journal article·2024-11Open access

Microstructure evolution and mechanical response of hetero-induced SiCp addition in Al-6061 under high strain rate compressive loading

Tahir Mehmood Bhatti, Yangwei Wang, Saeed Jamal, Mirza Muhammad Abu Bakar Baig, Fatima Shehzadi

Abstract

Al/SiC composites having a high-volume fraction of SiC are eye-catching materials in the automobile and aerospace industries. However, their behavior under stringent environments i.e., under high strain rate compression is much different than quasi-static compression. For such conditions, the morphology, interfacial bonding, and the fraction of the SiC play a decisive role in achieving the high performance of the Al/SiC composites. Here, in this study, we reported that a transitional effect of de-bonding and intergranular crack in SiC has occurred in Al–SiC composites having SiC particle size >0.7 μm. Below the 0.7 μm, the diffusion of the Al dislocations is characterized on the boundary of SiC along with the strong interfacial bonding. To prove it, we have fabricated an Al6061/30 vol% SiC composite through powder metallurgy route and subsequently subjected to compression in the range of strain rate 0.001–2100 s −1 . In support of our observations, the microstructure was characterized by optical microscopy, scanning electron microscopy, X-ray diffraction, electron backscattered diffraction, and transmission electron microscopy analysis. The result also revealed a positive strain rate sensitivity up to a strain rate of 1800 s −1 , while for 2100 s −1 , the flow stress decreased, which is the cause of adiabatic temperature rise, dynamic recrystallization in Al, and massive cracks and deboning in coarse SiC particles. We also characterized that the SiC having particle size 1–4 μm showed stacking fault and dislocation induced in the SiC due to strong interfacial bonding. A quantitate analysis of dislocation was also established by using the Williamson-Hall technique which further confirmed the dislocation activity and dynamic recrystallization in 2100 s −1 , characterized by EBSD and TEM. Thus, this study enables our understating that using the fine SiC particles is promising for achieving the high performance of the Al/SiC composites for use in stringent environments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Compressive deformation behaviour of coarse SiC particle reinforced composite: effect of age-hardening and SiC content10.1016/j.msea.2007.03.001 ↗
2. Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties10.1016/j.jmapro.2020.09.010 ↗
3. Effect of reinforcement volume fraction on the evolution of reinforcement size during the extrusion of Al-SiC composites10.1016/S0921-5093(01)01526-X ↗
4. Abrasive wear behavior and mechanical properties of Al–Si/SiC composites10.1016/j.wear.2004.03.006 ↗
5. Effects of volume fraction of SiC particles on mechanical properties of SiC/Al composites10.1016/S1003-6326(09)60040-6 ↗
6. Effect of particle size of SiC in aluminium matrix on workability and strain hardening behaviour of P/M composite10.1016/j.msea.2008.11.037 ↗
7. Effect of SiC particle size on the physical and mechanical properties of extruded Al matrix nanocomposites10.1016/j.matdes.2013.08.049 ↗
8. Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing10.1016/j.powtec.2014.08.016 ↗
9. Effect of particle size on the thermal and mechanical properties of aluminum composites reinforced with SiC and diamond10.1016/j.matdes.2015.11.028 ↗
10. Effects of size and oxidation treatment for SiC particles on the microstructures and mechanical properties of SiCp/Al composites prepared by powder metallurgy
11. Effects of SiC nanoparticle content on the microstructure and tensile mechanical properties of ultrafine grained AA6063-SiCnp nanocomposites fabricated by powder metallurgy10.1016/j.jmst.2016.09.022 ↗
12. Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation10.1016/j.msea.2011.05.037 ↗
13. SiC/graphene reinforced aluminum metal matrix composites prepared by powder metallurgy: a review10.1016/j.jmapro.2023.02.026 ↗
14. A comprehensive review of advances in ultrasonic vibration machining on SiCp/Al composites10.1016/j.jmrt.2023.04.245 ↗
15. Systematic study of preparation technology, microstructure characteristics and mechanical behaviors for SiC particle-reinforced metal matrix composites10.1016/j.jmrt.2023.07.145 ↗
16. SiCp/Al composites from conventional to empowered machining: mechanisms and processability10.1016/j.compstruct.2024.118433 ↗
17. Interfacial behavior of Al/SiC composites and response against quasi-static loading, dynamic loading, fatigue, and ballistic impact10.1016/j.jallcom.2024.176097 ↗
18. Fatigue life prediction of in-situ TiB2/2024 aluminum matrix composite10.1016/j.ijfatigue.2020.106128 ↗
19. Enhancing hypervelocity impact resistance of titanium substrate using Ti/SiC Metal Matrix Nanocomposite coating10.1016/j.compositesb.2020.108068 ↗
20. The microstructure and ballistic performance of B4C/AA2024 functionally graded composites with wide range B4C volume fraction10.1016/j.compositesb.2018.12.147 ↗
21. Dynamic mechanical properties and constitutive equations of 2519A aluminum alloy10.1016/S1003-6326(14)63330-6 ↗
22. The compressive viscoplastic response of an A359/SiCp metal–matrix composite and of the A359 aluminum alloy matrix10.1016/S0020-7683(99)00304-2 ↗
