journal article·2024-07Open access

Microstructure and properties of Ti55531 alloy subjected to deep cryogenic treatment

Zhi Liu, Tongsheng Deng, Ruyi Ai, Yucheng Yang, Yupeng Yuan, Wei Chen, Wenhao He, Weirong Li, Wenlong Xiao

Abstract

The cryogenic treatment of near β Ti–5Al–5Mo–5V–3Cr–1Zr (Ti55531) alloy was conducted using the liquid nitrogen refrigeration method. The microstructure and properties were characterized by scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results show that the alloy achieves optimal properties at a cryogenic time of 8h. Compared to samples that were not cryogenically treated, microhardness, ultimate tensile strength (UTS), and elongation increased by 12.9%, 6.8%, and 8.0% respectively. Detailed microstructural characterization indicated that the cryogenic processing can lead to grain refinement, enhanced dislocation density, and accelerate the transformation of the metastable β phase into the stable α phase, resulting in a higher volume fraction of the α phase. After cryogenic treatment, the lath-shaped α phase reorients from a vertical to a parallel orientation, and its average width is reduced. Simultaneously, cryogenic treatment diminished texture strength but enhanced the uniformity of the alloy. Improvements induced by cryogenic treatment are attributed to alloy volume and lattice contraction caused by cold compression forces at cryogenic temperatures, which generate internal stress and grain deflection.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Author Correction: Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-020-2291-z ↗
2. Improving thermal stability and creep resistance by Sc addition in near-α high-temperature titanium alloy10.1016/j.jmst.2023.09.056 ↗
3. Experimental investigation on dynamic phase transformation and texture evolution of Ti55531 high strength titanium alloy during hot compression in the α+β region10.1016/j.msea.2019.138851 ↗
4. Review on the effects of rare earths on the creep properties of titanium alloy
5. Phase transformations and mechanical properties of a Ti36Nb5Zr alloy subjected to thermomechanical treatments10.1007/s12598-021-01744-x ↗
6. Ageing precipitation sequence and effect of ω and secondary α phases on tensile properties of metastable β Ti-6Cr-5Mo-5V-4Al alloy10.1016/S1003-6326(23)66218-1 ↗
7. Duplex aging of metastable beta titanium alloys: a Review10.1007/s12666-022-02696-1 ↗
8. Hot deformation and dynamic recrystallization of a near-beta titanium alloy in the β single phase region10.1016/j.vacuum.2018.07.056 ↗
9. Study of the hot deformation behaviour in Ti–5Al–5Mo–5V–3Cr–1Zr10.1016/j.msea.2011.07.068 ↗
10. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
11. A review of metastable beta titanium alloys10.3390/met8070506 ↗
12. Research Status and Progress of cryogenic treatment technology
13. Cryogenic treatment of metal – a review10.1016/j.matpr.2018.10.324 ↗
14. A review on deep cryogenic treatment of titanium alloy
15. Cryoprocessing of cutting tool materials—a review10.1007/s00170-009-2263-9 ↗
16. Cryogenic treatment of tool materials: a review10.1080/10426911003720862 ↗
17. Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: a review
18. Effect of deep cryogenic treatment on microstructures and performances of aluminum alloys: a review10.1016/j.jmrt.2023.08.140 ↗
19. Deep cryogenic treatment of tool steels10.1016/j.jmatprotec.2015.09.045 ↗
20. Quantifying deep cryogenic treatment extent and its effect on steel properties10.1016/j.ijengsci.2021.103521 ↗
21. Effect of cryogenic treatment on wear behavior of Sleipner cold work tool steel10.1016/j.triboint.2023.108301 ↗
22. Martensitic transformation in rolled 301 stainless steel induced by cryogenic treatment
23. The influence of deep cryogenic treatment on the properties of high-vanadium alloy steel10.1016/j.msea.2016.03.039 ↗
24. Surface hardening and plastic stability of Ti–6Al–4V alloy by cryo-quenching10.1016/j.msea.2023.145394 ↗
25. Improvement of the Machinability of Ti–6Al–4V alloy wire Electro Discharge machining with cryogenic treatment10.1007/s12540-020-00667-z ↗
26. The role of cryogenic quenching on the mechanical properties of FSWed 6061-T6 aluminum alloy10.1016/j.msea.2022.142896 ↗
27. Multiscale modification of aluminum alloys with deep cryogenic treatment for advanced properties10.1016/j.jmrt.2022.10.089 ↗
28. The comprehensive performance and strengthening mechanism of the columnar crystal Cu-Ni-Si alloy after two large deformation rates of cryogenic rolling-aging10.1016/j.jallcom.2022.168281 ↗
29. Experimental and numerical investigation of the effects of deep cold rolling on the bending fatigue tolerance of C38500 brass alloy10.1007/s00170-018-2165-9 ↗
30. Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments10.1016/j.jmrt.2022.07.019 ↗
31. Influence of cryogenic treatment time on the mechanical properties of AZ31 magnesium alloy sheets after cross-rolling10.1016/j.jallcom.2024.174096 ↗
32. Experimental study on defects of needled quartz fiber reinforced phenolic aerogel composites by cryogenic milling
33. Effect of cryogenic treatment and aging treatment on the tensile properties and microstructure of Ti–6Al–4V alloy10.1016/j.msea.2013.07.021 ↗
34. Effect of cryogenic quenching on microstructure and microhardness of Ti-6Al-4V alloy10.1016/j.matlet.2020.127532 ↗
35. Monotonic and cyclic behavior of Ti–2.5Cu alloy at room temperature (293 K) and at 77 K10.1016/S0167-577X(01)00556-0 ↗
36. Achieving synergistic improvement of wear and mechanical properties in Ti–6Al–4V alloy by multiple cryogenic treatment10.1016/j.jmrt.2024.02.209 ↗
37. Microstructure evolution in metastable β titanium alloy subjected to deep cryogenic treatment10.1016/j.msea.2018.03.003 ↗
38. Performance and microstructure of TC4 titanium alloy subjected to deep cryogenic treatment and magnetic field10.1016/j.jallcom.2019.06.007 ↗
39. Effect of heat treatment on mechanical properties of Ti–6Al–4V ELI alloy10.1016/j.msea.2008.11.018 ↗
40. Thermophysical properties of Ti-5Al-5V-5Mo-3Cr-1Zr titanium alloy10.1134/S0031918X14050020 ↗
41. Study of precipitation-assisted stress relaxation and creep behavior during the ageing of a nickel-iron superalloy10.1016/j.msea.2018.11.028 ↗
42. Analytic model for the Orowan dislocation-precipitate bypass mechanism10.1016/j.mtla.2020.100671 ↗