Concentration-dependent construction of raspberry-like SiO2 shell on spherical FeNi towards improved electromagnetic performance from kHz to GHz
Source abstract
Abstract
Constructing resistive layer with novel structure holds great potential in upgrading electromagnetic properties of soft magnetic materials in a wide frequency range. In this work, [email protected]2 composites with controllable core–shell structures, including 2D-type laminar shell and 3D-type raspberry-like shell, were fabricated by modified Stöber method. The structure of SiO2 shell depends highly on the concentration of tetraethyl orthosilicate (TEOS). In detail, a laminar shell can be formed at low TEOS concentration, owing to slow condensation. While at high TEOS concentration, heterogeneous growth on powder surface and homogeneous growth in solution of silica networks are significantly accelerated, resulting in the formation of the raspberry-like shell. Improved electromagnetic performance of [email protected]2 cores at 2 MHz, including high resistivity, low eddy current loss, and low loss factor, should be ascribed to the unique raspberry-like shell structure. Meanwhile, raspberry-like shell also contributes to enhanced attenuation and acceptable impedance matching in GHz range. Consequently, a wide effective absorption bandwidth of 8.92 GHz can be achieved at a thin thickness of 1.85 mm. This work provides deep insights into the growth mechanism of different SiO2 shells and sheds new light on the design of high-performance soft magnetic composites working in different frequency bands.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Soft magnetic materials for a sustainable and electrified world
2. Microstructure and magnetic properties of FeSiCr soft magnetic powder cores with a MgO insulating layer prepared by the sol-gel method10.1016/j.ceramint.2022.04.227 ↗
3. Correlating the microstructure, growth mechanism and magnetic properties of FeSiAl soft magnetic composites fabricated via HNO3 oxidation10.1016/j.actamat.2018.01.001 ↗
4. Soft magnetic composites FeSiAl/MoS2 with high magnetic permeability and low magnetic loss10.1016/j.jallcom.2022.166893 ↗
5. A 200 °C curable soft magnetic composite with high permeability and low core loss for power applications at >1 MHz10.1016/j.jmmm.2021.168061 ↗
6. Highly efficient inorganic-coated FeSiAl/biotite soft magnetic composites10.1016/j.jmrt.2022.11.004 ↗
7. Fe-based amorphous soft magnetic composites with SiO2 insulation coatings: a study on coatings thickness, microstructure and magnetic properties10.1016/j.ceramint.2020.02.128 ↗
8. Sodium nitrate passivation as a novel insulation technology for soft magnetic composite10.1016/j.eng.2022.01.016 ↗
9. Hierarchical magnetic network constructed by CoFe nanoparticles suspended within “tubes on rods” matrix toward enhanced microwave absorption10.1007/s40820-020-00572-5 ↗
10. Microstructure design of high-entropy alloys through a multistage mechanical alloying strategy for temperature-stable megahertz electromagnetic absorption10.1007/s40820-022-00886-6 ↗
11. Magnetic-dielectric complementary Fe-Co-Ni alloy/carbon composites for high-attenuation C-band microwave absorption via carbothermal reduction of solid-solution precursor
12. Multi-scale magnetic coupling of Fe@SiO2@C-Ni yolk@triple-shell microsphere for broadband microwave absorption10.1039/C9NR06629B ↗
13. Sandwich-like Fe&TiO2@C nanocomposites derived from MXene/Fe-MOFs hybrids for electromagnetic absorption10.1007/s40820-020-0398-2 ↗
14. Multifunctional flower-like core-shell Fe/Fe4N@SiO2 composites for broadband and high-efficiency ultrathin electromagnetic wave absorber10.1016/j.jmst.2022.05.045 ↗
15. Lightweight, self-cleaning and refractory FeCo@MoS2 PVA aerogels: from electromagnetic wave-assisted synthesis to flexible electromagnetic wave absorption10.1007/s12598-022-02191-y ↗
16. Heterostructured CoFe@N-doped carbon porous polyhedron for efficient microwave absorption
17. Composition design and performance regulation of three-dimensional interconnected FeNi@carbon nanofibers as ultra-lightweight and high efficiency electromagnetic wave absorbers10.1016/j.carbon.2022.07.005 ↗
18. Effects of processing parameters and heat treatment on the microstructure and magnetic properties of the in-situ synthesized Fe-Ni permalloy produced using direct energy deposition10.1016/j.jallcom.2022.164415 ↗
19. Magnetic spectra of soft magnetic composites based on Fe-Si-Cr-B amorphous and carbonyl-iron powders10.1007/s10948-019-5078-4 ↗
20. Enhanced low-frequency electromagnetic properties of MOF-derived cobalt through interface design10.1021/acsami.8b10685 ↗
