Fracture mechanism of ultrasound-assisted scratching 2D-SiCf/SiC composite fibers with different fiber orientations
Source abstract
Abstract
Abstract—The aim of this paper is to investigate the grinding characteristics and mechanism of 2D- SiC/SiC composites with 0°/90° orthogonal anisotropic structured surfaces under different scratching fiber angles (angle between scratch direction and fiber orientation, SFA). A series of surface single abrasive scratching tests were conducted. The effects of the scratch fiber angle on the grinding force, surface morphology and roughness were investigated. The results show that the scratch force and surface roughness at different scratch fiber angles are in the order of 0°> 30°> 45°; SFA also has an important effect on the surface microstructure. The grinding mechanism of 2D-SiCf/SiC composites was analyzed by single-particle scratching test. The results of the scratch force and surface morphology provide strong evidence of the differences produced during the grinding process. The advantages of ultrasonic vibration over conventional machining were further identified by comparing specific scratch energies. This study elucidates the damage behavior of 2D-Sicf/sic composites in correlation with the influence of angle, and these results provide a new guideline for ultrasonic vibratory grinding of woven fiber-reinforced ceramic matrix composites for machining quality.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. On understanding the microstructure of SiC/SiC Ceramic Matrix Composites (CMCs) after a material removal process10.1016/j.msea.2018.11.037 ↗
2. Fabrication of silicon carbide fiber-reinforced silicon carbide matrix composites using binder jetting additive manufacturing from irregularly-shaped and spherical powders10.3390/ma13071766 ↗
3. Characteristics of silicon carbide fiber-reinforced composite for microwave absorbing structures
4. Processing-temperature dependent micro- and macro-mechanical properties of SiC fiber reinforced SiC matrix composites10.1016/j.compositesb.2017.07.079 ↗
5. Machining of SiC ceramic matrix composites: a review10.1016/j.cja.2020.08.001 ↗
6. Effect of oxidation treatment on KD-II SiC fiber-reinforced SiC composites10.1016/j.ceramint.2017.05.001 ↗
7. Tensile properties of two-dimensional carbon fiber reinforced silicon carbide composites at temperatures up to 1800 °C in air10.1016/j.eml.2019.100546 ↗
8. Investigations on tool clogging and surface integrity in ultrasonic vibration-assisted slot grinding of unidirectional CFRP10.1007/s00170-020-06364-w ↗
9. Experimental study on milling performance of 2D C/SiC composites using polycrystalline diamond tools10.1016/j.ceramint.2019.02.124 ↗
10. Mechanism and feasibility of ultrasonic-assisted milling to improve the machined surface quality of 2D Cf/SiC composites
11. Xu · 2020 · vol. 37 · 424
12. Improving hole exit quality in rotary ultrasonic machining of ceramic matrix composites using a compound step-taper drill10.1016/j.ceramint.2016.05.095 ↗
13. Influence of in-plane and out-of-plane machining on the surface topography, the removal mechanism and the flexural strength of 2D C/C-SiC composites10.1016/j.jeurceramsoc.2020.10.063 ↗
14. Mechanical modeling of ultrasonic vibration helical grinding of SiC/SiC composites10.1016/j.ijmecsci.2022.107701 ↗
15. Mechanical properties and microstructure evolution of additive manufactured 316L stainless steel under dynamic loading
16. A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic
17. Fixed abrasive machining of non-metallic materials10.1016/j.cirp.2018.05.010 ↗
18. A new one-step approach for the fabrication of microgrooves on Inconel 718 surface with microporous structure and nanoparticles having ultrahigh adhesion and anisotropic wettability: laser belt processing
19. Single diamond scribing of SiCf/SiC composite: force and material removal mechanism study10.1016/j.ceramint.2021.06.195 ↗
20. Investigation on the surface formation mechanism in scratching of CFRP composites with different fiber orientations
21. Investigation on scratching force and material removal mechanism of 3D SiCf/C–SiC composites during single grain scratching10.1016/j.jeurceramsoc.2022.05.079 ↗
22. Damage behavior and removal mechanism of different yarn orientations 2.5D SiCf/SiC composites under single-abrasive scratch test10.1016/j.ceramint.2022.07.041 ↗
23. Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests10.1016/j.ceramint.2018.11.165 ↗
24. Effects of grinding speed on the material removal mechanism in single grain grinding of SiCf/SiC ceramic matrix composite10.1016/j.ceramint.2021.01.140 ↗
25. Mechanism of the ultrasonic machining of ceramic composites10.1016/S0924-0136(97)00068-X ↗
26. Effects of fiber orientation angles of fiber-reinforced plastic on sand solid particle erosion behaviors10.1080/09243046.2016.1180571 ↗
27. Transformation of fracture mechanism and damage behavior of ceramic-matrix composites during nano-scratching
28. Influence of grit geometry and fibre orientation on the abrasive material removal mechanisms of SiC/SiC Ceramic Matrix Composites (CMCs)10.1016/j.ijmachtools.2020.103580 ↗
29. Effect of tool wear on drilling unidirectional CFRP laminates in different fiber cutting angles10.1007/s00170-020-05872-z ↗
30. Influence of grinding fiber angles on grinding of the 2D-C/C-SiC composites10.1016/j.ceramint.2018.04.083 ↗
31. A cutting force model for rotary ultrasonic machining of brittle materials10.1016/j.ijmachtools.2011.09.006 ↗
32. Material removal mode and friction behaviour of RB-SiC ceramics during scratching at elevated temperatures10.1016/j.jeurceramsoc.2019.05.015 ↗