journal article·2024-11Open access

Improving mechanical properties of Mg–Zn-Nd-Zr alloy by low alloying with Yb and corresponding strengthening mechanisms

Zhaobin Zhang, Jonghyun Kim, Heng Pu, Shuai Zhou, Yaobo Hu, Guangsheng Huang, Bin Jiang, Fusheng Pan

Abstract

This study was aim to explore the possibility of adding Yb element to Mg–6Zn-3Nd-0.5Zr alloy to develop a commercial high-strength Mg alloy under the condition of low rare earth content. A systematic investigation was conducted and it was shown that the phase compositions were changed by the Yb addition (0–2 wt%). The Mg–Zn phases disappeared while a new phase, (Nd,Yb)Zn 2 , were formed. The volume fractions of precipitates increased with increasing Yb content. Due to the extra precipitation through the process of extrusion, the volume fractions of precipitates of as-extruded alloys were slightly higher than that of the as-cast alloys. All as-extruded alloys displayed the same strong fiber texture with the (10 1 ‾ 0) perpendicular and the [ 1 ‾ 100] parallel to the extrusion direction. The Yb addition improved the DRX degree, but has little effect on grain orientations, and adjusted the texture intensities by influencing DRX process. When the Yb content is 1.0 wt%, the alloy showed best mechanical properties, with the yield strength and ultimate tensile strength of 400 MPa and 407 MPa. The high strength is the result of the combined effects of excellent grain boundary and texture strengthening.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Magnesium research and applications: past, present and future10.1016/j.jma.2023.11.007 ↗
2. A comparative study of deformation behaviors and ductility improvement in Mg–Gd–Zr and Mg–Zr cast alloys10.1016/j.jmrt.2023.08.052 ↗
3. Enhancing mechanical properties of Mg-Gd-Y-Zn alloys via microalloying with Ce and La10.3365/KJMM.2022.60.9.654 ↗
4. Towards strength-ductility synergy in a weak-textured Mg–3Y extruded sheet via pre-twinning and annealing10.1016/j.msea.2023.145812 ↗
5. Microstructure, deformation, and property of wrought magnesium alloys10.1007/s11661-020-05974-z ↗
6. Uncovering of the formation of rare earth texture and pseudo fiber bimodal microstructure in the high ductility Mg-2Gd-0.4Zr alloy during extrusion10.1016/j.jmst.2023.06.055 ↗
7. The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy10.1016/j.actamat.2018.10.005 ↗
8. Grain refinement and strength enhancement in Mg wrought alloys: a review10.1016/j.jma.2023.11.002 ↗
9. Ultrafine-grained Mg alloy: preparation, properties, design strategy10.1016/j.jmrt.2024.02.131 ↗
10. Effect of extrusion process on the mechanical and in vitro degradation performance of a biomedical Mg-Zn-Y-Nd alloy
11. Ultra-high tensile strength induced by multiple precipitates in extruded ZK60 alloy via co-alloying Ca and Er10.1016/j.jallcom.2023.172680 ↗
12. Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloys10.1016/j.actamat.2022.118550 ↗
13. Effects of Sm addition on microstructure evolutions and mechanical properties of high-strength Mg–Gd−Sm–Zr extruded alloys10.1016/j.msea.2021.142264 ↗
14. Effect of substituting Y with Gd on LPSO phase dispersion and mechanical properties of Mg-2Ni-2Y alloy10.1007/s12540-023-01527-2 ↗
15. Formation mechanism of the abnormal texture during extrusion in Mg-Y-Sm-Zn-Zr alloy10.1016/j.jallcom.2019.153477 ↗
16. Microstructures and mechanical properties of a hot-extruded Mg−8Gd−3Yb−1.2Zn−0.5Zr (wt%) alloy10.1016/j.jallcom.2018.10.322 ↗
17. Effect of substitution of Zn with Ni on microstructure evolution and mechanical properties of LPSO dominant Mg–Y–Zn alloys10.1016/j.msea.2019.138735 ↗
18. Investigation on the microstructure, texture and mechanical properties of Mg-Gd-Y(-Zn)-Zr alloys under indirect extrusion10.1016/j.jallcom.2023.169061 ↗
19. Ultrahigh strength Mg-Y-Ni alloys obtained by regulating second phases10.1016/j.jmst.2019.11.026 ↗
20. Simultaneously improving mechanical and anti-corrosion properties of extruded Mg-Al dilute alloy via trace Er addition10.1016/j.jmst.2022.12.014 ↗
21. Effect of Sn microalloying on microstructure and mechanical properties of Mg-11Gd-1Zn-0.5Zr alloy10.1016/j.msea.2023.146018 ↗
22. A super high-strength Mg-Gd-Y-Zn-Mn alloy fabricated by hot extrusion and strain aging10.1016/j.matdes.2019.107666 ↗
23. Achieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatment10.1016/j.msea.2020.139635 ↗
24. Effect of Yb addition on the microstructure and mechanical properties of the Mg–4Sm–3Gd–0.5Zr alloy
25. Microstructure evolution and enhanced fatigue behavior in the Mg-10Li-5Zn-0.5Er alloys micro-alloyed with Yb
26. Synergistic enhancement of strength and plasticity in Mg-4.0Zn-1.5Mn magnesium alloy by minor Yb addition10.1016/j.msea.2024.146237 ↗
