Effect of sulfur content on precipitation behaviour of MnS-containing inclusions in X70 pipeline steel
Source abstract
Abstract
The presence of oxide-MnS complex inclusions is beneficial for the improvement of hydrogen resistance in pipeline steel. The effect of S and Mg contents on the generation mechanism of MnS, MgAl2O4, and MgO inclusions, and the heterogeneous nucleation principle of MnS on the surfaces of MgAl2O4 and MgO were revealed using laboratory experiments, thermodynamic calculations, and density functional theory (DFT) computations. The inclusion characteristics in steel were evaluated by using a Scanning Electron Microscope in combination with an Energy Dispersive Spectrometer (SEM + EDS). It has been found that as the Mg content increased, MgAl2O4 transformed into MgO, which can be well predicted by thermodynamic calculations. It was found that MnS exhibited the ability to nucleate heterogeneously on the surfaces of MgO and MgAl2O4 inclusions. Furthermore, proper S content (approximately 30 ppm) can facilitate the formation of oxide-MnS complex inclusions, excess S content was not desired. The smaller the oxide inclusion, the easier to form wrapped MnS on the oxides. The nucleation ability of MnS and MgAl2O4 was identified by DFT calculations and found that they followed the order of (111)MnS//(111)MgAl2O4>(100)MnS//(100)MgAl2O4>(110)MnS//(110)MgAl2O4. Furthermore, the heterogeneous nucleation ability of MnS and MgO followed in the order of (111)MnS//(111)MgO > (100)MnS//(111)MgO > (100)MnS//(100)MgO. This study provides theoretical evidence supporting the heterogeneous nucleation ability of MnS on the surfaces of MgO and MgAl2O4. Moreover, it helps bridge the disparity between the calculation of MnS and MgO nucleation using the two-dimensional mismatch degree and the experimental findings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Metallurgical Processes and Thermodynamics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Hydrogen storage and delivery: review of the state of the art technologies and risk and reliability analysis10.1016/j.ijhydene.2019.03.041 ↗
2. Effect of welding processes and conditions on the microstructure, mechanical properties and corrosion resistance of duplex stainless steel weldments-A review10.1016/j.jmapro.2016.11.003 ↗
3. Research progress on corrosion behavior of gaseous CO2 transportation pipelines containing impurities
4. Integrity assessment of supercritical CO2 transport pipelines
5. An approach of quantitative risk assessment for release of supercritical CO2 pipelines10.1016/j.jngse.2021.104131 ↗
6. Hydrogen assisted cracking and CO2 corrosion behaviors of low-alloy steel with high strength used for armor layer of flexible pipe10.1016/j.apsusc.2018.01.223 ↗
7. Hydrogen related degradation in pipeline steel: a review10.1016/j.ijhydene.2018.06.064 ↗
8. Comparison on the cracking susceptibility of different low alloy steel weldments exposed to the environment containing wet H2S10.1016/j.engfailanal.2005.07.009 ↗
9. Corrosion resistance and tendency towards corrosion-mechanical failure of new pipe steels in hydrogen sulfide-containing media in Northern Russia oil fields
10. Evaluation of HIC/SSCC resistance for API-X70 Pipe manufactured by JCO bending process and SA welding10.5781/JWJ.2014.32.5.1 ↗
11. Chen B.,Ma Y.C.,Liu K.,et al. Effect of Mg addition on the microstructure and properties of a Heat-Affected Zone in submerged arc welding of an Al-Killed low carbon steel10.3390/ma14092445 ↗
12. The effect of Al-Mg deoxidation on the cleanliness of steel during the electroslag remelting process10.1002/srin.201900185 ↗
13. Effect of Mg treatment on inclusions of X65 pipeline steel
14. Morphology and precipitation kinetics of MnS in low-carbon steel during thin slab continuous casting process10.1016/S1006-706X(06)60091-5 ↗
15. Effect of magnesium on inclusions in a high sulfur steel10.1007/s11663-022-02446-0 ↗
16. Laboratory study on prevention of CaO-containing ASTM “D-Type” inclusions in Al-Deoxidized low-oxygen steel melts during basic slag refining10.1007/s11663-015-0438-3 ↗
