Interface characteristics and mechanical behavior of aluminum alloy/ ultrahigh-strength steel plasma arc welded joint
Source abstract
Abstract
5A06 aluminum alloy and DP1180 ultrahigh-strength steel dissimilar metals were joined by plasma arc welding with AlCu6 welding wire. The interface of AlCu6 weld/steel joint was characterized by SEM, electron backscatter diffraction (EBSD) and focused ion beam-transmission electron microscopy (FIB-TEM). The results revealed that Fe–Al intermetallic compounds (IMCs) layer with double structure was formed at AlCu6 weld/steel interface, which were Fe 4 Al 13 layer with needle-like shape and Fe 2 Al 5 layer with tongue-shape. Fe 2 Al 5 grains exhibited a clear preferential orientation in the [001] crystal direction and a strong silk texture in the <001> direction, but were weaker in Fe 4 Al 13 grains. The average Schmidt factor of the Fe 4 Al 13 and Fe 2 Al 5 grains in the interface zone was 0.269 and 0.287, respectively, corresponding to the high brittleness and hardness of Fe 4 Al 13 and Fe 2 Al 5 . The maximum tensile strength of the joints was 118.0 MPa and the aluminum/steel joints all fractured at the interface zones. The brittle IMCs of Fe 4 Al 13 and Fe 2 Al 5 played a crucial role in contributing to the joint fracture.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Dissimilar MIG-CMT weld-brazing of aluminium to steel: a review10.1016/j.jallcom.2018.12.336 ↗
2. Lightweight design of automobile component using high strength steel based on dent resistance10.1016/j.matdes.2004.09.010 ↗
3. The influences of nanoparticles on the microstructure evolution mechanism and mechanical properties of laser welded stainless steel/aluminum10.1016/j.jmrt.2024.08.043 ↗
4. Investigation of the tensile shear fracture of advanced high strength steel spot welds10.1016/j.engfailanal.2012.04.009 ↗
5. Hybrid laser/arc welding of advanced high strength steel to aluminum alloy by using structural transition insert10.1016/j.matdes.2015.03.022 ↗
6. Low cycle fatigue behaviour of ductile aluminium alloys using the inelastic energy approach10.1016/j.msea.2020.140385 ↗
7. Microstructure and fatigue damage mechanism of 6082-T6 aluminium alloy welded joint10.1088/2053-1591/abf9cd ↗
8. The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy10.1016/S1359-6454(02)00259-8 ↗
9. Microstructure development in pulsed laser welding of dual phase steel to aluminium alloy10.1016/j.promfg.2018.07.058 ↗
10. Microstructure and mechanical properties of electron beam welded dissimilar steel to Fe-Al alloy joints10.1016/j.msea.2016.09.050 ↗
11. Intermetallic FexAly -phases in a steel/Al-alloy fusion weld10.1007/s10853-006-0644-0 ↗
12. Interfacial characterization of joint between mild steel and aluminum alloy welded by resistance spot welding10.1016/j.matchar.2010.03.015 ↗
13. On the correlation between thermal cycle and formation of intermetallic phases at the interface of laser-welded aluminum-steel overlap joints
14. Dissimilar joining of aluminum alloy and low-alloy carbon steel by resistance spot welding10.1016/j.jmrt.2024.09.133 ↗
15. Dissimilar resistance spot welding of 6061-T6 aluminum alloy/St-12 carbon steel using a high entropy alloy interlayer10.1016/j.intermet.2020.106876 ↗
16. Microstructural and mechanical evolution of Al/steel interface with Fe2Al5 growth in resistance spot welding of aluminum to steel10.1016/j.jmapro.2018.06.024 ↗
17. Friction stir butt welding of strain-hardened aluminum alloy with high strength steel10.1016/j.msea.2018.09.035 ↗
18. Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds10.1016/j.jallcom.2017.04.272 ↗
19. On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys10.1016/j.actamat.2015.06.028 ↗
20. Development of Zn–15Al–xZr filler metals for Brazing 6061 aluminum alloy to stainless steel10.1016/j.msea.2015.11.004 ↗
21. Effect of process parameters on performances of TWIP steel/Al alloy dissimilar metals butt joints by laser offset welding10.1016/j.msea.2022.143746 ↗
22. Advanced characterization of intermetallic compounds in dissimilar aluminum-steel joints obtained by laser welding-brazing with Al–Si filler metals10.1016/j.matchar.2021.111345 ↗
23. Effect of filler wire composition on performance of Al/Galvanized steel joints by twin spot laser welding-brazing method10.1016/j.jmapro.2017.11.007 ↗
24. Effect of Si content on the interfacial reactions in laser welded-brazed Al/steel dissimilar butted joint10.1016/j.jmatprotec.2018.03.010 ↗
25. Enhancing the reliability of laser welded-brazed aluminum/stainless steel joints via laser-chemical hybrid surface texturing10.1016/j.tws.2024.111780 ↗
26. Improvement of laser welded TC4/CFRTP joint strength by combination of surface modification of MAO and laser texturing10.1016/j.tws.2023.111409 ↗
27. Microstructure and mechanical property of welding-brazing joint between aluminum and steel by micro-beam plasma welding
28. Interface characteristics and formation mechanism of plasma arc welding-brazing aluminum alloy/ultrahigh-strength steel joint
29. Hu · 2010
30. Review on the formation and inhibition mechanism of Fe-Al intermetallic compound
31. Multi-method identification and characterization of the intermetallic surface layers of hot-dip Al-coated steel: FeAl3 or Fe4Al13 and Fe2Al5 or Fe2Al5+x10.1016/j.surfcoat.2017.05.091 ↗
32. Morphology and formation of Fe-Al intermetallic layers on iron hot-dipped in Al-Mg-Si alloy melt10.1016/j.intermet.2014.06.003 ↗