27. Effects of Nd content on the microstructures and mechanical properties of ZK60 Mg alloy and corresponding strengthening mechanisms10.1016/j.msea.2024.146504 ↗
28. Enhancing mechanical properties and microstructure evolution of hybrid AZ61-5SiC-0.5CNTs composite during equal channel angular pressing10.1016/j.jallcom.2024.175112 ↗
29. High-strength Mg-6Li-3Al-0.4Ce alloy fabricated by rotary swaging10.1016/j.scriptamat.2023.115954 ↗
30. Formation of nanocrystalline AZ31B Mg alloys via cryogenic rotary swaging10.1016/j.jma.2021.11.021 ↗
31. High-strength Mg-6Li-3Al-0.4Ce alloy fabricated by rotary swaging10.1016/j.scriptamat.2023.115954 ↗
32. Simultaneous enhancement of strength and ductility in nonflammable Mg alloys through dynamic precipitation using severe plastic deformation under high pressure10.1016/j.msea.2023.145395 ↗
33. Achieving excellent ductility in high-strength Mg-10.6Gd-2 Ag alloy via equal channel angular pressing10.1016/j.jallcom.2019.152688 ↗
34. Influence of various initial microstructures on microstructure and mechanical property of ECAP processed Mg-8.4Li-3.58Al-0.36Si-0.05Ti-0.01B alloys10.1016/j.msea.2022.144022 ↗
35. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
36. Research advances in magnesium and magnesium alloys worldwide in 202010.1016/j.jma.2021.04.001 ↗
37. Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys10.1016/j.jmst.2020.05.021 ↗
38. Optimization of microstructure and mechanical property of a Mg-Zn-Y-Nd alloy by extrusion process10.1016/j.jallcom.2018.10.167 ↗
39. Combined effects of LPSO orientation and α-Mg texture on tensile anisotropy of an extruded Mg-Gd-Y-Zn-Zr alloy10.1016/j.msea.2020.140596 ↗
40. Improved workability and ductility of the Mg-Gd-Y-Zn-Zr alloy via enhanced kinking and dynamic recrystallization10.1016/j.jallcom.2018.03.359 ↗
41. Characteristic zirconium-rich coring structures in Mg–Zr alloys10.1016/S1359-6462(02)00046-5 ↗
42. Synergistic enhancement of strength and plasticity in Mg-4.0Zn-1.5Mn magnesium alloy by minor Yb addition10.1016/j.msea.2024.146237 ↗
43. Hot workability and microstructure of Mg–6.0 Zn–2.0 Yb–0.5 Zr magnesium alloy10.1016/j.jallcom.2022.168356 ↗
44. In vitro degradation behavior and biocompatibility of Mg–5.8 Zn–2.0 Yb–0.5 Zr alloy during aging treatment10.1016/j.matlet.2020.128682 ↗
45. Ultrafine-grained Mg–Zn–Yb–Zr alloy with simultaneously improved strength and ductility processed by axisymmetric hot extrusion10.1016/j.vacuum.2019.109157 ↗
46. Effects of extrusion ratio and temperature on the microstructure and mechanical properties of Mg–Zn–Yb–Zr extrusion alloys10.1016/j.msea.2021.142521 ↗
47. Effect of Yb addition on the microstructure and mechanical properties of ZK60 alloy during extrusion10.1016/j.msea.2020.139033 ↗
48. On the micromechanism of superior strength and ductility synergy in a heterostructured Mg-2.77Y alloy
49. Mechanism of high-strength and ductility of Mg-RE alloy fabricated by low-temperature extrusion and aging treatment10.1016/j.matdes.2020.109384 ↗
50. The microstructural features and strengthening mechanisms of Mg-Al-Zn-Ca-(RE) extruded alloys having high-volume fractions of second-phase particles10.1016/j.msea.2023.144765 ↗
51. Microstructure and strengthening mechanism of hot-extruded ultralight Mg-Li-Al-Sn alloys with high strength10.1016/j.jmst.2021.07.009 ↗
52. Simultaneously improving mechanical and anti-corrosion properties of extruded Mg-Al dilute alloy via trace Er addition10.1016/j.jmst.2022.12.014 ↗
53. Role of extrusion rate on the microstructure and tensile properties evolution of ultrahigh-strength low-alloy Mg-1.0Al-1.0Ca-0.4Mn (wt.%) alloy10.1016/j.jma.2021.05.010 ↗
54. Dynamic recrystallization behavior and strengthening mechanism of Mg–Gd–Y–Zn–Zr alloy during isothermal MDF process10.1016/j.jmrt.2022.09.121 ↗
55. Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys10.1016/j.jallcom.2009.02.131 ↗
56. Extra-conventional strengthening mechanisms in non-recrystallized grains of an extruded Mg-Gd-Zr alloy10.1016/j.jma.2023.09.024 ↗
57. Microstructure, texture and mechanical properties of Mg-3.0Zn-0.2Ca alloys fabricated by extrusion at various temperatures10.1016/j.jallcom.2015.08.215 ↗
58. Deformation mode and strengthening mechanism of Mg-Gd-Er-Zn-Zr alloy with different LPSO morphology10.1016/j.jallcom.2024.174524 ↗
59. Strengthening mechanism and interaction between nano precipitates and defects in wrought Mg-5Li-1Zn-0.5Ag-0.5Zr-xGd alloys10.1016/j.matchar.2024.113911 ↗
60. Microstructure evolution and strengthening mechanisms of high-strength Mg-5Al-1Mn-0.5Zn-0.5Ca by rotary forging10.1016/j.jallcom.2024.173721 ↗
61. Bimodal grain structure formation and strengthening mechanisms in Mg-Mn-Al-Ca extrusion alloys10.1016/j.jma.2022.12.012 ↗
62. Precipitate characteristics and precipitation-strengthening mechanism of Mg-13Gd-4Y–2Zn-0.6Zr alloy10.1016/j.jmrt.2023.02.142 ↗