23. Study of dynamic compressive behaviors of 2D C/SiC composites at elevated temperatures based on in-situ observation10.1016/j.jeurceramsoc.2020.06.036 ↗
24. Effect of W volume fraction on dynamic mechanical behaviors of W fiber/Zr-based bulk metallic glass composites10.1016/j.msea.2015.05.086 ↗
25. Strain rate-dependent compressive deformation and failure behavior of porous SiC/Ti-based metallic glass composite10.1016/j.msea.2014.04.097 ↗
26. The dynamic mechanical response of SiC particulate reinforced 2024 aluminum matrix composites10.1016/j.matlet.2007.02.069 ↗
27. The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process10.1016/j.msea.2009.08.067 ↗
28. High-temperature compressive response of SiCp/6092Al composites under a wide range of strain rates10.3390/ma14216244 ↗
29. High temperature and strain-rate response of AA2124-SiC metal matrix composites
30. Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite10.1016/j.msea.2019.03.037 ↗
31. Mechanical characteristics and deformation behavior of Al polycrystal reinforced with SiC particles10.1016/j.jpcs.2023.111617 ↗
32. Microstructural evolution of ultra-fine grained Mg-6.62Zn-0.6Zr alloy on the basis of adiabatic rise in temperature under dynamic loading10.1016/j.vacuum.2019.108810 ↗
33. In-situ observation of interaction between dislocations and carbon nanotubes in aluminum at elevated temperatures10.1016/j.matlet.2020.127323 ↗
34. A quantitative investigation of dislocation density in an Al matrix composite produced by a combination of micro-/macro-rolling10.3390/jcs6070199 ↗
35. Dislocation-blocking mechanism for the strengthening and toughening of laminated graphene/Al composites10.1016/j.commatsci.2018.12.061 ↗
36. Constitutive description, processing maps, and un-explored deformation mechanisms of pure Mg and Mg-6Al(wt%) alloy under hot compression10.1016/j.jallcom.2023.172629 ↗
37. DYNAMIC COMPRESSIVE PROPERTIES OF ALUMINIUM-MATRIX COMPOSITES REINFORCED WITH SiC PARTICLES
38. The mechanical response of an A359/SiCp MMC and the A359 aluminum matrix to dynamic shearing deformations10.1016/j.msea.2004.04.062 ↗
39. Compressive properties of Al-A206/SiC and Mg-AZ91/SiC syntactic foams10.1557/jmr.2013.176 ↗
40. Effect of milling time on the compressive high strain rate behavior of Al-SiC Composite10.1088/1742-6596/1240/1/012069 ↗
41. Compressive properties of SiC particle-reinforced aluminum matrix composites under repeated impact loading10.1007/s11223-015-9628-0 ↗
42. Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting10.1016/j.msea.2018.06.087 ↗
43. Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes10.1016/j.cja.2022.07.020 ↗
44. Investigation of strain rate on residual stress distribution10.1016/j.matdes.2014.09.051 ↗
45. Grain refinement and weak-textured structures based on the dynamic recrystallization of Mg–9.80Gd–3.78Y–1.12Sm–0.48Zr alloy10.1016/j.jma.2020.06.001 ↗
46. Unveiling the dynamic softening mechanism via micromechanical behavior for a near-β titanium alloy deformed at a high strain rate10.1016/j.jmrt.2023.09.150 ↗
47. A new way to analyze constitutive analysis and its relation to the microstructure of a Mg-Gd-Y-Zn alloy10.1016/j.jallcom.2024.173456 ↗
48. Study of microstructure and mechanical behaviour of aluminium alloy hybrid composite with boron carbide and graphene nanoplatelets10.1016/j.matchemphys.2021.124936 ↗
49. Limiting the development of Al4C3 to prevent degradation of Al/SiCp composites processed by pressureless infiltration10.1016/j.compscitech.2005.07.025 ↗
50. Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes10.1016/j.carbon.2018.04.048 ↗
51. Scanning and transmission electron microscopy study of the microstructural changes occurring in aluminium matrix composites reinforced with SiC particles during casting and welding: interface reactions10.1046/j.1365-2818.1999.00610.x ↗
52. Compatibility of carbon filaments with a carbide coating and an aluminum matrix10.1007/BF00779433 ↗
53. X-ray peak broadening analysis of AA 6061100− x− x wt.% Al2O3 nanocomposite prepared by mechanical alloying10.1016/j.matchar.2011.04.017 ↗
54. Estimation of crystallite size and lattice strain in nano-sized TiC particle-reinforced 6005A aluminium alloy from X-ray diffraction line broadening10.1016/j.powtec.2018.11.010 ↗
55. A comparative study in estimating of crystallite sizes of synthesized and natural hydroxyapatites using Scherrer Method, Williamson-Hall model, Size-Strain Plot and Halder-Wagner Method10.1016/j.molstruc.2024.137820 ↗
56. Effect of high energy ball milling on the morphology, microstructure and properties of nano-sized TiC particle-reinforced 6005A aluminium alloy matrix composite10.1016/j.powtec.2017.07.089 ↗
57. Synthesis, structure and sinterability of 6061 AA100−x–xwt.% TiO2 composites prepared by high-energy ball milling10.1016/j.jallcom.2009.11.051 ↗
58. Influence of high B4C contents on structural evolution of Al-B4C nanocomposite powders produced by high energy ball milling10.1016/j.ceramint.2018.11.247 ↗
59. Deformation behavior of an extruded 7075 aluminum alloy at elevated temperatures10.3390/ma17051210 ↗
60. Microstructure evolution and thermal properties in nanocrystalline Fe during mechanical attrition10.1016/S1359-6454(00)00310-4 ↗