journal article·2024-11Open access

Evolution of precipitate and its effect on the degradation of impact toughness in a carbon and nitrogen-controlled 316 stainless steel during thermal aging at 650 °C

Xinliang Lv, Shenghu Chen, Lijian Rong

Abstract

Impact toughness degradation and microstructure evolution of a carbon and nitrogen-controlled 316 stainless steel during long-term aging at 650 °C for up to 8800 h were investigated. The degradation of impact toughness during aging can be divided into three stages: a rapid decrease during stage I (the first 400 h), a slow decrease during stage II (from 400 to 3200 h), and the stable stage during stage III (up to 8800 h). P enrichment at the M 23 C 6 /γ interface is induced by the rejection of P during the formation of M 23 C 6 carbide, and the M 23 C 6 /γ interface is preferred location for crack initiation. An increase in the amount of grain boundary M 23 C 6 carbides increases the crack initiation sites, resulting in a rapid decrease of impact toughness during stage I. The ongoing rejection of Ni and Si during the coarsening of M 23 C 6 carbide is beneficial for the nucleation of M 6 C carbide. The micro-crack initiation at the M 23 C 6 /M 6 C and M 6 C/γ interfaces is introduced, and a semi-continuous network of M 23 C 6 carbide along grain boundary promotes the crack propagation, leading to a further decrease of impact toughness during stage II. The nearly continuous precipitate morphology is induced through continued growth of grain boundary M 23 C 6 and M 6 C carbides. The propagation of micro-cracks along the M 6 C/γ, M 23 C 6 /γ, and M 23 C 6 /M 6 C interfaces leads to the mostly intergranular fracture, thus the impact energy tends to be stable during stage III.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Roberts · 2013
2. Mechanical properties of austenitic stainless steel 304L and 316L at elevated temperatures10.1016/j.jmrt.2015.04.001 ↗
3. Conventional austenitic steels as out-of-core materials for Generation IV nuclear reactors
4. Yvon · 2016
5. Effect of δ-ferrite on hot deformation and recrystallization of 316KD austenitic stainless steel for sodium-cooled fast reactor application
6. Review on sodium corrosion evolution of nuclear-grade 316 stainless steel for sodium-cooled fast reactor applications10.1016/j.net.2021.05.021 ↗
7. Long-term creep behaviours and structural stabilities of austenitic heat-resistant stainless steels10.1080/09603409.2023.2263719 ↗
8. Strengthening mechanisms and creep rupture behavior of advanced austenitic heat resistant steel SA-213 S31035 for A-USC power plants10.1016/j.msea.2020.138991 ↗
9. Effect of σ-Phase on the creep properties of Cr25Ni20 stainless steel
10. Creep behavior and microstructure evolution at 750° C in a new precipitation-strengthened heat-resistant austenitic stainless steel10.1016/j.msea.2012.07.090 ↗
11. Effects of Si on the stress rupture life and microstructure of a novel austenitic stainless steel10.1016/j.jmrt.2023.06.131 ↗
12. Effects of N and Cu on the precipitation and the creep life of 316L austenitic stainless steel at 650 °C10.1016/j.msea.2016.03.054 ↗
13. Investigation the effect of precipitating characteristics on the creep behavior of HR3C austenitic steel at 650 °C10.1016/j.msea.2018.10.124 ↗
14. Horak · 1985
15. Phase instabilities during high temperature exposure of 316 austenitic stainless steel10.1007/BF02647659 ↗
16. Variation of mechanical characteristics and microstructural evolution in AISI 316 austenitic stainless steel subjected to long-term thermal aging at elevated temperature10.1007/s11223-017-9866-4 ↗
17. G phase and ferrite in a high Si austenitic stainless steel during 510 °C aging10.1016/j.matchar.2023.113587 ↗
18. Precipitation control by W addition in aged heat-resistant austenitic 22Cr-25Ni steels and its effect on mechanical properties10.1016/j.matchar.2022.111768 ↗
19. χ phase and its effect on the mechanical properties of a Mo-bearing high–Si austenitic stainless steel after aging at 650°C10.1016/j.jmrt.2023.02.069 ↗
20. Microstructure evolution and mechanical properties of 16Cr–25Ni superaustenitic stainless steel weld metal during 600 °C aging10.1016/j.jmrt.2022.11.134 ↗
21. Evolution of the microstructure and mechanical properties of HR3C austenitic stainless steel after ageing for up to 30,000 h at 650–750 °C10.1016/j.msea.2020.139944 ↗
22. Effect of high-temperature exposure on the mechanical properties of 18Cr–8Ni–W–Nb–V–N stainless steel10.1016/j.msea.2012.06.011 ↗
