloy using cellular automata technique10.1016/j.msea.2021.141256 ↗
9. Full field modeling of dynamic recrystallization in a CPFEM context - application to 304L steel
10. Incorporating dynamic recrystallization into a crystal plasticity model for high-temperature deformation of Ti-6Al-4V10.1016/j.msea.2023.145211 ↗
11. Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA575410.1016/j.ijmachtools.2014.07.008 ↗
12. Superplasticity in Ti-6Al-4V: characterisation, modelling and applications10.1016/j.actamat.2015.04.056 ↗
13. A unified internal state variable material model for Ti2AlNb-alloy and its applications in hot gas forming10.1016/j.ijmecsci.2019.105126 ↗
14. Physically-based constitutive models for hot gas pressure forming of laser-welded titanium alloy blank10.1016/j.jmapro.2022.08.021 ↗
15. Experimental investigations and constitutive modeling of the dynamic recrystallization behavior of Inconel 740 superalloy10.1016/j.msea.2020.139939 ↗
16. A physically based elasto-viscoplastic constitutive model for modeling the hot deformation and microstructure evolution of a near α Ti alloy10.1016/j.msea.2023.144994 ↗
17. Study on the mixed dynamic recrystallization mechanism during the globularization process of laser-welded TA15 Ti-alloy joint under hot tensile deformation10.1016/j.matchar.2017.01.030 ↗
18. Recrystallization behavior during hot tensile deformation of TA15 titanium alloy sheet with substantial prior deformed substructures10.1016/j.matchar.2019.03.029 ↗
19. Modified kinetic model for describing continuous dynamic recrystallization behavior of Al 2219 alloy during hot deformation process10.1016/j.jallcom.2019.153301 ↗
20. Continuous dynamic recrystallization (CDRX) model for aluminum alloys10.1007/s10853-017-1845-4 ↗
21. A model of continuous dynamic recrystallization10.1016/S1359-6454(03)00078-8 ↗
22. Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method10.1016/j.ijplas.2018.03.002 ↗
23. A CDRX-based material model for hot deformation of aluminium alloys10.1016/j.ijplas.2020.102844 ↗
24. Modelling dynamic recrystallisation in magnesium alloy AZ3110.1016/j.ijplas.2021.102995 ↗
25. A predictive mesoscale model for continuous dynamic recrystallization
26. Analysing the interaction between microscopic deformation, microstructure and void evolution of near-α titanium alloys during non-superplastic hot deformation by an integrated crystal plasticity finite element model10.3390/ma15010294 ↗
27. Grain size model for continuous dynamic recrystallization of titanium alloy in hot deformation10.1007/s11431-018-9336-9 ↗
28. Misorientation development in continuous dynamic recrystallization of AZ31B alloy sheet and polycrystal plasticity simulation10.1016/j.msea.2018.05.095 ↗
29. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes
30. Effect of grain size on the yield stress and microscopic mechanism of a near-a titanium alloy during non-superplastic hot deformation10.1016/j.msea.2022.142932 ↗
31. Analysis of deformation inhomogeneity and slip mode of TA15 titanium alloy sheets during the hot tensile process based on crystal plasticity model10.1016/j.msea.2017.08.094 ↗
32. Diffusional and dislocation accommodation mechanisms in superplastic materials10.1016/j.actamat.2020.07.042 ↗
33. A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys10.1016/j.ijplas.2016.09.008 ↗
34. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach10.1016/j.ijplas.2020.102710 ↗
35. A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys10.1016/j.ijplas.2016.09.008 ↗
36. Iso‐work increment assumption for heterogeneous material behaviour modelling10.1002/adem.200300524 ↗
37. The effect of solute on discontinuous dynamic recrystallization10.1016/j.actamat.2012.08.021 ↗
38. Mechanical behavior of a compositionally graded 300M steel10.1016/j.msea.2013.04.006 ↗
39. A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy10.1016/j.ijplas.2020.102862 ↗