21. Synthesis and characterization of polyaniline-silica composites: raspberry vs core-shell structures. Where do we stand?10.1016/j.jcis.2017.04.092 ↗
22. Synthesis of ZnO@SiO2 core-shell structure-based thermal control coatings with enhanced UV irradiation stability10.1016/j.ceramint.2022.06.105 ↗
23. SiO2 nanoparticles enhanced silicone resin as the matrix for Fe soft magnetic composites with improved magnetic, mechanical and thermal properties10.1016/j.jallcom.2017.12.322 ↗
24. Fabrication of carbonyl iron powder/SiO2-reduced iron powder/SiO2 soft magnetic composites with a high resistivity and low core loss10.1016/j.jmmm.2018.05.053 ↗
25. Synthesis of disperse amorphous SiO2 nanoparticles via sol-gel process10.1016/j.ceramint.2016.09.133 ↗
26. Synthesis of ZnO@SiO2 core-shell structure-based thermal control coatings with enhanced UV irradiation stability10.1016/j.ceramint.2022.06.105 ↗
27. The influence of water content on the growth of the hybrid-silica particles by sol-gel method10.1007/s12633-020-00756-z ↗
28. Unraveling the growth mechanism of silica particles in the stöber method: in situ seeded growth model10.1021/acs.langmuir.7b01140 ↗
29. Preparation of fractal-like silica particles based on Stöber method by using tetrabutylammonium hydroxide as co-catalyst10.1016/j.colsurfa.2021.127091 ↗
30. High performance of Fe-based soft magnetic composites coated with novel nano-CaCO3/epoxy nanocomposites insulating layer10.1016/j.jssc.2021.122634 ↗
31. Enhancement of magnetic properties in FeCoNiCr0.4CuX high entropy alloys through the cocktail effect for megahertz electromagnetic wave absorption10.1016/j.jallcom.2021.159602 ↗
32. Structural studies, magnetic properties and loss separation in iron-phenolicsilane soft magnetic composites10.1016/j.matdes.2009.06.044 ↗
33. Fe/Fe3C@N-doped carbon composite materials derived from MOF with improved framework stability for strong microwave absorption10.1016/j.synthmet.2022.117272 ↗
34. Optimal particle distribution induced interfacial polarization in hollow double-shell composites for electromagnetic waves absorption performance10.1016/j.jcis.2022.12.048 ↗
35. Fabrication of CuS/Fe3O4@polypyrrole flower-like composites for excellent electromagnetic wave absorption10.1016/j.jcis.2022.12.029 ↗
36. Tunable shell thickness of Fe-N@SiO2 nanoparticles for strong and stable microwave absorption properties with enhanced oxidation resistance10.1016/j.jallcom.2022.166015 ↗
37. Tunable electromagnetic and broadband microwave absorption of SiO2-coated FeSiAl absorbents10.1016/j.jallcom.2020.157966 ↗
38. Electromagnetic wave absorption performance and mechanisms of geopolymer-based composites containing core-shell SiO2@Fe3O4 nanoparticles10.1016/j.ceramint.2021.10.062 ↗
39. Synthesis of carbon/SiO2 core-sheath nanofibers with Co-Fe nanoparticles embedded in via electrospinning for high-performance microwave absorption10.1007/s42114-021-00350-w ↗
40. Layered double hydroxides derived 3D flower-like FeNi@C microspheres as lightweight and high-efficient electromagnetic wave absorber10.1016/j.carbon.2022.05.037 ↗
41. Hollow SiC microtube with multiple attenuation mechanisms for broadband electromagnetic wave absorption10.1016/j.jallcom.2020.158032 ↗
42. Preparation of FeNi/C composite derived from metal-organic frameworks as high-efficiency microwave absorbers at ultrathin thickness10.1016/j.jcis.2021.10.011 ↗
43. FeNi nanoparticles embedded reduced graphene/nitrogen-doped carbon composites towards the ultra-wideband electromagnetic wave absorption10.1016/j.jcis.2020.09.122 ↗
44. Synergistic construction of three-dimensional conductive network and double heterointerface polarization via magnetic FeNi for broadband microwave absorption10.1007/s42114-021-00415-w ↗
45. Design of porous FeNi-carbon nanosheets by a double-effect synergistic strategy for electromagnetic wave absorption10.1016/j.carbon.2022.01.007 ↗
46. FeNi alloy and nickel ferrite codoped carbon hollow microspheres for high-efficiency microwave absorption10.1039/D2TC00135G ↗
47. Preparation and electromagnetic wave absorption properties of SiC/SiO2 nanocomposites with different special structures10.1016/j.apsusc.2022.153968 ↗
48. Yolk-shell structured Co@SiO2@Void@C nanocomposite with tunable cavity prepared by etching of SiO2 as high-efficiency microwave absorber10.1016/j.jcis.2021.03.011 ↗
49. A flexible and lightweight biomass-reinforced microwave absorber10.1007/s40820-020-00461-x ↗
50. Plasma-induced FeSiAl@Al2O3@SiO2 core-shell structure for exceptional microwave absorption and anti-oxidation at high temperature10.1016/j.cej.2019.123371 ↗