Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process
Source abstract
Abstract
Introducing CO 2 during the mixing process of filling slurry for wet carbonation enables simultaneous carbonation and hydration reactions of the carbonated filling slurry (CSL). This study evaluates the microstructural evolution and strength development of carbonated cemented paste backfill (CCPB) under different carbonation times, and discusses the carbonation products and carbon sequestration of CCPB. The results reveal that introducing 99% pure CO 2 at a flow rate of 1 L/min for 10 min into the filling slurry in a non-sealed container effectively optimizes the microscopic pore structure and mechanical properties of CCPB, achieving a carbon sequestration rate of 6.42%. Short-term carbonation leads to a continuous decrease in the T 2 relaxation signal of CSL in the early hydration stage, enhancing pore structure by converting secondary pores to micropores. The main carbonation product is calcite crystalline CaCO 3 , which forms a dense carbonation layer on the surface of the tailings particles. However, prolonged carbonation results in the formation of microscopic pore encapsulation layer, hindering further CO 2 diffusion, reducing carbonation efficiency, and deteriorating the mechanical properties of CCPB. With a carbonation time of 10 min, the UCS and EM of CCPB with different cement-to-tailings ratios show significant improvement, and the specimens exhibit lower fragmentation and fewer secondary cracks, maintaining better integrity after failure. In conclusion, the wet carbonation of filling slurry not only enhances the strength of the filling material but also achieves the reutilization of gaseous and solid wastes through carbon sequestration filling method, providing an efficient and eco-friendly solution for mine backfilling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Tailings Management and Properties · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Toward carbon neutrality in China: a national wide carbon flow tracing and the CO2 emission control strategies for CO2-intensive industries10.1016/j.scitotenv.2023.163009 ↗
2. China's diverse energy transition pathways toward carbon neutrality by 206010.1016/j.spc.2024.04.007 ↗
3. Progress, challenge and significance of building a carbon industry system in the context of carbon neutrality strategy10.1016/S1876-3804(22)60382-3 ↗
4. Key engineering technologies to achieve green, intelligent, and sustainable development of deep metal mines in China
5. Current status and development strategy of metal mines
6. Advancing toward sustainability: the emergence of green mining technologies and practices10.1016/j.gsme.2024.05.005 ↗
7. Key theory and technology of cemented paste backfill for green mining of metal mines. Green and Smart Mining
8. Dual adoption opportunities and prospects for mining and industrial waste recovery through an integrated carbon capture, utilization and storage10.1016/j.spc.2024.05.012 ↗
9. Mechanical response of stress damaged cemented tailings backfill based on pore structure and acoustic emission characteristics10.1016/j.conbuildmat.2023.133278 ↗
10. Effect of rice husk ash (RHA) dosage on pore structural and mechanical properties of cemented paste backfill10.1016/j.jmrt.2022.01.044 ↗
11. Internal pore evolution and early hydration characterization of fly ash cement backfill
12. Mineral waste recycling, sustainable chemical engineering, and circular economy10.1016/j.rineng.2024.101865 ↗
13. The utilization of alkaline wastes in passive carbon capture and sequestration: promises, challenges and environmental aspects10.1016/j.scitotenv.2022.153553 ↗
14. Review on recent advances in CO2 utilization and sequestration technologies in cement-based materials10.1016/j.conbuildmat.2016.10.017 ↗
15. Accelerated carbonation – a potential approach to sequester CO2 in cement paste containing slag and reactive MgO10.1016/j.cemconcomp.2013.07.001 ↗
16. Macroscopic behavior and microscopic structure of serpentine-MgO carbon sequestration foamed concrete
17. The synergistic mechanism of hydration regulation and carbonation curing on the carbon sequestration and impermeability enhancement of cementitious materials
18. Preparation of reactive urchin-like recycled concrete aggregate by wet carbonation: towards improving the bonding capability of the interfacial transition zone in recycled aggregate concrete10.1016/j.cemconcomp.2023.105235 ↗
19. Effect of moisture content on properties, microstructure and carbon sequestration of CO2-cured cement mortar mixed with chelator
20. Carbon dioxide utilization in concrete curing or mixing might not produce a net climate benefit10.1038/s41467-021-21148-w ↗
21. Effects of sufficient carbonation on the strength and microstructure of CO2-cured concrete
22. Mechanism for rapid hardening of cement pastes under coupled CO2-water curing regime10.1016/j.cemconcomp.2018.12.021 ↗
23. Determination of the hydration and carbonation kinetics of CaO for low-temperature applications10.1016/j.ces.2024.120146 ↗
24. Mechanism of interaction between hydration–carbonation of C2S10.1016/j.conbuildmat.2024.134891 ↗
25. Wet carbonation of C3A and pre-hydrated C3A10.1016/j.cemconres.2023.107259 ↗
26. Mechanisms of carbonation hydration hardening in Portland cements10.1016/j.cemconres.2021.106687 ↗
27. Role of magnesium acetate in hydration and carbonation of magnesium oxide-based cements10.1016/j.cemconres.2023.107357 ↗
28. The influence of reactive MgO on the hydration and carbonation performance of slag-rich cement system
29. Effect of steam on CaO regeneration, carbonation and hydration reactions for CO2 capture10.1016/j.fuproc.2016.05.019 ↗
