Effect of deep cryogenic treatment on microstructure and mechanical properties of 18Ni (200) cryogenic maraging steel
Source abstract
Abstract
The study investigated the effects of different cryogenic treatment time at −196 °C on the mechanical properties, microstructure, and fracture behavior of 18Ni (200) maraging steel. The results showed that deep cryogenic treatment (DCT) resulted in enhancements in both the strength and hardness of the maraging steel, as well as a notable improvement in cryogenic toughness. Specifically, the −196 °C impact energy (AKV) of the specimen subjected to an 18-h treatment was measured at 45 J, reflecting a 21% increase relative to the untreated specimen, thereby achieving optimal strength-toughness matching. Microstructural analysis revealed that DCT process facilitated the transformation of retained austenite to martensite after quenching, enhancing the stability of the microstructure and increasing dislocation density. Calculated results of lattice parameters and lattice strain indicated that DCT process, especially for 18 h, significantly affected the tetragonality of the martensite, leading to lattice contraction and distortion, which increased internal stress and deformation potential. After aging treatment, the release of internal energy allowed for rapid diffusion of elements, enhancing the nucleation driving force of Ni 3 (Ti, Mo) and film-like reversed austenite, thereby increasing the density of precipitates and the volume fraction of austenite, reducing texture strength and improving the uniformity of the material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Progress and perspective of ultra-high strength steels having high toughness
2. Research and application progress in ultra-high strength stainless steel
3. Research and development of maragingstainless steel used for new generation landing gear
4. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
5. Cryogenic toughness in a low-cost austeniticsteel10.1038/s43246-021-00149-8 ↗
6. Cryogenic treatment of tool materials: a review10.1080/10426911003720862 ↗
7. Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments
8. Effects of the sub-zero treatment condition on microstructure, mechanical behavior and wear resistance of W9Mo3Cr4V high speed steel10.1016/j.wear.2012.12.037 ↗
9. Deep cryogenic treatment of AISI M2 tool steel and optimisation of its wear characteristics using Taguchi‘s approach10.1007/s13369-018-3242-y ↗
10. Effects of deep cryogenic treatment on the dry sliding wear performance of ferrous alloys10.1016/j.wear.2013.06.005 ↗
11. Effect of simultaneous magnetic field and deep cryogenic heat treatment on the microstructure of 1.2080 tool steel10.1016/j.matdes.2011.09.015 ↗
12. Deep cryogenic treatment of tool steels10.1016/j.jmatprotec.2015.09.045 ↗
13. Quantifying deep cryogenic treatment extent and its effect on steel properties
14. Effect of cryogenic treatment on wear behavior of Sleipner cold work tool steel10.1016/j.triboint.2023.108301 ↗
15. Comparative study of conventional and deep cryogenic treatment of AISI M3:2 (EN 1.3395) high-speed steel10.1016/j.jmrt.2020.09.071 ↗
16. Life time improvement of D7 tool steel by cryogenic treatment10.1016/j.matpr.2019.06.726 ↗
17. Influence of cryogenic treatment on the metallurgy of ferrous alloys: a review10.1080/10426914.2017.1317790 ↗
18. Martensitic transformation in rolled 301 stainless steel induced by cryogenic treatment
19. Low-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatment10.1016/j.actamat.2012.11.045 ↗
20. Deep cryogenic treatment of HPDC AZ91 magnesium alloys prior to aging and its influence on alloy microstructure and mechanical properties10.1016/j.jmatprotec.2016.08.029 ↗
21. Cryogenic thermal conductivity of 7050 aluminum alloy subjected to different heat treatments10.1016/j.cryogenics.2021.103305 ↗
22. Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy10.1016/j.matdes.2015.08.099 ↗
23. Quantification of the dislocation density, size, and volume fraction of precipitates in deep cryogenically treated martensitic steels10.3390/met10111561 ↗
