journal article·2024-07Open access

Microstructures and tribological properties of MoS2/Mo2N multilayer gradient films deposited by reactive magnetron sputtering

Zhigang Yuan, Yucheng Li, Li Sun, Junfeng Yang, Shunqi Mei, Xiaoshuang Xiong, Qianfeng Fang, Zhen Chen, Ying Liu

Abstract

In order to compare the microstructures and tribological properties of films, pure Mo2N, pure MoS2, 3-layer and 13-layer MoS2/Mo2N gradient films were deposited by reactive magnetron sputtering. The crystalline structure, surface and cross-section morphologies, 3D surface topography, binding energy, hardness and tribological properties of films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), atom force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), nanoindenter, and wear tester, respectively. The results indicate that the preferred orientation of MoS2 in gradient films has changed. The surface and cross-section structures of gradient films become denser with increasing the number of gradient layers. Average surface roughness (Ra) of pure MoS2 film is the highest, and Ra of 13-layer film is the lowest. The binding energy of MoS2 in the composite layer of gradient film has changed. The hardness of gradient film is higher than that of MoS2 and lower than that of Mo2N. The wear resistance of gradient films is much better than that of pure MoS2, and this phenomenon is more obvious under high load conditions. The improvement in the wear resistance of gradient films is attributed to the increase of dense, hardness, H/E and H3/E2. In the initial stage of friction, the 3-layer gradient film can maintain low friction coefficient (≤0.15), which is attributed to the thick MoS2 surface layer. The wear resistance of 13-layer is much better than that of 3-layer gradient film, because it has higher hardness, higher H/E and H3/E2 than 3-layer gradient film.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Lubrication using a microstructurally engineered oxide: performance and mechanisms10.1023/A:1019187202237 ↗
2. Control of molybdenum disulfide basal plane orientation during coating growth in pulsed magnetron sputtering discharges10.1016/j.tsf.2009.01.190 ↗
3. Effect of crystallographic orientation on fretting wear behaviour of MoSx coatings in dry and humid air10.1016/S0040-6090(01)01141-5 ↗
4. Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear10.1038/35025020 ↗
5. Structural lubricity in soft and hard matter systems10.1038/s41467-020-18429-1 ↗
6. Determining the interlayer shearing in twisted bilayer MoS2 by nanoindentation10.1038/s41467-022-31685-7 ↗
7. Microstructure of cosputter-deposited metal- and oxide-MoS2 solid lubricant thin films10.1557/JMR.1998.0143 ↗
8. Morphological and frictional behavior of sputtered MoS2 films10.1016/0040-6090(82)90208-5 ↗
9. Frictional behavior of oxide graphene nanosheets as water-base lubricant additive10.1007/s00339-011-6636-1 ↗
10. Tailoring the corrosion and tribological performance of Ti-modified MoS2-based films in simulated seawater10.1016/j.jmrt.2022.09.061 ↗
11. Zhang Tribological behavior and wear mechanism of Ti/MoS2 films deposited on plasma nitrided CF170 steel sliding against different mating materials10.1016/j.vacuum.2021.110623 ↗
12. Performance and limitations of MoS2/Ti composite coated inserts10.1016/S0257-8972(03)00247-0 ↗
13. Tribological characteristics of MoS2 –Nb solid lubricant film in different tribo-test conditions10.1016/j.surfcoat.2008.08.048 ↗
14. Exploring the effect of V doping on the tribological mechanism of MoS2 coatings in atomic oxygen environment
15. Tribological behavior of MoS2/a-C:Si composite films in high-temperature air and vacuum environments10.1016/j.triboint.2023.108988 ↗
16. Structural, mechanical and tribological properties of Mo–S–N solid lubricant films10.1016/j.surfcoat.2016.04.040 ↗
17. Amorphous self-lubricant MoS2-C sputtered coating with high hardness10.1016/j.apsusc.2015.01.057 ↗
18. Self-lubricating Ni-P-MoS2 composite coatings10.1016/j.surfcoat.2016.09.078 ↗
19. Microstructure, mechanical and high-temperature tribological properties of MoS2-Cr-Ag composite films10.1016/j.surfcoat.2022.129135 ↗
20. Thermal and tribological properties of MoS2 doped graphite/copper composites by microwave sintering10.1016/j.jmrt.2021.11.053 ↗
21. Deposition of CrN–MoS2 thin films by D.C. magnetron sputtering10.1016/j.surfcoat.2004.08.013 ↗
22. Unbalanced magnetron sputtered Ti–Si–N: MoSx composite coatings for improvement of tribological properties10.1016/j.surfcoat.2004.10.053 ↗
23. Deposition of magnetron sputtered TiN+MoSx coating with Ti–TiN graded interlayer10.1016/j.surfcoat.2005.02.096 ↗