30. Development of Ultra-High Performance Concrete (UHPC) matrix based on recycled concrete fines subjected to coupling curing of microwave and wet carbonation
31. Effect of temperature on wet carbonation products of magnesium slag10.1016/j.conbuildmat.2024.135949 ↗
32. Properties and durability of concrete produced using CO2 as an accelerating admixture10.1016/j.cemconcomp.2016.10.007 ↗
33. Effects of calcium carbide slag on properties and carbon sequestration efficiency of cement pastes mixed under direct CO2 injection conditions10.1016/j.jcou.2024.102835 ↗
34. Mechanical behavior, acoustic emission and principal strain field evolution properties of layered cemented paste backfill under unconfined compression10.1016/j.conbuildmat.2024.135111 ↗
35. Energy and deformation field evolution characteristics of layered cemented paste backfill under cyclic loading and unloading
36. Strengthening mechanism of granulated blast-furnace slag on the uniaxial compressive strength of modified magnesium slag-based cemented backfilling material10.1016/j.psep.2023.04.031 ↗
37. Effect of employing carbon sequestration technologies while using electric arc furnace ash in cementitious binder10.1016/j.jobe.2024.110192 ↗
38. Carbon sequestration effects in cementitious composite binder materials under accelerated carbonation: a review
39. Evaluation on direct aqueous carbonation of industrial/mining solid wastes for CO2 mineralization10.1016/j.jiec.2023.02.036 ↗
40. Carbonation curing of magnesium-coal slag solid waste backfill material: study on properties of flow, mechanics and carbon sequestration
41. Constructing artificial cover layers for supercritical carbon dioxide sequestration: a novel approach to old goaf remediation and carbon emission reduction10.1016/j.eti.2024.103714 ↗
42. The carbon uptake and mechanical property of cemented paste backfill carbonation curing for low concentration of CO2
43. Innovative synthesis of low-carbon cemented backfill materials through synergistic activation of solid wastes: an integrated assessment of economic and environmental impacts
44. Carbonation curing of modified magnesium-coal based solid waste backfill material for CO2 sequestration10.1016/j.psep.2023.10.049 ↗
45. Study on the effect of reinforced recycled aggregates on the performance of recycled concrete--synergistic effect of cement slurry-carbonation
46. Performance of cementitious materials prepared with magnesium slag and concrete slurry waste
47. CO2 sequestration by wet carbonated magnesium slag with high-content aragonite whiskers for improving cement performance as underground filling material10.1016/j.jiec.2024.05.064 ↗
48. Enhancing fly ash utilization in backfill materials treated with CO2 carbonation under ambient conditions10.1016/j.ijmst.2023.02.001 ↗
49. Characteristics of overburden migration under continuous extraction and continuous backfill mining method with CO2 mineralized filling materials10.1016/j.jclepro.2024.140920 ↗
50. Quantitative characterization of the early hydration of magnesium potassium phosphate cement: in-situ experiment with low field NMR10.1016/j.conbuildmat.2023.131066 ↗
51. Effect of waste glass powder on pore structure, mechanical properties and microstructure of cemented tailings backfill10.1016/j.conbuildmat.2022.130062 ↗
52. Comprehensive analysis of early-stage hydration and microstructure evolution in Sufflaminate cement: insights from low-field NMR and isothermal calorimetry
53. Hydration characteristics and mechanism analysis of β-calcium sulfate hemihydrate based on low-field NMR
54. Interpretable machine learning-based analysis of hydration and carbonation of carbonated reactive magnesia cement mixes10.1016/j.jclepro.2023.140054 ↗
55. Theoretical basis and technical of carbon dioxide backfill in coal mine
56. Pore structure characterization based on NMR experiment: a case from the Shanxi Formation tight sandstones in the Daning-Jixian area, eastern Ordos Basin10.1016/j.engeos.2023.100192 ↗
57. A discussion of the paper “Dynamic microstructural evolution of hardened cement paste during first drying monitored by 1H NMR relaxometry” by I. Maruyama, T. Ohkubo, T. Haji et al.10.1016/j.cemconres.2019.105928 ↗
58. Investigation of hydration and setting process in nanosilica-cement blended pastes: in situ characterization using low field nuclear magnetic resonance10.1016/j.conbuildmat.2021.124631 ↗
59. Insight into the early hydration characteristics of Portland cement with hydroxyethyl methyl cellulose highlighted by 1H low-field NMR10.1016/j.conbuildmat.2024.135904 ↗
60. Influence of shell ash on pore structure and mechanical characteristics of cemented tailings backfill10.1016/j.conbuildmat.2023.134473 ↗
61. Aragonite–calcite–vaterite: a temperature influenced sequential polymorphic transformation of CaCO3 in the presence of DTPA10.1016/j.materresbull.2013.01.048 ↗
62. Simulation of calcium carbonate nucleation processes in confined C-S-H nanopores with different calcium-silicon ratios10.1016/j.conbuildmat.2024.137157 ↗
63. Elucidating deposition process of calcium carbonate and mechanical properties of precipitation via molecular dynamics simulation
64. Hydration kinetics, pore structure, 3D network calcium silicate hydrate, and mechanical behavior of graphene oxide reinforced cement composites10.1016/j.conbuildmat.2018.09.105 ↗
65. Multiscale performance and environmental impact assessment of slag and Portland blended cement for optimum carbonation curing10.1016/j.cement.2023.100088 ↗
66. The influence of carbon dioxide concentration on carbonation behavior in cement paste
67. Effects of carbonation on micro structures of hardened cement paste10.1007/s11595-016-1344-5 ↗
68. Wet grinding carbonation technique: achieving rapid carbon mineralization of concrete slurry waste under low CO2 flow rate10.1016/j.cej.2024.152836 ↗