17. Formation and evolution behavior of inclusions in Al-killed resulfurized free-cutting steel with magnesium treatment10.1007/s42243-020-00401-4 ↗
18. Modification of inclusions in liquid iron by Mg treatment10.1016/S1006-706X(14)60130-8 ↗
19. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron
20. Relationship between crystallographic structure of complex inclusions MgAl2O4/Ti2O3/MnS and improved toughness of heat-affected zone in shipbuilding steel10.1007/s42243-021-00725-9 ↗
21. Effect of nitrogen content on solidification behaviors and morphological characteristics of the precipitates in 55Cr17Mo1VN plastic die steel
22. Precipitation of homogeneous nanoscale HfRe2 in NiAl by strain-induced precipitation10.1016/j.matchar.2022.112280 ↗
23. Effect of Mg-Ti treatment on nucleation mechanism of TiN inclusions and ferrite10.3390/met10060755 ↗
24. Heterogeneous nucleation of pure A1 on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer10.1016/j.jallcom.2018.04.263 ↗
25. First-principles calculations on Ni/W interfaces in Steel/Ni/W hot isostatic pressure diffusion bonding layer10.1016/j.apsusc.2019.01.047 ↗
26. Liu H.,Xue W.,Ju B.Y.,et al. Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite10.1016/j.apsusc.2020.148592 ↗
27. The formation of TiC-NbC core-shell structure in hypereutectic high chromium cast iron leads to significant refinement of primary M7C310.1016/j.jallcom.2020.153806 ↗
28. Hydrogen sulfide stress cracking in a Q345R welded joint
29. Investigating the influence mechanism of hydrogen partial pressure on fracture toughness and fatigue life by in-situ hydrogen permeation10.1016/j.ijhydene.2021.03.183 ↗
30. Effect of Al2O3 content in inclusions on the precipitation of MnS during cooling of a heavy rail steel
31. Calculation of the critical velocity for the pushing/engulfment transition of nonmetallic inclusions in steel10.2355/isijinternational.38.503 ↗
32. Transient inclusion evolution during RH degassing10.1002/srin.201300030 ↗
33. Agglomeration of non-metallic inclusions at the steel/Ar interface: model application10.1007/s11663-017-0998-5 ↗
34. First-principles study on growth mechanism of TiN on MgO (1 0 0) and (1 1 0) surfaces10.1016/j.commatsci.2020.110257 ↗
35. Noncontact atomic force microscopy imaging of atomic structure and cation defects of the polar MgAl2O4 (100) surface: experiments and first-principles simulations10.1103/PhysRevB.84.235419 ↗
36. MgAl2O4 inclusion agglomeration on the surface of liquid steel10.1007/s11663-019-01688-9 ↗
37. Thermal diffusivity and thermal conductivity of single-crystal MgO and Al2O3 and related compounds as a function of temperature10.1007/s00269-014-0655-3 ↗
38. Thermal conductivity prediction of MgAl2O4: a non-equilibrium molecular dynamics calculation10.1007/s42243-020-00364-6 ↗
39. Fuzzy sets as a basis for a theory of possibility10.1016/0165-0114(78)90029-5 ↗
40. Thermodynamic evaluation of formation of oxide–sulfide duplex inclusions in steel10.2355/isijinternational.48.1552 ↗
41. Chen · Effect of sulphur concentration on precipitation behaviors of MnS-containing inclusions in GCr15 bearing steels after LF refining. ISIJ Int · 2017 · 6 · 1019
42. H.,Feng G.,Liu X.,Wang B.,Liu X. Effect of sulfur content on the composition of inclusions and MnS precipitation behavior in bearing steel10.3390/met10050570 ↗
43. Thermodynamics and agglomeration behavior on spinel inclusion in Al-deoxidized steel coupling with Mg treatment10.3390/met9080900 ↗
44. Origins of the universal binding-energy relation10.1103/PhysRevB.37.6632 ↗
45. First principles methods using CASTEP10.1524/zkri.220.5.567.65075 ↗
46. Improved adsorption energetics within density-functional theory using revised Perdew-Burke-Ernzerhof functionals10.1103/PhysRevB.59.7413 ↗
47. X-ray determination of electron-density distributions in oxides, MgO, MnO, CoO, and NiO, and atomic scattering factors of their constituent atoms10.2183/pjab.55.43 ↗
48. Refinement of the structure of the spinel Al2MgO4
49. Static compression of α-MnS at 298 K to 21 GPaPhys10.1007/BF00203844 ↗
50. Mathematical model for prediction of composition of inclusions formed during solidification of liquid steel. ISIJ