Laser directed energy deposition remanufacturing of LPBF-processed TA15 parts: Hybrid process interface induced microstructure inheritance and mechanical performance
Source abstract
Abstract
The laser additive hybrid manufacturing technology, which combines the precision of Laser Powder Bed Fusion (LPBF) and the flexibility of Laser Directed Energy Deposition (LDED), provides an effective solution for efficient forming and remanufacturing of large, complex components. The bonding zone (BZ) between LPBF and LDED forming regions is crucial for the final component performance. This study utilized LDED to remanufacture annealed LPBF substrates and investigated the microstructure and mechanical properties of TA15 alloy remanufactured parts. Results shows that a gradient microstructure forms at the bonding zone (BZ), where the bottom region exhibits a mixed structure including transitional β phase (β t ), lamellar α and secondary α phase (α s ). The top region shows a "ghost structure" of fine needle-like α phases. The mechanical property matched the microstructure well, as the hardness in the upper BZ reaches up to 463 MPa, whereas the LFZ exhibits the lowest hardness at 401 MPa. As the angle between the LDED region edge and tensile direction increases, the tensile strength first increases and then stabilizes, while elongation increases initially and then decreases. At a tilt angle of 60°, the strength peaks at 1098 MPa; at a 30° angle, the elongation reaches a maximum of 10.336%. All samples fracture at the LPBF zone, indicating that the formation of fine lamellar α phases in the BZ contributes to its higher strength compared to LPBF substrate and LDED deposition zones.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Development of high strength and lightweight Ti6Al4V5Cr alloy: microstructure and mechanical characteristics10.1016/j.jmrt.2023.12.271 ↗
2. Surface morphology, roughness, and corrosion resistance of dental implants produced by additive manufacturing10.1016/j.jmrt.2022.10.114 ↗
3. Hybrid manufacturing approach for landing gear applications: WAAM Ti-6Al-4V on forged Ti–5Al–5Mo–5V–3Cr10.1016/j.jmrt.2024.05.088 ↗
4. Effect of friction conditions on phase transformation characteristics in hot forging process of Ti-6Al-4 V turbine blade10.1016/j.jmrt.2019.12.041 ↗
5. Elasto-plastic bending behavior of Ti-6Al-4V alloy under coupling conditions of elevated temperature and combined tension-bending10.1016/j.jmrt.2023.08.200 ↗
6. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V10.1016/j.actamat.2010.02.004 ↗
7. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting10.1016/j.matdes.2016.06.117 ↗
8. Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
9. Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy10.1016/j.matchar.2019.02.010 ↗
10. Microstructure and mechanical properties of Ti-6.5Al-2Zr-Mo-V alloy processed by Laser Powder Bed Fusion and subsequent heat treatments
11. Microstructure and mechanical evolution behavior of LPBF (laser powder bed fusion)-fabricated TA15 alloy10.1016/j.jallcom.2021.159639 ↗
12. Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness10.1016/j.actamat.2018.09.064 ↗
13. Recent innovations in laser additive manufacturing of titanium alloys10.1088/2631-7990/ad2545 ↗
14. Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening
15. Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology
16. An approach to improve the microstructure and mechanical properties: a hybrid manufacturing of laser directed energy deposition and shot peening
17. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
18. Enhanced mechanical properties of Ti6Al4V alloy fabricated by laser additive manufacturing under static magnetic field10.1080/21663831.2022.2064195 ↗
19. Microstructure and mechanical properties of forging-additive hybrid manufactured Ti-6Al-4V alloys10.1016/j.msea.2021.140984 ↗
20. Heterogeneous microstructure of the bonding zone and its dependence on preheating in hybrid manufactured Ti-6Al-4V10.1080/21663831.2021.1958947 ↗
21. Microstructure and mechanical properties of LMD-SLM hybrid forming Ti6Al4V alloy10.1016/j.msea.2016.02.069 ↗
22. Selective laser melting-wire arc additive manufacturing hybrid fabrication of Ti-6Al-4V alloy: microstructure and mechanical properties10.1016/j.msea.2016.12.065 ↗
23. Microstructure homogenizations of Ti-6Al-4V alloy manufactured by hybrid selective laser melting and laser deposition manufacturing10.1016/j.msea.2019.05.049 ↗
24. Regionalization of microstructure and mechanical properties of Ti6Al4V transition area fabricated by WAAM-LMD hybrid additive manufacturing10.1016/j.jallcom.2022.167345 ↗
25. Transformation kinetics and microstructures of Ti17 titanium alloy during continuous cooling10.1016/j.msea.2006.10.024 ↗
26. Microstructure and tensile properties of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy10.1016/j.msea.2013.08.032 ↗
27. Development of a pre-heat treatment for obtaining discontinuous grain boundary α in laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.msea.2014.03.028 ↗
28. Nucleation and growth mechanism of alpha-lamellae of Ti alloy TA15 cooling from an alpha+beta phase field10.1016/j.actamat.2012.12.025 ↗
29. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium10.1016/S0031-8914(34)80244-3 ↗
30. Evolution of solidification texture during additive manufacturing10.1038/srep16446 ↗
31. Mechanical properties and microstructural evolution of TA15 Ti alloy processed by selective laser melting before and after annealing10.1016/j.msea.2019.138742 ↗
32. Specific heat treatment of selective laser melted Ti-6AI-4V for biomedical applications10.1007/s11706-015-0315-7 ↗
33. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting10.1007/s11661-011-0731-y ↗
34. Temperature-gradient induced microstructure evolution in heat-affected zone of electron beam welded Ti-6Al-4V titanium alloy10.1016/j.jmst.2019.04.004 ↗
35. Microstructure and mechanical properties of friction- and electron-beam welded Ti-6Al-4V and Ti-6Al-2Sn-4Zr-6Mo10.1016/j.msea.2012.05.087 ↗
36. Effects of direct aging on near-alpha Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)10.1016/j.msea.2020.139533 ↗
37. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
38. Characterization of texture and grain boundary character distributions of selective laser melted Inconel 625 alloy10.1016/j.matchar.2018.02.008 ↗
39. The influence of building parameters on residual stress, interfacial structure, and cracking control of laser powder bed fusion processed Ti6Al4V/AlMgScZr multi-material parts10.1016/j.jmatprotec.2024.118479 ↗
40. Theoretical assessment on the phase transformation kinetic pathways of multi-component Ti alloys: application to Ti-6Al-4V10.1007/s11669-015-0436-9 ↗
41. The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy10.1016/0956-7151(91)90177-3 ↗
42. Martensite stabilization in a high temperature Ni-Mn-Ga alloy10.1016/j.scriptamat.2005.04.009 ↗
43. Revealing grain structure development and texture evolution during elastic stress-assist aging of Mg–Zn alloys10.1016/j.jallcom.2021.160474 ↗