24. Structure, composition, and mechanical characterization of dc sputtered TiN-MoS2 nanocomposite thin films10.1016/j.surfcoat.2011.01.044 ↗
25. Microstructures and properties of Mo2N+MoS2 coatings deposited by direct current magnetron sputtering10.1016/j.vacuum.2020.109406 ↗
26. Growth and characteristics of self-assembled MoS2/Mo-S-C nanoperiod multilayers for enhanced tribological performance
27. Nanotribological properties and scratch resistance of MoS2 bilayer on a SiO2 bilayer on a SiO2/Si substrate10.1007/s40544-022-0595-8 ↗
28. Improving the tribological and corrosive properties of MoS2-based coatings by dual-doping and multilayer construction10.1016/j.apsusc.2017.12.167 ↗
29. On development and wear behavior of microwave processed functionally graded Ni-SiC clads on SS-304 substrate10.1007/s11665-017-3110-z ↗
30. Microstructure and tribological properties of self-lubricant gradient Ti(C, N)-based cermets10.1016/j.ijrmhm.2017.12.025 ↗
31. Design and preparation of gradient graphite/cermets self-lubricating composites10.1016/j.jmst.2017.09.018 ↗
32. A comparative study of multilayer and functionally graded coated tools in high-speed machining10.1007/s00170-011-3780-x ↗
33. Structure design of Al2O3/TiC/CaF2 multicomponent gradient self-lubricating ceramic composite and its tribological behaviors10.1016/j.ceramint.2017.12.199 ↗
34. Solution of the dynamic frictional contact problem between a functionally graded coating and a moving cylindrical punch10.1016/j.ijsolstr.2018.11.020 ↗
35. A novel strategy for designing Fe-Ni gradient multilayer coatings using laser-assisted electrodeposition and regulation mechanism10.1016/j.surfcoat.2022.129088 ↗
36. Novel gradient alloy steel with quasi-continuous ratios fabricated by SLM: material microstructure and wear mechanism10.1016/j.matchar.2021.111020 ↗
37. Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature10.1016/j.scib.2023.12.003 ↗
38. Pulsed DC magnetron sputtered MoSx–TiN composite coating for improved mechanical properties and tribological performance10.1016/j.surfcoat.2009.04.018 ↗
39. Microstructure characteristics and tribological properties of gradient Cu-MoS2 self-lubricating coating fabricated by selective laser melting of ink-printed metal nanoparticles10.1115/1.4063083 ↗
40. Effect of nitrogen pressure, bias voltage and substrate temperature on the phase structure of Mo–N coatings produced by cathodic arc PVD10.1016/S0257-8972(02)00866-6 ↗
41. The role of surface oxidation in friction processes on molybdenum nitride thin films10.1016/j.surfcoat.2004.07.119 ↗
42. Valence band photoemission study of the Ti-Mo-N system10.1016/S0040-6090(96)09082-7 ↗
43. The synthesis and characterisation of some xanthine complexes: evidence for the existence of oxygen involvement using O(6) and O(2)10.1016/S0020-1693(00)82271-9 ↗
44. Novel N-TiO2/SiO2/Fe3O4 nanocomposite as a photosensitizer with magnetism and visible light responsiveness for photodynamic inactivation of HeLa cells in vitro10.1016/j.ceramint.2019.04.036 ↗
45. Determination of peak positions and areas from wide-scan XPS spectra10.1002/sia.740150305 ↗
46. A comparative study of Ag doping effects on the electronic, optical, carrier conversion, photocatalytic and electrical properties of MoS210.1016/j.mseb.2021.115442 ↗
47. Excellent visible light responsive photocatalytic behavior of N-doped TiO2 toward decontamination of organic pollutants10.1016/j.jhazmat.2020.123857 ↗
48. Characterization and properties of quaternary Mo–Si–C–N coatings synthesized by magnetron sputtering technique10.1016/j.surfcoat.2010.11.058 ↗
49. Sulfidation study of molybdenum oxide using MoO3/SiO2/Si(100) model catalysts and Mo-IV3-Sulfur cluster compounds10.1006/jcat.1995.1335 ↗
50. XPS analysis of lithium intercalation in thin films of molybdenum oxysulphides10.1002/sia.740220146 ↗
51. Relationship between hardness and grain size in electrodeposited copper films10.1016/j.msea.2006.12.101 ↗
52. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
53. The influence of substrate bias on the surface morphology, microstructure and mechanical behaviour of TiNiN coatings10.1016/j.apsusc.2022.153107 ↗
54. Coating characteristics and tribological properties of sputter-deposited MoS2/metal composite coatings deposited by closed field unbalanced magnetron sputter ion plating10.1016/S0257-8972(00)00538-7 ↗
55. Enhanced mechanical, thermal, and tribological performance of 2D-laminated molybdenum disulfide/RGO nanohybrid filling phenolic resin composites10.1007/s42114-022-00511-5 ↗
56. Macro-superlubricity in sputtered MoS2-based films by decreasing edge pinning effect10.1007/s40544-022-0728-0 ↗
57. Wear in relation to friction — a review10.1016/S0043-1648(00)00382-3 ↗