journal article·2024-05Open access

Enhanced mechanical properties of thermo-mechanically affected zone of friction-stir welded AZ61 magnesium alloy joint

N. Xu, Z.H. Qiu, B.K. Gu, Z.Y. Liu, S.Y. Zhu, Q.N. Song, D. Wang, J. Shen

Abstract

Friction-stir welded (FSW) magnesium alloy joints frequently fracture at thermo-mechanically affected zone (TMAZ), and the joints exhibit unsatisfactory welding efficiency and ductility. The TMAZ is considered as the weakest region of the entire joint. Enhance the mechanical properties of TMAZ can improve the performance of the welded joint. In this work, subsequent aging treatment and pre-strain of 3% along the weld seam were conducted on the FSW AZ61 magnesium alloy joint. The microstructure of the TMAZ is characterized by abundant nanoscale second phase particles and {10-12} twins. The reduced basal texture intensity decreased the anisotropy of plastic deformation. The welded joint showed a good synergic of welding efficiency (96%) and ductility (20%). The enhanced strength is attributed to the blocking effect of nanoscale particles and grain/twin boundaries to dislocation movement. The increasing of twin boundaries is the main reason for the improvement of work hardening ability and ductility during tensile deformation. This work demonstrated that introducing {10-12} twins and nanoscale particles into TMAZ is an effective way to improve the balance of strength and ductility of the welded joint due to the synergistic effect of multiple strengthening and toughening mechanisms.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution10.1016/j.pmatsci.2020.100752 ↗
2. Friction stir welding of CoCrNi medium-entropy alloy: recrystallization behaviour and strengthening mechanism10.1016/j.msea.2022.143361 ↗
3. Microstructure and mechanical properties of bobbin tool friction stir welded ZK60 magnesium alloy10.1016/j.msea.2020.138953 ↗
4. Improving the mechanical properties of a friction stir welded AZ31 joint by adjusting the microstructure and texture10.1016/j.jmrt.2022.10.063 ↗
5. Microstructure and mechanical properties of AZ31B Mg alloy fabricated by friction stir welding with pulse current10.1016/j.jmapro.2021.09.031 ↗
6. Fine grained Mg–3Al–1Zn alloy with randomized texture in the double-sided friction stir welded joints10.1016/j.msea.2013.05.044 ↗
7. Large load friction stir welding of Mg–6Al–0.4Mn–2Ca magnesium alloy10.1080/02670836.2018.1424794 ↗
8. Improvement of yield stress of friction-stirred Mg–Al–Zn alloys by subsequent compression10.1016/j.scriptamat.2007.01.041 ↗
9. Changes in texture and microstructure of friction stir welded Mg alloy during post-rolling and their effects on mechanical properties10.1016/j.msea.2013.06.005 ↗
10. Controlling the recrystallization behavior of a Mg–3Al–1Zn alloy containing extension twins10.1016/j.msea.2014.11.027 ↗
11. Microstructural and mechanical behaviour evaluation of Mg-Al-Zn alloy friction stir welded joint10.15282/ijame.17.3.2020.08.0612 ↗
12. Influence of annealing treatment on microstructure evolution and mechanical property of friction stir weld AZ31 Mg alloys10.1007/s11595-019-2068-0 ↗
13. Friction stir welding of as-extruded Mg–Al–Zn alloy with higher Al content. Part II: influence of precipitates10.1016/j.matchar.2014.08.001 ↗
14. Improvement in the strength of friction-stir-welded ZK60 alloys via post-weld compression and aging treatment10.1016/j.msea.2017.12.008 ↗
15. Improvement of microstructure and mechanical properties of AZ61 Mg alloys subjected to rapid cooling friction stir welding10.1080/13621718.2021.1957630 ↗
16. Improved microstructure and mechanical properties of friction stir-welded AZ61 Mg alloy joint10.1016/j.jmrt.2022.03.160 ↗
17. The role of {10–12} tensile twinning in plastic deformation and fracture prevention of magnesium alloys10.1016/j.msea.2022.143678 ↗
18. Effect of {10−12} twinning on the deformation behavior of AZ31 magnesium alloy10.1016/j.msea.2019.01.021 ↗
19. Simultaneous enhancement of strength and ductility in friction stir welded AZ31 alloy via multi-pass hot-rolling and subsequent annealing10.1016/j.jmrt.2023.02.147 ↗
20. Improved properties of friction stir-welded AZ31 magnesium alloy by post-weld heat treatment10.1080/02670836.2016.1243356 ↗
21. Unveiling the enhanced mechanical properties of friction stir welded AZ31 joint by pre-ultrasonic surface rolling10.1016/j.jmrt.2022.08.081 ↗
22. Effect of post-weld heat treatment on mechanical properties of local weld-affected zones in friction stir welded AZ31 plates10.1016/j.msea.2021.140809 ↗
23. Assessment of self-reacting bobbin tool friction stir welding for joining AZ31 magnesium alloy at inert gas environment10.1016/j.jma.2019.05.011 ↗
24. Effects of tool rotational and welding speed on microstructure and mechanical properties of bobbin-tool
25. Effect of Ca addition on the microstructure and the mechanical properties of asymmetric double-sided friction stir welded AZ61 magnesium alloy10.1016/j.jma.2020.02.001 ↗
26. Improved microstructure and mechanical properties of friction stir-welded AZ61 Mg alloy joint10.1016/j.jmrt.2022.03.160 ↗
27. Macrostructure, microstructure and mechanical properties of bobbin tool friction stir welded ZK60 Mg alloy joints10.1016/j.jmrt.2020.05.067 ↗
28. Microstructure and mechanical properties of carbon nano-onions reinforced Mg-based metal matrix composite prepared by friction-stir processing
29. Roles of reinforcements in twin nucleation and nano-α precipitation in the hybrid TiB/TiC-reinforced titanium matrix composites during high-temperature fatigue10.1016/j.scriptamat.2021.113758 ↗
30. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
31. Effect of dislocation-twin boundary interaction on deformation by twin boundary migration10.1016/j.msea.2016.03.061 ↗