24. Experimental verification of segregation of carbon and precipitation of carbides due to deep cryogenic treatment for tool steel by internal friction method10.1016/j.msea.2013.03.070 ↗
25. Change in the electron structure caused by C, N and H atoms in iron and its effect on their interaction with dislocations10.1016/j.actamat.2005.07.028 ↗
26. Role of eta-carbide precipitations in the wear resistance improvements of Fe-12Cr-Mo-V-1.4C tool steel by cryogenic treatment10.2355/isijinternational.34.205 ↗
27. Elucidating the role of secondary cryogenic treatment on mechanical properties of a martensitic ultra-high strength stainless steel10.1016/j.matchar.2021.111277 ↗
28. Effects of deep cryogenic treatment on microstructure, impact toughness and wear resistance of an AISI D6 tool steel
29. Effect of cryogenic treatment on the mechanical properties of 4340 steel10.1016/j.jmatprotec.2006.12.046 ↗
30. Metallurgical principles of cryogenically treated tool steels—a review on the current state of science10.1007/s00170-010-2935-5 ↗
31. Effect of cryogenic treatment on distribution of residual stress in case carburized En 353 steel10.1016/j.msea.2007.07.035 ↗
32. Influence of deep cryogenic treatment on the mechanical properties of AISI 440C bearing steel10.1016/j.proeng.2014.12.319 ↗
33. On the martensitic structure and hardness in as-quenched Fe-Ni alloys10.1016/j.jallcom.2017.08.285 ↗
34. Effect of cryogenic treatment on microstructure, mechanical and wear behaviors of AISI H13 hot work tool steel10.1016/j.cryogenics.2010.11.001 ↗
35. Caractérisation de Solides Cristallisés par Diffraction X, PE 1080, Tech-niques de l'Ingénieur
36. Effects of deep cryogenic treatment on the microstructure and mechanical properties of commercial pure zirconium10.1016/j.jallcom.2014.08.201 ↗
37. Cryogenic thermal conductivity of 7050 aluminum alloy subjected to different heat treatments10.1016/j.cryogenics.2021.103305 ↗
38. The reinforcement role of deep cryogenic treatment on the strength and toughness of alloy structural steel
39. Effect of deep cryogenic time on martensite multi-level microstructures and mechanical properties in AISI M35 high-speed steel10.3390/ma15196618 ↗
40. Effects of traditional heat treatment and a novel deep cryogenic treatment on microstructure and mechanical properties of low-carbon high-alloy martensitic bearing steel10.1007/s42243-020-00527-5 ↗
41. Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction10.1016/j.actamat.2017.09.030 ↗
42. Microstructure and properties of Ti55531 alloy subjected to deep cryogenic treatment10.1016/j.jmrt.2024.07.119 ↗
43. Mechanism of saturated flow stress during hot tensile deformation of a TA15 Ti alloy10.1016/j.matdes.2015.07.100 ↗
44. Effect of aging temperature on the microstructural evolution and mechanical properties of 18Ni (200) maraging steel10.1016/j.msea.2024.147497 ↗
45. Effects of deep cryogenic treatment on the microstructure and mechanical properties of an ultrahigh-strength TRIP-aided bainitic steel10.1016/j.matchar.2021.111247 ↗
46. Comparison of compositional and morphological atom-probe tomography analyses for a multicomponent Fe-Cu steel10.1017/S1431927607070675 ↗
47. Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging10.1016/j.msea.2018.07.012 ↗
48. Effect of quenching temperature on martensite multi-level microstructures and properties ofstrength and toughness in 20CrNi2Mo steel10.1016/j.msea.2016.08.065 ↗
49. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
50. Crack propagation mechanisms of AISI 4340 steels with different strength and toughness10.1016/j.msea.2018.05.056 ↗
51. Void growth by dislocation emission10.1016/j.actamat.2003.11.022 ↗
52. Segregation engineering enables nanoscale martensite to austenite phasetransformation at grain boundaries: a pathway to ductile martensite10.1016/j.actamat.2013.06.055 ↗
53. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation10.1016/j.actamat.2010.09.042 ↗
54. The evolution and toughening mechanism of austenite in high Co–Ni ultrahigh strength steel10.1016/j.jmrt.2024.10.031 ↗