journal article·2023-05Open access

Study on deviation distribution of Σ3 and Σ9 boundaries in Hastelloy C-276 superalloy with different hot rolling reductions

Shengli Guo, Xiaoyu Zhang, Jun Zhong, Shuaishuai Wu, Wei Jiang

Abstract

In this study, the deviation distributions of Σ3 and Σ9 grain boundaries in a Hastelloy C-276 sheet were measured using electron backscatter diffraction technology (EBSD) and the grain boundary plane orientation was analyzed using a five-parameter technique after hot rolling at 900 °C with different thickness reductions. The results show that the relative areas of Σ3 grain boundary planes reveal a strong peak at the (111) twist position, and the corresponding intensity significantly decreases as the reduction increases. The hot rolling generates dislocations, resulting in significant deviation of Σ3 grain boundary orientations and the loss of special properties. However, the Σ9 grain boundary plane distribution (GBPD) becomes more diffused with increasing deformation, and the multiples of random distribution (MRD) value is ∼2. In addition, the large deviation of the Σ9 grain boundary orientation varies across the different strain samples. In low-strain samples, the deviation of the Σ9 grain boundary orientation may be affected by the Σ3 grain boundary deviation with construction of the Σ3–Σ3–Σ9 triple junction. The deformation microstructures mainly determine the deviation of the Σ9 grain boundary orientation in high-strain samples. Moreover, the distorted grain boundaries act as potent nucleation sites of dynamic recrystallization (DRX) during the hot rolling process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Microstructure, mechanical and corrosion properties of TIG welded Hastelloy C-27610.3139/120.111559 ↗
2. Hot deformation characteristics and microstructure evolution of Hastelloy C-27610.1016/j.msea.2017.11.056 ↗
3. Hot deformation behavior of Hastelly C276 superalloy10.1016/S1003-6326(12)61688-4 ↗
4. Implication of grain boundary engineering on high temperature hot corrosion of alloy 61710.1016/j.corsci.2016.01.019 ↗
5. Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering10.1016/S1359-6454(02)00064-2 ↗
6. Grain boundary engineering for improving stress corrosion cracking of 304 stainless steel10.1080/02670836.2019.1570661 ↗
7. Improving intergranular corrosion resistance in a nickel-free and manganese-bearing high-nitrogen austenitic stainless steel through grain boundary character distribution optimization10.1016/j.corsci.2016.02.019 ↗
8. Grain boundary engineering and its implications on corrosion behavior of equiatomic CoCrFeMnNi high entropy alloy10.1016/j.jallcom.2021.161500 ↗
9. An approach to grain boundary design for strong and ductile polycrystals
10. Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials10.1016/S1359-6454(02)00090-3 ↗
11. Grain boundary character distribution and its effect on corrosion of Ni–23Cr–16Mo superalloy10.1179/1743284715Y.0000000142 ↗
12. Grain boundary evolution during low-strain grain boundary engineering achieved by strain-induced boundary migration in pure copper10.1016/j.msea.2021.142532 ↗
13. Grain boundary plane distributions in modified 316 LN steel exposed at elevated and cryogenic temperatures10.1007/s10853-007-1959-1 ↗
14. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
15. Effects of thermo-mechanical iterations on the grain boundary character distribution of Pb–Ca–Sn–Al alloy10.1016/j.msea.2006.09.034 ↗
16. Strain-annealed” grain boundary engineering process investigated in Hastelloy-X10.1016/j.mtla.2019.100544 ↗
17. Effects of initial microstructure on the grain boundary network during grain boundary engineering in Hastelloy N alloy10.1016/j.jallcom.2017.02.009 ↗
18. Hot deformation characteristics and processing map of nickel-based C276 superalloy10.1016/j.jallcom.2014.10.118 ↗
19. An investigation on constitutive relation and dynamic recrystallization of Hastelloy C-276 alloy during hot deformation10.1007/s11665-020-05057-5 ↗
20. Effect of deformation parameters on twinning evolution during hot deformation in a typical nickel-based superalloy10.1016/j.msea.2017.04.077 ↗
21. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
22. Measuring the five-parameter grain-boundary distribution from observations of planar sections10.1007/s11661-004-0147-z ↗
23. Effect of twin boundaries on the microstructure and mechanical properties of Inconel 625 alloy10.1016/j.msea.2019.138361 ↗
24. Methods for quantitative characterization of three-dimensional grain boundary networks in polycrystalline materials, polish academy of sciences
25. The five-parameter grain boundary character and energy distributions of a fully austenitic high-manganese steel using three-dimensional data10.1016/j.actamat.2014.02.038 ↗
26. Atomistic simulations of grain boundary energies in tungsten10.1016/j.matlet.2016.09.104 ↗
27. Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel10.1016/j.msea.2014.11.053 ↗
28. Changes in the five-parameter grain boundary character distribution in α-brass brought about by iterative thermomechanical processing10.1016/j.actamat.2006.05.035 ↗
29. Abnormal dynamic recrystallization behavior of a nickel based superalloy during hot deformation10.1016/j.jallcom.2019.02.055 ↗
30. Microevolution of grain boundary character distribution in Hastelloy C-276 during the annealing process10.1016/j.jmrt.2022.03.056 ↗
31. Effect of twin nucleation and twin on the recrystallization of a nickel-based superalloy during hot compression10.1016/j.matchar.2022.112362 ↗
32. Hot deformation characterization of nickel-based superalloy UNS10276 through processing map and microstructural studies10.1016/j.jallcom.2016.10.029 ↗
33. Use of hot rolling for generating low deviation twins and a disconnected random boundary network in Inconel 600 alloy10.1007/s11661-017-4431-0 ↗
34. Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 71810.1016/j.msea.2016.09.100 ↗
35. Effect of deformation parameters on twinning evolution during hot deformation in a typical nickel-based superalloy10.1016/j.msea.2017.04.077 ↗
36. Dynamic recrystallization of austenite in Ni-30 PCT Fe model alloy: microstructure and texture evolution10.1007/s11661-009-9799-z ↗
37. The role of Σ9 boundaries in grain boundary engineering10.1007/s11661-010-0302-7 ↗
38. Viewpoint on the formation and evolution of annealing twins during thermomechanical processing of FCC metals and alloys10.1007/s11661-020-05772-7 ↗
39. Effect of hot rolling reduction and annealing treatment on grain boundary character distribution in austenitic low-density Fe-Mn-Al-C-Cr steel10.1016/j.matlet.2020.128999 ↗