23. Precipitation and properties at elevated temperature in austenitic heat-resistant steels-a review10.1002/srin.202000378 ↗
24. Precipitation and hot deformation behavior of austenitic heat-resistant steels: a review10.1016/j.jmst.2017.01.025 ↗
25. Study on the microstructure and creep fracture behavior of 22Cr 15Ni steel welded joint after aging at 650 °C10.1016/j.jmrt.2024.02.129 ↗
26. Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550 °C10.1016/j.actamat.2024.119948 ↗
27. Intergranular precipitation behavior and its influence on the stress relaxation cracking susceptibility of Super304H austenitic stainless steel weld metal during long-term aging10.1016/j.matchar.2021.111309 ↗
28. The role of phosphorus in precipitation behavior and its effect on the creep properties of alumina-forming austenitic heat-resistant steels10.1016/j.msea.2016.12.021 ↗
29. Goldschmidt · 1967
30. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
31. Precipitation in creep resistant austenitic stainless steels
32. Tailoring microstructure of austenitic stainless steel with improved performance for generation-IV fast reactor application: a Review10.3390/cryst13020268 ↗
33. Corrosion behavior of δ-ferrite in AISI 316 austenitic stainless steel exposed to oxygen-saturated lead-bismuth eutectic at 550° C10.1016/j.matchar.2024.113930 ↗
34. Absence of dynamic strain aging induced by precipitation in 316 austenitic stainless steel during thermal aging at 750 °C10.1016/j.matchar.2023.113580 ↗
35. Role of δ-ferrite in fatigue crack growth of AISI 316 austenitic stainless steel10.1016/j.jmst.2021.10.008 ↗
36. Modeling of excess vacancy annihilation at different types of sinks10.1016/j.actamat.2011.02.020 ↗
37. Grain boundary structure and chromium segregation in a 316 stainless steel10.1016/0956-7151(91)90238-V ↗
38. Cr-vacancy elastic and chemical interactions in irradiated stainless steels10.1557/PROC-540-501 ↗
39. Effect of microstructure evolution on the creep properties of a polycrystalline 316H austenitic stainless steel10.1016/j.msea.2019.138787 ↗
40. Thermodynamic analysis of carbide precipitation and effect of its configuration on creep properties of FGH95 powder nickel-based superalloy10.1016/j.msea.2017.05.108 ↗
41. Grain boundary character correlated carbide precipitation and mechanical properties of Ni-20Cr-18W-1Mo superalloy10.1016/j.msea.2016.05.028 ↗
42. A new model of grain boundary failure in temper embrittled steel10.1016/0001-6160(79)90079-8 ↗
43. Atomistic studies of grain boundary segregation in Fe-P and Fe-B alloys—I. Atomic structure and stress distribution10.1016/0001-6160(84)90195-0 ↗
44. Embrittlement of interfaces by solute segregation10.1016/0921-5093(89)90372-9 ↗
45. First principles determination of the effects of phosphorus and boron on iron grain boundary cohesion10.1126/science.265.5170.376 ↗
46. Effect of TiN particles and grain size on the charpy impact transition temperature in steels10.1016/S1005-0302(12)60146-7 ↗
47. An accelerating thermal aging model of RAFM steel: strategy to save time and cost of thermal aging experiment10.1016/j.jnucmat.2019.151839 ↗
48. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
49. APT characterization of solute segregation to individual dislocations
50. The mechanism of dynamic strain aging for type A serrations in tensile flow curves of Fe-18Mn-0.55C (wt.%) twinning-induced plasticity steel10.1016/j.actamat.2020.02.020 ↗
51. Studies of dislocations by field ion microscopy and atom probe tomography10.1080/14786435.2013.818257 ↗
52. Three-dimensional atomic-scale imaging of impurity segregation to line defects10.1126/science.286.5448.2317 ↗
53. The hidden structure dependence of the chemical life of dislocations10.1126/sciadv.abf0563 ↗
54. Three-dimensional atomic-scale mapping of a Cottrell atmosphere around a dislocation in iron10.1016/S1359-6462(00)00361-4 ↗
55. Specimen preparation methods for elemental characterization of grain boundaries and isolated dislocations in multicrystalline silicon using atom probe tomography10.1016/j.matchar.2017.07.038 ↗
56. Gigacycle fatigue endurance of marine grade stainless steels with corrosion pits10.3311/PPtr.7109 ↗
57. Wu · 1987
58. Study on carbides in tool steels10.2355/isijabstracts.8.0_8 ↗
59. An overview of the microstructures present in high-speed steel-carbides crystallography10.4028/www.scientific.net/MSF.530-531.48 ↗
60. Thermal evolution of vacancy-type defects in quenched FeCrNi alloys10.1007/s00339-015-9116-1 ↗
61. Electron irradiation-induced defects in Mo-diluted FeCrNi austenitic alloy during void swelling incubation